Anderson Metals

{"id":7142798983348,"title":"Anderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe","handle":"anderson-metals-00069-1212-brass-tube-fitting-elbow-3-4-compression-x-3-4-male-pipe","description":"\u003ch3\u003eAnderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals compression fitting is made of brass and connects to\nNational Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also\ncalled \"ell,\" connects two pipes at a 90-degree angle to change the direction\nof flow between pipes. It connects to pipes or tubing on one end and an NPT\nmale connector on the other. This fitting is made of brass for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability.\nBrass can be connected to copper, brass, plastic, aluminum, and welded steel.\nThe operating temperatures range from -65 to 250 degrees F. It is suitable for\ncopper, brass, aluminum, and steel tubing and is for use with water, gasoline,\noil, and vacuum lines. Pipe and tube fittings are components used for\nconnecting, terminating, controlling flow, and changing the direction of\npiping in many different industries. Compression fittings do not require tools\nor sealants, and are useful in installations where a heat source, such as a\nsoldering torch, is prohibited. When purchasing fittings, consider the\napplication, as this will affect material type, shape, size, and required\ndurability. Fittings are available threaded or unthreaded, in many shapes,\nstyles, sizes, and schedules (pipe wall thickness).Anderson Metals\nmanufactures brass fittings, valves, and pipe nipples. The company, founded in\n1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree elbow for connecting two pipes or tubes at an angle\u003c\/li\u003e\n \u003cli\u003eFitting connects to pipes or tubing on one end and an NPT male connector on the other\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -65 to 250 degrees F\u003c\/li\u003e\n \u003cli\u003eSuitable for copper, brass, aluminum, and steel tubing\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-25T05:26:08+10:00","created_at":"2022-05-25T05:26:12+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41526714826932,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006PKJGCW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe","public_title":null,"options":["Default Title"],"price":9800,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":"719852101437","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B006PKJGCW.jpg?v=1653460131","\/\/auspowers.com\/cdn\/shop\/products\/81F9e-w5hHL.jpg?v=1653420372","\/\/auspowers.com\/cdn\/shop\/products\/81fehO9jINL.jpg?v=1653420372"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKJGCW.jpg?v=1653460131","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe ","id":25964591382708,"position":1,"preview_image":{"aspect_ratio":0.856,"height":2234,"width":1913,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKJGCW.jpg?v=1653460131"},"aspect_ratio":0.856,"height":2234,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKJGCW.jpg?v=1653460131","width":1913},{"alt":"[Australia - AusPower] - Anderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe ","id":25959804272820,"position":2,"preview_image":{"aspect_ratio":1.126,"height":1424,"width":1604,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81F9e-w5hHL.jpg?v=1653420372"},"aspect_ratio":1.126,"height":1424,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81F9e-w5hHL.jpg?v=1653420372","width":1604},{"alt":"[Australia - AusPower] - Anderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe ","id":25959804305588,"position":3,"preview_image":{"aspect_ratio":1.61,"height":1360,"width":2190,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81fehO9jINL.jpg?v=1653420372"},"aspect_ratio":1.61,"height":1360,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81fehO9jINL.jpg?v=1653420372","width":2190}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 00069-1212 Brass Tube Fitting, Elbow, 3\/4\" Compression x 3\/4\" Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals compression fitting is made of brass and connects to\nNational Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also\ncalled \"ell,\" connects two pipes at a 90-degree angle to change the direction\nof flow between pipes. It connects to pipes or tubing on one end and an NPT\nmale connector on the other. This fitting is made of brass for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability.\nBrass can be connected to copper, brass, plastic, aluminum, and welded steel.\nThe operating temperatures range from -65 to 250 degrees F. It is suitable for\ncopper, brass, aluminum, and steel tubing and is for use with water, gasoline,\noil, and vacuum lines. Pipe and tube fittings are components used for\nconnecting, terminating, controlling flow, and changing the direction of\npiping in many different industries. Compression fittings do not require tools\nor sealants, and are useful in installations where a heat source, such as a\nsoldering torch, is prohibited. When purchasing fittings, consider the\napplication, as this will affect material type, shape, size, and required\ndurability. Fittings are available threaded or unthreaded, in many shapes,\nstyles, sizes, and schedules (pipe wall thickness).Anderson Metals\nmanufactures brass fittings, valves, and pipe nipples. The company, founded in\n1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree elbow for connecting two pipes or tubes at an angle\u003c\/li\u003e\n \u003cli\u003eFitting connects to pipes or tubing on one end and an NPT male connector on the other\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -65 to 250 degrees F\u003c\/li\u003e\n \u003cli\u003eSuitable for copper, brass, aluminum, and steel tubing\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7142803210420,"title":"Anderson Metals - 06102-06 06102 Brass Pipe Fitting, Barstock Cross, 3\/8\" x 3\/8\" x 3\/8\" x 3\/8\" NPT Female Pipe","handle":"anderson-metals-06102-06-06102-brass-pipe-fitting-barstock-cross-3-8-x-3-8-x-3-8-x-3-8-npt-female-pipe","description":"\u003ch3\u003eAnderson Metals - 06102-06 06102 Brass Pipe Fitting, Barstock Cross, 3\/8\" x 3\/8\" x 3\/8\" x 3\/8\" NPT Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06102 barstock cross is a brass pipe fitting with 3\/8\"\nfemale NPT threads. The cross fitting has four openings positioned at\n90-degrees from each other for connecting and branching four pipes. It has\nfemale National Pipe Taper (NPT) threads for connecting to male threaded\npipes, creating a tighter seal than straight threads and a locknut for\nincreased stability. This fitting is made of brass for corrosion resistance,\nductility at high temperatures, and low magnetic permeability. Brass can be\nconnected to copper, brass, plastic, aluminum, and welded steel. The barstock\ncross has fair vibration resistance and is suitable in low to medium pressure\napplications.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCross for connecting and branching four pipes\u003c\/li\u003e\n \u003cli\u003eFemale NPT threads for connecting to male threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-25T05:28:32+10:00","created_at":"2022-05-25T05:28:33+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":9500,"price_min":9500,"price_max":9500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41526719512756,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00D3CTXZ0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06102-06 06102 Brass Pipe Fitting, Barstock Cross, 3\/8\" x 3\/8\" x 3\/8\" x 3\/8\" NPT Female Pipe","public_title":null,"options":["Default Title"],"price":9500,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":"719852122029","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00D3CTXZ0.jpg?v=1653460241"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CTXZ0.jpg?v=1653460241","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06102-06 06102 Brass Pipe Fitting, Barstock Cross, 3\/8\" x 3\/8\" x 3\/8\" x 3\/8\" NPT Female Pipe ","id":25964599607476,"position":1,"preview_image":{"aspect_ratio":1.505,"height":1488,"width":2240,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CTXZ0.jpg?v=1653460241"},"aspect_ratio":1.505,"height":1488,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CTXZ0.jpg?v=1653460241","width":2240}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06102-06 06102 Brass Pipe Fitting, Barstock Cross, 3\/8\" x 3\/8\" x 3\/8\" x 3\/8\" NPT Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06102 barstock cross is a brass pipe fitting with 3\/8\"\nfemale NPT threads. The cross fitting has four openings positioned at\n90-degrees from each other for connecting and branching four pipes. It has\nfemale National Pipe Taper (NPT) threads for connecting to male threaded\npipes, creating a tighter seal than straight threads and a locknut for\nincreased stability. This fitting is made of brass for corrosion resistance,\nductility at high temperatures, and low magnetic permeability. Brass can be\nconnected to copper, brass, plastic, aluminum, and welded steel. The barstock\ncross has fair vibration resistance and is suitable in low to medium pressure\napplications.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCross for connecting and branching four pipes\u003c\/li\u003e\n \u003cli\u003eFemale NPT threads for connecting to male threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7143766196404,"title":"Anderson Metals - 06124-08 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1\/2\" Female Pipe x 1\/2\" Male Pipe 1\/2\" x 1\/2\"","handle":"anderson-metals-06124-08-brass-pipe-fitting-45-degree-barstock-street-elbow-1-2-female-pipe-x-1-2-male-pipe-1-2-x-1-2","description":"\u003ch3\u003eAnderson Metals - 06124-08 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1\/2\" Female Pipe x 1\/2\" Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals 45-degree street elbow pipe fitting is made of brass\nbarstock and has a female National Pipe Taper (NPT) threaded connection and a\nmale NPT threaded connection. This 45-degree street elbow fitting, or \"street\nell,\" connects two pipes, one with a male end and the other with a female end,\nat a 45-degree angle to change the direction of flow between pipes. It has\nfemale NPT threads on one end and male NPT threads on the other for connecting\na male and a female threaded pipe. The NPT threads create a tighter seal than\nstraight threads. This fitting is made from brass barstock for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability.\nBrass barstock is machined to creating a seamless, dense material that resists\nsplitting and leaking. Brass can be connected to copper, brass, plastic,\naluminum, and welded steel. The operating temperatures for this fitting range\nfrom -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American\nSociety for Testing and Materials (ASTM) B584 and American Society of\nMechanical Engineers (ASME)\/American National Standards Institute (ANSI) B16\nspecifications for quality assurance.Pipe fittings are components used for\nconnecting, terminating, controlling flow, and changing the direction of\npiping in many different industries. When purchasing pipe fittings, consider\nthe application, as this will affect material type, shape, size, and required\ndurability. Fittings are available threaded or unthreaded, in many shapes,\nstyles, sizes, and schedules (pipe wall thickness).Anderson Metals\nmanufactures brass fittings, valves, and pipe nipples. The company, founded in\n1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle\u003c\/li\u003e\n \u003cli\u003eFemale National Pipe Taper (NPT) threads on one end and male NPT threads on the other for connecting pipes with different ends\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-26T16:53:33+10:00","created_at":"2022-05-26T16:53:36+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":8100,"price_min":8100,"price_max":8100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41529941098676,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006PKKXDS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06124-08 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1\/2\" Female Pipe x 1\/2\" Male Pipe 1\/2\" x 1\/2\"","public_title":null,"options":["Default Title"],"price":8100,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"719852118282","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B006PKKXDS.jpg?v=1653549774","\/\/auspowers.com\/cdn\/shop\/products\/81DyYFoMndL.jpg?v=1653548016"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKXDS.jpg?v=1653549774","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06124-08 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1\/2\" Female Pipe x 1\/2\" Male Pipe 1\/2\" x 1\/2\" ","id":25976317345972,"position":1,"preview_image":{"aspect_ratio":0.866,"height":1242,"width":1075,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKXDS.jpg?v=1653549774"},"aspect_ratio":0.866,"height":1242,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKXDS.jpg?v=1653549774","width":1075},{"alt":"[Australia - AusPower] - Anderson Metals - 06124-08 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1\/2\" Female Pipe x 1\/2\" Male Pipe 1\/2\" x 1\/2\" ","id":25976098226356,"position":2,"preview_image":{"aspect_ratio":0.99,"height":1481,"width":1466,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81DyYFoMndL.jpg?v=1653548016"},"aspect_ratio":0.99,"height":1481,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81DyYFoMndL.jpg?v=1653548016","width":1466}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06124-08 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1\/2\" Female Pipe x 1\/2\" Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals 45-degree street elbow pipe fitting is made of brass\nbarstock and has a female National Pipe Taper (NPT) threaded connection and a\nmale NPT threaded connection. This 45-degree street elbow fitting, or \"street\nell,\" connects two pipes, one with a male end and the other with a female end,\nat a 45-degree angle to change the direction of flow between pipes. It has\nfemale NPT threads on one end and male NPT threads on the other for connecting\na male and a female threaded pipe. The NPT threads create a tighter seal than\nstraight threads. This fitting is made from brass barstock for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability.\nBrass barstock is machined to creating a seamless, dense material that resists\nsplitting and leaking. Brass can be connected to copper, brass, plastic,\naluminum, and welded steel. The operating temperatures for this fitting range\nfrom -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American\nSociety for Testing and Materials (ASTM) B584 and American Society of\nMechanical Engineers (ASME)\/American National Standards Institute (ANSI) B16\nspecifications for quality assurance.Pipe fittings are components used for\nconnecting, terminating, controlling flow, and changing the direction of\npiping in many different industries. When purchasing pipe fittings, consider\nthe application, as this will affect material type, shape, size, and required\ndurability. Fittings are available threaded or unthreaded, in many shapes,\nstyles, sizes, and schedules (pipe wall thickness).Anderson Metals\nmanufactures brass fittings, valves, and pipe nipples. The company, founded in\n1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle\u003c\/li\u003e\n \u003cli\u003eFemale National Pipe Taper (NPT) threads on one end and male NPT threads on the other for connecting pipes with different ends\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7145309667508,"title":"Anderson Metals - 06130-02 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/8\" NPT Male x 1\/8\" NPT Male Pipe","handle":"anderson-metals-06130-02-06130-brass-pipe-fitting-90-degree-barstock-elbow-1-8-npt-male-x-1-8-npt-male-pipe","description":"\u003ch3\u003eAnderson Metals - 06130-02 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/8\" NPT Male x 1\/8\" NPT Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06130 90 degree elbow is a brass pipe fitting with 1\/8\"\nmale NPT threads. The 90-degree elbow fitting, or \"ell,\" connects two pipes at\na 90-degree angle to change the direction of flow between pipes. It has male\nNational Pipe Taper (NPT) threads for connecting to female threaded pipes,\ncreating a tighter seal than straight threads. This fitting is made of brass\nfor corrosion resistance, ductility at high temperatures, and low magnetic\npermeability. Brass can be connected to copper, brass, plastic, aluminum, and\nwelded steel.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree elbow for connecting two pipes or fittings at an angle\u003c\/li\u003e\n \u003cli\u003eMale NPT threads for connecting to female threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-29T18:30:30+10:00","created_at":"2022-05-29T18:30:31+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":6700,"price_min":6700,"price_max":6700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41535431246004,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00D3CVWGI","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06130-02 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/8\" NPT Male x 1\/8\" NPT Male Pipe","public_title":null,"options":["Default Title"],"price":6700,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"719852122005","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVWGI.jpg?v=1653893340"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVWGI.jpg?v=1653893340","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06130-02 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/8\" NPT Male x 1\/8\" NPT Male Pipe ","id":26014379573428,"position":1,"preview_image":{"aspect_ratio":1.505,"height":1488,"width":2240,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVWGI.jpg?v=1653893340"},"aspect_ratio":1.505,"height":1488,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVWGI.jpg?v=1653893340","width":2240}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06130-02 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/8\" NPT Male x 1\/8\" NPT Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06130 90 degree elbow is a brass pipe fitting with 1\/8\"\nmale NPT threads. The 90-degree elbow fitting, or \"ell,\" connects two pipes at\na 90-degree angle to change the direction of flow between pipes. It has male\nNational Pipe Taper (NPT) threads for connecting to female threaded pipes,\ncreating a tighter seal than straight threads. This fitting is made of brass\nfor corrosion resistance, ductility at high temperatures, and low magnetic\npermeability. Brass can be connected to copper, brass, plastic, aluminum, and\nwelded steel.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree elbow for connecting two pipes or fittings at an angle\u003c\/li\u003e\n \u003cli\u003eMale NPT threads for connecting to female threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7144434041012,"title":"Anderson Metals - 06130-04 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/4\" NPT Male x 1\/4\" NPT Male Pipe 0.25 Inch","handle":"anderson-metals-06130-04-06130-brass-pipe-fitting-90-degree-barstock-elbow-1-4-npt-male-x-1-4-npt-male-pipe-0-25-inch","description":"\u003ch3\u003eAnderson Metals - 06130-04 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/4\" NPT Male x 1\/4\" NPT Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06130 90-degree barstock elbow is a brass pipe fitting\nwith 1\/4\" male NPT threads. The 90-degree elbow fitting, or \"ell,\" connects\ntwo pipes at a 90-degree angle to change the direction of flow between pipes.\nIt has male National Pipe Taper (NPT) threads for connecting to female\nthreaded pipes, creating a tighter seal than straight threads. This fitting is\nmade of brass for corrosion resistance, ductility at high temperatures, and\nlow magnetic permeability. Brass can be connected to copper, brass, plastic,\naluminum, and welded steel. The 90-degree barstock street elbow has fair\nvibration resistance and is suitable in low to medium pressure\napplications.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree elbow for connecting two pipes at an angle\u003c\/li\u003e\n \u003cli\u003eMale NPT threads for connecting to female threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-27T16:55:49+10:00","created_at":"2022-05-27T16:55:50+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":7200,"price_min":7200,"price_max":7200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41532332015796,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00D3CVY5W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06130-04 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/4\" NPT Male x 1\/4\" NPT Male Pipe 0.25 Inch","public_title":null,"options":["Default Title"],"price":7200,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"719852121992","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVY5W.jpg?v=1653637456"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVY5W.jpg?v=1653637456","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06130-04 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/4\" NPT Male x 1\/4\" NPT Male Pipe 0.25 Inch ","id":25990126207156,"position":1,"preview_image":{"aspect_ratio":1.505,"height":1488,"width":2240,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVY5W.jpg?v=1653637456"},"aspect_ratio":1.505,"height":1488,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CVY5W.jpg?v=1653637456","width":2240}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06130-04 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1\/4\" NPT Male x 1\/4\" NPT Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06130 90-degree barstock elbow is a brass pipe fitting\nwith 1\/4\" male NPT threads. The 90-degree elbow fitting, or \"ell,\" connects\ntwo pipes at a 90-degree angle to change the direction of flow between pipes.\nIt has male National Pipe Taper (NPT) threads for connecting to female\nthreaded pipes, creating a tighter seal than straight threads. This fitting is\nmade of brass for corrosion resistance, ductility at high temperatures, and\nlow magnetic permeability. Brass can be connected to copper, brass, plastic,\naluminum, and welded steel. The 90-degree barstock street elbow has fair\nvibration resistance and is suitable in low to medium pressure\napplications.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree elbow for connecting two pipes at an angle\u003c\/li\u003e\n \u003cli\u003eMale NPT threads for connecting to female threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7142800228532,"title":"Anderson Metals - 06227-08 Brass Pipe Fitting, Forged Street Tee, 1\/2\" Female Pipe x 1\/2\" Male Pipe x 1\/2\" Female Pipe 1\/2\" x 1\/2\" x 1\/2\"","handle":"anderson-metals-06227-08-brass-pipe-fitting-forged-street-tee-1-2-female-pipe-x-1-2-male-pipe-x-1-2-female-pipe-1-2-x-1-2-x-1-2","description":"\u003ch3\u003eAnderson Metals - 06227-08 Brass Pipe Fitting, Forged Street Tee, 1\/2\" Female Pipe x 1\/2\" Male Pipe x 1\/2\" Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals street tee pipe fitting is made of forged brass and has\nfemale and male National Pipe Taper (NPT) threaded connections. This street\ntee is a T-shaped fitting with three openings used to connect and branch three\nfemale and male pipes, two on the main run and one branch at a 90-degree angle\nfrom the middle of the tee. Pipe dimensions for tees are represented as A x B\nx C. \"A\" and \"B\" indicate the main run on the fitting, and \"C\" indicates the\nbranch. It has female and male NPT threads on either end of the main run and\nfemale NPT threads on the branch outlet for connecting to three threaded\npipes. The NPT threads create a tighter seal than straight threads. This\nfitting is made of brass for corrosion resistance, ductility at high\ntemperatures, and low magnetic permeability, and it is forged to increase the\nmaterial's strength and resistance to mechanical shock and vibration. The\noperating temperatures for this fitting range from -53 to 121 degrees C (-65\nto 250 degrees F). This fitting meets American Society for Testing and\nMaterials (ASTM) B584 and American Society of Mechanical Engineers\n(ASME)\/American National Standards Institute (ANSI) B16 specifications for\nquality assurance.Pipe fittings are components used for connecting,\nterminating, controlling flow, and changing the direction of piping in many\ndifferent industries. When purchasing pipe fittings, consider the application,\nas this will affect material type, shape, size, and required durability.\nFittings are available threaded or unthreaded, in many shapes, styles, sizes,\nand schedules (pipe wall thickness).Anderson Metals manufactures brass\nfittings, valves, and pipe nipples. The company, founded in 1951, is\nheadquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eStreet tee with three openings for connecting and branching three pipes with different ends\u003c\/li\u003e\n \u003cli\u003eFemale and male National Pipe Taper (NPT) threads on two ends and female NPT threads on the branch for connecting three threaded pipes\u003c\/li\u003e\n \u003cli\u003eForged brass for corrosion resistance, ductility at high temperatures, and durability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-25T05:27:03+10:00","created_at":"2022-05-25T05:27:05+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":9400,"price_min":9400,"price_max":9400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41526716432564,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006PKKZEU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06227-08 Brass Pipe Fitting, Forged Street Tee, 1\/2\" Female Pipe x 1\/2\" Male Pipe x 1\/2\" Female Pipe 1\/2\" x 1\/2\" x 1\/2\"","public_title":null,"options":["Default Title"],"price":9400,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":"719852124290","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZEU.jpg?v=1653460168","\/\/auspowers.com\/cdn\/shop\/products\/81TFOL5MUIL.jpg?v=1653420426"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZEU.jpg?v=1653460168","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06227-08 Brass Pipe Fitting, Forged Street Tee, 1\/2\" Female Pipe x 1\/2\" Male Pipe x 1\/2\" Female Pipe 1\/2\" x 1\/2\" x 1\/2\" ","id":25964594430132,"position":1,"preview_image":{"aspect_ratio":1.063,"height":1142,"width":1214,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZEU.jpg?v=1653460168"},"aspect_ratio":1.063,"height":1142,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZEU.jpg?v=1653460168","width":1214},{"alt":"[Australia - AusPower] - Anderson Metals - 06227-08 Brass Pipe Fitting, Forged Street Tee, 1\/2\" Female Pipe x 1\/2\" Male Pipe x 1\/2\" Female Pipe 1\/2\" x 1\/2\" x 1\/2\" ","id":25959807746228,"position":2,"preview_image":{"aspect_ratio":1.382,"height":1266,"width":1749,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81TFOL5MUIL.jpg?v=1653420426"},"aspect_ratio":1.382,"height":1266,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81TFOL5MUIL.jpg?v=1653420426","width":1749}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06227-08 Brass Pipe Fitting, Forged Street Tee, 1\/2\" Female Pipe x 1\/2\" Male Pipe x 1\/2\" Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals street tee pipe fitting is made of forged brass and has\nfemale and male National Pipe Taper (NPT) threaded connections. This street\ntee is a T-shaped fitting with three openings used to connect and branch three\nfemale and male pipes, two on the main run and one branch at a 90-degree angle\nfrom the middle of the tee. Pipe dimensions for tees are represented as A x B\nx C. \"A\" and \"B\" indicate the main run on the fitting, and \"C\" indicates the\nbranch. It has female and male NPT threads on either end of the main run and\nfemale NPT threads on the branch outlet for connecting to three threaded\npipes. The NPT threads create a tighter seal than straight threads. This\nfitting is made of brass for corrosion resistance, ductility at high\ntemperatures, and low magnetic permeability, and it is forged to increase the\nmaterial's strength and resistance to mechanical shock and vibration. The\noperating temperatures for this fitting range from -53 to 121 degrees C (-65\nto 250 degrees F). This fitting meets American Society for Testing and\nMaterials (ASTM) B584 and American Society of Mechanical Engineers\n(ASME)\/American National Standards Institute (ANSI) B16 specifications for\nquality assurance.Pipe fittings are components used for connecting,\nterminating, controlling flow, and changing the direction of piping in many\ndifferent industries. When purchasing pipe fittings, consider the application,\nas this will affect material type, shape, size, and required durability.\nFittings are available threaded or unthreaded, in many shapes, styles, sizes,\nand schedules (pipe wall thickness).Anderson Metals manufactures brass\nfittings, valves, and pipe nipples. The company, founded in 1951, is\nheadquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eStreet tee with three openings for connecting and branching three pipes with different ends\u003c\/li\u003e\n \u003cli\u003eFemale and male National Pipe Taper (NPT) threads on two ends and female NPT threads on the branch for connecting three threaded pipes\u003c\/li\u003e\n \u003cli\u003eForged brass for corrosion resistance, ductility at high temperatures, and durability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7144973926580,"title":"Anderson Metals - 06228-0402 Brass Pipe Fitting, Forged Reducing Street Elbow, 1\/4\" Female Pipe x 1\/8\" Male Pipe","handle":"anderson-metals-06228-0402-brass-pipe-fitting-forged-reducing-street-elbow-1-4-female-pipe-x-1-8-male-pipe","description":"\u003ch3\u003eAnderson Metals - 06228-0402 Brass Pipe Fitting, Forged Reducing Street Elbow, 1\/4\" Female Pipe x 1\/8\" Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals 90-degree reducing street elbow pipe fitting is made of\nforged brass and has a female National Pipe Taper (NPT) threaded connection\nand a male NPT threaded connection. This 90-degree reducing street elbow\nfitting connects two pipes with different diameters, one with a male end and\nthe other with a female end, at a 90-degree angle to change the direction of\nflow between pipes. It has female NPT threads on one end and male NPT threads\non the other for connecting a male and a female threaded pipe. The NPT threads\ncreate a tighter seal than straight threads. This fitting is made of brass for\ncorrosion resistance, ductility at high temperatures, and low magnetic\npermeability, and it is forged to increase the material's strength and\nresistance to mechanical shock and vibration. The operating temperatures for\nthis fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This\nfitting meets American Society for Testing and Materials (ASTM) B584 and\nAmerican Society of Mechanical Engineers (ASME)\/American National Standards\nInstitute (ANSI) B16 specifications for quality assurance.Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize, and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree reducing street elbow for connecting a male-ended and a female-ended pipe with different diameters at an angle\u003c\/li\u003e\n \u003cli\u003eFemale National Pipe Taper (NPT) threads on one end and male NPT threads on the other for connecting pipes with different ends\u003c\/li\u003e\n \u003cli\u003eForged brass for corrosion resistance, ductility at high temperatures, and durability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-28T17:45:09+10:00","created_at":"2022-05-28T17:45:12+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":7000,"price_min":7000,"price_max":7000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41534462689460,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006PKKZL8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06228-0402 Brass Pipe Fitting, Forged Reducing Street Elbow, 1\/4\" Female Pipe x 1\/8\" Male Pipe","public_title":null,"options":["Default Title"],"price":7000,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"719852118343","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZL8.jpg?v=1653808168","\/\/auspowers.com\/cdn\/shop\/products\/81ql_7CiCHL.jpg?v=1653723912"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZL8.jpg?v=1653808168","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06228-0402 Brass Pipe Fitting, Forged Reducing Street Elbow, 1\/4\" Female Pipe x 1\/8\" Male Pipe ","id":26006516138164,"position":1,"preview_image":{"aspect_ratio":0.726,"height":1770,"width":1285,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZL8.jpg?v=1653808168"},"aspect_ratio":0.726,"height":1770,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKKZL8.jpg?v=1653808168","width":1285},{"alt":"[Australia - AusPower] - Anderson Metals - 06228-0402 Brass Pipe Fitting, Forged Reducing Street Elbow, 1\/4\" Female Pipe x 1\/8\" Male Pipe ","id":25999345287348,"position":2,"preview_image":{"aspect_ratio":0.628,"height":1644,"width":1032,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81ql_7CiCHL.jpg?v=1653723912"},"aspect_ratio":0.628,"height":1644,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81ql_7CiCHL.jpg?v=1653723912","width":1032}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06228-0402 Brass Pipe Fitting, Forged Reducing Street Elbow, 1\/4\" Female Pipe x 1\/8\" Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals 90-degree reducing street elbow pipe fitting is made of\nforged brass and has a female National Pipe Taper (NPT) threaded connection\nand a male NPT threaded connection. This 90-degree reducing street elbow\nfitting connects two pipes with different diameters, one with a male end and\nthe other with a female end, at a 90-degree angle to change the direction of\nflow between pipes. It has female NPT threads on one end and male NPT threads\non the other for connecting a male and a female threaded pipe. The NPT threads\ncreate a tighter seal than straight threads. This fitting is made of brass for\ncorrosion resistance, ductility at high temperatures, and low magnetic\npermeability, and it is forged to increase the material's strength and\nresistance to mechanical shock and vibration. The operating temperatures for\nthis fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This\nfitting meets American Society for Testing and Materials (ASTM) B584 and\nAmerican Society of Mechanical Engineers (ASME)\/American National Standards\nInstitute (ANSI) B16 specifications for quality assurance.Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize, and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e90-degree reducing street elbow for connecting a male-ended and a female-ended pipe with different diameters at an angle\u003c\/li\u003e\n \u003cli\u003eFemale National Pipe Taper (NPT) threads on one end and male NPT threads on the other for connecting pipes with different ends\u003c\/li\u003e\n \u003cli\u003eForged brass for corrosion resistance, ductility at high temperatures, and durability\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7142800883892,"title":"Anderson Metals - 06232-08 06232 Brass Pipe Fitting, Forged Tee, 1\/2\" NPT Male x 1\/2\" NPT Male x 1\/2\" NPT Male Pipe","handle":"anderson-metals-06232-08-06232-brass-pipe-fitting-forged-tee-1-2-npt-male-x-1-2-npt-male-x-1-2-npt-male-pipe","description":"\u003ch3\u003eAnderson Metals - 06232-08 06232 Brass Pipe Fitting, Forged Tee, 1\/2\" NPT Male x 1\/2\" NPT Male x 1\/2\" NPT Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06232 forged tee is a brass pipe fitting with 1\/2\" male\nNPT threads. The forged tee fitting is T-shaped and has three openings to\nconnect and branch three pipes, two on the main run and one branch at a\n90-degree angle from the middle of the tee. Pipe dimensions for tees are\nrepresented as A x B x C. \"A\" and \"B\" indicate the main run on the fitting,\nand \"C\" indicates the branch. It has male National Pipe Taper (NPT) threads\nfor connecting to female threaded pipes, creating a tighter seal than straight\nthreads. This fitting is made of brass for corrosion resistance, ductility at\nhigh temperatures, and low magnetic permeability. Brass can be connected to\ncopper, brass, plastic, aluminum, and welded steel. The forged tee has fair\nvibration resistance and is suitable in low to medium pressure\napplications.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eForged tee with three openings for connecting and branching three pipes\u003c\/li\u003e\n \u003cli\u003eMale NPT threads for connecting to female threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-25T05:27:22+10:00","created_at":"2022-05-25T05:27:24+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41526717218996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00D3CWFLE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 06232-08 06232 Brass Pipe Fitting, Forged Tee, 1\/2\" NPT Male x 1\/2\" NPT Male x 1\/2\" NPT Male Pipe","public_title":null,"options":["Default Title"],"price":8400,"weight":113,"compare_at_price":null,"inventory_management":null,"barcode":"719852123521","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00D3CWFLE.jpg?v=1653460187"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CWFLE.jpg?v=1653460187","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 06232-08 06232 Brass Pipe Fitting, Forged Tee, 1\/2\" NPT Male x 1\/2\" NPT Male x 1\/2\" NPT Male Pipe ","id":25964595380404,"position":1,"preview_image":{"aspect_ratio":1.505,"height":1488,"width":2240,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CWFLE.jpg?v=1653460187"},"aspect_ratio":1.505,"height":1488,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00D3CWFLE.jpg?v=1653460187","width":2240}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 06232-08 06232 Brass Pipe Fitting, Forged Tee, 1\/2\" NPT Male x 1\/2\" NPT Male x 1\/2\" NPT Male Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals 06232 forged tee is a brass pipe fitting with 1\/2\" male\nNPT threads. The forged tee fitting is T-shaped and has three openings to\nconnect and branch three pipes, two on the main run and one branch at a\n90-degree angle from the middle of the tee. Pipe dimensions for tees are\nrepresented as A x B x C. \"A\" and \"B\" indicate the main run on the fitting,\nand \"C\" indicates the branch. It has male National Pipe Taper (NPT) threads\nfor connecting to female threaded pipes, creating a tighter seal than straight\nthreads. This fitting is made of brass for corrosion resistance, ductility at\nhigh temperatures, and low magnetic permeability. Brass can be connected to\ncopper, brass, plastic, aluminum, and welded steel. The forged tee has fair\nvibration resistance and is suitable in low to medium pressure\napplications.Pipe fittings are components used for connecting, terminating,\ncontrolling flow, and changing the direction of piping in many different\nindustries. When purchasing pipe fittings, consider the application, as this\nwill affect material type, shape, size and required durability. Fittings are\navailable threaded or unthreaded, in many shapes, styles, sizes, and schedules\n(pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and\npipe nipples. The company, founded in 1951, is headquartered in Kansas City,\nMO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eForged tee with three openings for connecting and branching three pipes\u003c\/li\u003e\n \u003cli\u003eMale NPT threads for connecting to female threaded pipes\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7144433287348,"title":"Anderson Metals - 07002-1212 Brass Hose Fitting, Connector, 3\/4\" Barb x 3\/4\" Female Pipe 3\/4\" Barb x 3\/4\" NPT Female","handle":"anderson-metals-07002-1212-brass-hose-fitting-connector-3-4-barb-x-3-4-female-pipe-3-4-barb-x-3-4-npt-female","description":"\u003ch3\u003eAnderson Metals - 07002-1212 Brass Hose Fitting, Connector, 3\/4\" Barb x 3\/4\" Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals hose fitting is made of brass and connects hose to\nthreaded pipe conforming to the National Pipe Thread (NPT) standard. This\nadapter is for a fixed connection between plastic or rubber hose and pipe made\nof copper, nylon, or plastic. A barbed fitting on one end creates a tight seal\non flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or\nferrule (sold separately), and a female NPT connector on the other end\nconnects to threaded pipe. This fitting is made of brass for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability. The\nfitting has a temperature range of 32 to 200 degrees F. Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness). Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAdapter for connecting pipes or fittings of different types\u003c\/li\u003e\n \u003cli\u003eFitting connects to hose on one end and has an NPT female connector on the other\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eBarbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)\u003c\/li\u003e\n \u003cli\u003eFor use with plastic or rubber hose\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-27T16:54:17+10:00","created_at":"2022-05-27T16:54:19+10:00","vendor":"Anderson Metals","type":"Barbed Fittings","tags":["industrial"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41532317466804,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006PKL544","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 07002-1212 Brass Hose Fitting, Connector, 3\/4\" Barb x 3\/4\" Female Pipe 3\/4\" Barb x 3\/4\" NPT Female","public_title":null,"options":["Default Title"],"price":8400,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"719852122166","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B006PKL544.jpg?v=1653637392","\/\/auspowers.com\/cdn\/shop\/products\/715QVsOZqzL.jpg?v=1653634459"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKL544.jpg?v=1653637392","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 07002-1212 Brass Hose Fitting, Connector, 3\/4\" Barb x 3\/4\" Female Pipe 3\/4\" Barb x 3\/4\" NPT Female ","id":25990123552948,"position":1,"preview_image":{"aspect_ratio":1.439,"height":1207,"width":1737,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKL544.jpg?v=1653637392"},"aspect_ratio":1.439,"height":1207,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKL544.jpg?v=1653637392","width":1737},{"alt":"[Australia - AusPower] - Anderson Metals - 07002-1212 Brass Hose Fitting, Connector, 3\/4\" Barb x 3\/4\" Female Pipe 3\/4\" Barb x 3\/4\" NPT Female ","id":25989828968628,"position":2,"preview_image":{"aspect_ratio":1.734,"height":1096,"width":1901,"src":"\/\/auspowers.com\/cdn\/shop\/products\/715QVsOZqzL.jpg?v=1653634459"},"aspect_ratio":1.734,"height":1096,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/715QVsOZqzL.jpg?v=1653634459","width":1901}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 07002-1212 Brass Hose Fitting, Connector, 3\/4\" Barb x 3\/4\" Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals hose fitting is made of brass and connects hose to\nthreaded pipe conforming to the National Pipe Thread (NPT) standard. This\nadapter is for a fixed connection between plastic or rubber hose and pipe made\nof copper, nylon, or plastic. A barbed fitting on one end creates a tight seal\non flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or\nferrule (sold separately), and a female NPT connector on the other end\nconnects to threaded pipe. This fitting is made of brass for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability. The\nfitting has a temperature range of 32 to 200 degrees F. Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness). Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAdapter for connecting pipes or fittings of different types\u003c\/li\u003e\n \u003cli\u003eFitting connects to hose on one end and has an NPT female connector on the other\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eBarbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)\u003c\/li\u003e\n \u003cli\u003eFor use with plastic or rubber hose\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7144430895284,"title":"Anderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3\/8\" Barb x 3\/8\" Male Flare 3\/8\" Barb x 3\/8\" NPT Male Flare","handle":"anderson-metals-07004-0606-brass-hose-fitting-connector-3-8-barb-x-3-8-male-flare-3-8-barb-x-3-8-npt-male-flare","description":"\u003ch3\u003eAnderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3\/8\" Barb x 3\/8\" Male Flare\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals hose fitting is made of brass and connects hose to\nthreaded pipe conforming to the National Pipe Thread (NPT) standard. This\nadapter is for a fixed connection between plastic or rubber hose and pipe made\nof copper, nylon, or plastic. A barbed fitting on one end creates a tight seal\non flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or\nferrule (sold separately), and a flared male NPT connector on the other end\nconnects to threaded pipe. This fitting is made of brass for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability. The\nfitting has a temperature range of 32 to 200 degrees F. Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness). Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAdapter for connecting pipes or fittings of different types\u003c\/li\u003e\n \u003cli\u003eFitting connects to hose on one end and has a flared NPT male connector on the other\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eBarbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)\u003c\/li\u003e\n \u003cli\u003eFor use with plastic or rubber hose\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-27T16:51:20+10:00","created_at":"2022-05-27T16:51:23+10:00","vendor":"Anderson Metals","type":"Barbed Fittings","tags":["industrial"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41532303179956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B006PKL7G0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3\/8\" Barb x 3\/8\" Male Flare 3\/8\" Barb x 3\/8\" NPT Male Flare","public_title":null,"options":["Default Title"],"price":8800,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"719852124719","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B006PKL7G0.jpg?v=1653637242","\/\/auspowers.com\/cdn\/shop\/products\/71u9EOClBTL.jpg?v=1653634283"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKL7G0.jpg?v=1653637242","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3\/8\" Barb x 3\/8\" Male Flare 3\/8\" Barb x 3\/8\" NPT Male Flare ","id":25990118932660,"position":1,"preview_image":{"aspect_ratio":2.381,"height":810,"width":1929,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKL7G0.jpg?v=1653637242"},"aspect_ratio":2.381,"height":810,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B006PKL7G0.jpg?v=1653637242","width":1929},{"alt":"[Australia - AusPower] - Anderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3\/8\" Barb x 3\/8\" Male Flare 3\/8\" Barb x 3\/8\" NPT Male Flare ","id":25989816058036,"position":2,"preview_image":{"aspect_ratio":3.821,"height":652,"width":2491,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71u9EOClBTL.jpg?v=1653634283"},"aspect_ratio":3.821,"height":652,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71u9EOClBTL.jpg?v=1653634283","width":2491}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 07004-0606 Brass Hose Fitting, Connector, 3\/8\" Barb x 3\/8\" Male Flare\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Anderson Metals hose fitting is made of brass and connects hose to\nthreaded pipe conforming to the National Pipe Thread (NPT) standard. This\nadapter is for a fixed connection between plastic or rubber hose and pipe made\nof copper, nylon, or plastic. A barbed fitting on one end creates a tight seal\non flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or\nferrule (sold separately), and a flared male NPT connector on the other end\nconnects to threaded pipe. This fitting is made of brass for corrosion\nresistance, ductility at high temperatures, and low magnetic permeability. The\nfitting has a temperature range of 32 to 200 degrees F. Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness). Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAdapter for connecting pipes or fittings of different types\u003c\/li\u003e\n \u003cli\u003eFitting connects to hose on one end and has a flared NPT male connector on the other\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003cli\u003eBarbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)\u003c\/li\u003e\n \u003cli\u003eFor use with plastic or rubber hose\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7134770692276,"title":"Anderson Metals - 38101-20 38101 Red Brass Pipe Fitting, Tee, 1-1\/4\" x 1-1\/4\" x 1-1\/4\" Female Pipe","handle":"anderson-metals-38101-20-38101-red-brass-pipe-fitting-tee-1-1-4-x-1-1-4-x-1-1-4-female-pipe","description":"\u003ch3\u003eAnderson Metals - 38101-20 38101 Red Brass Pipe Fitting, Tee, 1-1\/4\" x 1-1\/4\" x 1-1\/4\" Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe tee fitting is T-shaped and has three openings to connect and branch three\npipes, two on the main run and one branch at a 90-degree angle from the middle\nof the tee. Pipe dimensions for tees are represented as A x B x C. \"A\" and \"B\"\nindicate the main run on the fitting, and \"C\" indicates the branch. It has\nfemale threads for connecting to male threaded pipes. This fitting is made\nfrom red brass for high strength, better corrosion resistance than stainless\nsteel, and greater ease in machining than yellow brass.Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTee with three openings for connecting and branching three pipes\u003c\/li\u003e\n \u003cli\u003eFemale pipe threads for connecting to male threaded pipes\u003c\/li\u003e\n \u003cli\u003eRed brass for high strength, ease of machining, and better corrosion resistance than stainless steel\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-15T20:54:21+10:00","created_at":"2022-05-15T20:54:24+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":12900,"price_min":12900,"price_max":12900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41498082214068,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000DZBLB4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 38101-20 38101 Red Brass Pipe Fitting, Tee, 1-1\/4\" x 1-1\/4\" x 1-1\/4\" Female Pipe","public_title":null,"options":["Default Title"],"price":12900,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":"032888401464","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000DZBLB4.jpg?v=1652684573","\/\/auspowers.com\/cdn\/shop\/products\/81mFPzKW4uL.jpg?v=1652612064"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000DZBLB4.jpg?v=1652684573","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 38101-20 38101 Red Brass Pipe Fitting, Tee, 1-1\/4\" x 1-1\/4\" x 1-1\/4\" Female Pipe ","id":25875587137716,"position":1,"preview_image":{"aspect_ratio":1.176,"height":1787,"width":2101,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000DZBLB4.jpg?v=1652684573"},"aspect_ratio":1.176,"height":1787,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000DZBLB4.jpg?v=1652684573","width":2101},{"alt":"[Australia - AusPower] - Anderson Metals - 38101-20 38101 Red Brass Pipe Fitting, Tee, 1-1\/4\" x 1-1\/4\" x 1-1\/4\" Female Pipe ","id":25868739608756,"position":2,"preview_image":{"aspect_ratio":1.22,"height":1348,"width":1644,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81mFPzKW4uL.jpg?v=1652612064"},"aspect_ratio":1.22,"height":1348,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81mFPzKW4uL.jpg?v=1652612064","width":1644}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 38101-20 38101 Red Brass Pipe Fitting, Tee, 1-1\/4\" x 1-1\/4\" x 1-1\/4\" Female Pipe\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe tee fitting is T-shaped and has three openings to connect and branch three\npipes, two on the main run and one branch at a 90-degree angle from the middle\nof the tee. Pipe dimensions for tees are represented as A x B x C. \"A\" and \"B\"\nindicate the main run on the fitting, and \"C\" indicates the branch. It has\nfemale threads for connecting to male threaded pipes. This fitting is made\nfrom red brass for high strength, better corrosion resistance than stainless\nsteel, and greater ease in machining than yellow brass.Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTee with three openings for connecting and branching three pipes\u003c\/li\u003e\n \u003cli\u003eFemale pipe threads for connecting to male threaded pipes\u003c\/li\u003e\n \u003cli\u003eRed brass for high strength, ease of machining, and better corrosion resistance than stainless steel\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7144951742644,"title":"Anderson Metals - 38103-32 Brass Pipe Fitting, Coupling, 2\" Female 2 Inch 1","handle":"anderson-metals-38103-32-brass-pipe-fitting-coupling-2-female-2-inch-1","description":"\u003ch3\u003eAnderson Metals - 38103-32 Brass Pipe Fitting, Coupling, 2\" Female\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals coupling pipe fitting is made of red brass and has female\nNational Pipe Taper (NPT) threaded connections. This coupling fitting connects\ntwo pipes going in the same direction with the same diameter to extend a\nstraight run. It has female NPT threads for connecting to male threaded pipes,\ncreating a tighter seal than straight threads. This fitting is made from red\nbrass for high strength, better corrosion resistance than stainless steel, and\ngreater ease in machining than yellow brass. The operating temperatures for\nthis fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This\nfitting meets American Society for Testing and Materials (ASTM) B584 and\nAmerican Society of Mechanical Engineers (ASME)\/American National Standards\nInstitute (ANSI) B16 specifications for quality assurance.Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize, and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCoupling for connecting two pipes with the same diameter in a straight run\u003c\/li\u003e\n \u003cli\u003eFemale National Pipe Taper (NPT) threads for connecting to male threaded pipes\u003c\/li\u003e\n \u003cli\u003eRed brass for high strength, ease of machining, and better corrosion resistance than stainless steel\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-28T17:00:49+10:00","created_at":"2022-05-28T17:00:52+10:00","vendor":"Anderson Metals","type":"Pipe Fittings","tags":["industrial"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41534419763380,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000WVYJYK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Anderson Metals - 38103-32 Brass Pipe Fitting, Coupling, 2\" Female 2 Inch 1","public_title":null,"options":["Default Title"],"price":11400,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"0719852917960","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000WVYJYK.jpg?v=1653805558","\/\/auspowers.com\/cdn\/shop\/products\/81kdZUT7cJL.jpg?v=1653721252"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000WVYJYK.jpg?v=1653805558","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Anderson Metals - 38103-32 Brass Pipe Fitting, Coupling, 2\" Female 2 Inch 1 ","id":26006285484212,"position":1,"preview_image":{"aspect_ratio":1.144,"height":1406,"width":1608,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000WVYJYK.jpg?v=1653805558"},"aspect_ratio":1.144,"height":1406,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000WVYJYK.jpg?v=1653805558","width":1608},{"alt":"[Australia - AusPower] - Anderson Metals - 38103-32 Brass Pipe Fitting, Coupling, 2\" Female 2 Inch 1 ","id":25999027077300,"position":2,"preview_image":{"aspect_ratio":1.002,"height":1239,"width":1241,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81kdZUT7cJL.jpg?v=1653721252"},"aspect_ratio":1.002,"height":1239,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81kdZUT7cJL.jpg?v=1653721252","width":1241}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAnderson Metals - 38103-32 Brass Pipe Fitting, Coupling, 2\" Female\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Anderson Metals coupling pipe fitting is made of red brass and has female\nNational Pipe Taper (NPT) threaded connections. This coupling fitting connects\ntwo pipes going in the same direction with the same diameter to extend a\nstraight run. It has female NPT threads for connecting to male threaded pipes,\ncreating a tighter seal than straight threads. This fitting is made from red\nbrass for high strength, better corrosion resistance than stainless steel, and\ngreater ease in machining than yellow brass. The operating temperatures for\nthis fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This\nfitting meets American Society for Testing and Materials (ASTM) B584 and\nAmerican Society of Mechanical Engineers (ASME)\/American National Standards\nInstitute (ANSI) B16 specifications for quality assurance.Pipe fittings are\ncomponents used for connecting, terminating, controlling flow, and changing\nthe direction of piping in many different industries. When purchasing pipe\nfittings, consider the application, as this will affect material type, shape,\nsize, and required durability. Fittings are available threaded or unthreaded,\nin many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson\nMetals manufactures brass fittings, valves, and pipe nipples. The company,\nfounded in 1951, is headquartered in Kansas City, MO.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCoupling for connecting two pipes with the same diameter in a straight run\u003c\/li\u003e\n \u003cli\u003eFemale National Pipe Taper (NPT) threads for connecting to male threaded pipes\u003c\/li\u003e\n \u003cli\u003eRed brass for high strength, ease of machining, and better corrosion resistance than stainless steel\u003c\/li\u003e\n \u003cli\u003eOperating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)\u003c\/li\u003e\n \u003cli\u003eMeets specifications ASTM B584 and ASME\/ANSI B16 for quality assurance\u003c\/li\u003e\n \u003cli\u003eThese fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}