Adafruit

{"id":7135921799348,"title":"12V Plastic Water Solenoid Valve","handle":"12v-plastic-water-solenoid-valve","description":"\u003ch3\u003e12V Plastic Water Solenoid Valve\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eControl the flow of fluid using the flow of electrons! This liquid valve would\nmake a great addition to your robotic gardening project. There are two 1\/2\"\n(Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to\nthe two terminals, the valve opens and water can push through. The valve has a\ngasket arrangement inside, so there is a minimum pressure requirement of 0.02\nMpa (3 PSI). Also, liquid can only flow one direction. We tried this solenoid\nat various DC voltages and found we could actuate it down at 6VDC (although it\nwas a little slower to open). Here is the current draw table for various\nvoltages. We suggest a TIP120 or N-Channel power FET with a 1N4001 kickback\ndiode to drive this from a microcontroller pin. For a power supply, our 9V 1A\nor 12V 1A power adapters will do the job. These solenoids are not rated for\nfood safety or use with anything but water.Voltage Current6V 160 mA7V 190 mA8V\n220 mA9V 240 mA10V 270 mA11V 300 mA12V 320 mA\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTwo 1\/2\" (Nominal non-taped National Pipe) outlets\u003c\/li\u003e\n \u003cli\u003eSingle direction flow\u003c\/li\u003e\n \u003cli\u003eValve has a gasket arrangement inside requries minimum pressure requirement of 0.02 Mpa (3 PSI)\u003c\/li\u003e\n \u003cli\u003eCan actuate down at 6VDC\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-17T21:19:20+10:00","created_at":"2022-05-17T21:19:25+10:00","vendor":"Adafruit","type":"Solenoid Valves","tags":["industrial"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41502146363572,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00K0TKJCU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"12V Plastic Water Solenoid Valve","public_title":null,"options":["Default Title"],"price":12400,"weight":340,"compare_at_price":null,"inventory_management":null,"barcode":"720189973130","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00K0TKJCU.jpg?v=1652855677","\/\/auspowers.com\/cdn\/shop\/products\/61PyF1To8vL.jpg?v=1652786366","\/\/auspowers.com\/cdn\/shop\/products\/51wPn3SJ6qL.jpg?v=1652786366","\/\/auspowers.com\/cdn\/shop\/products\/51QuNQppKqL.jpg?v=1652786366","\/\/auspowers.com\/cdn\/shop\/products\/7172IN6GkhL.jpg?v=1652786366","\/\/auspowers.com\/cdn\/shop\/products\/51flgSp5wjL.jpg?v=1652786366"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00K0TKJCU.jpg?v=1652855677","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 12V Plastic Water Solenoid Valve ","id":25893158256820,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00K0TKJCU.jpg?v=1652855677"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00K0TKJCU.jpg?v=1652855677","width":1200},{"alt":"[Australia - AusPower] - 12V Plastic Water Solenoid Valve ","id":25886193451188,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61PyF1To8vL.jpg?v=1652786366"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61PyF1To8vL.jpg?v=1652786366","width":1200},{"alt":"[Australia - AusPower] - 12V Plastic Water Solenoid Valve ","id":25886193483956,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51wPn3SJ6qL.jpg?v=1652786366"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51wPn3SJ6qL.jpg?v=1652786366","width":1200},{"alt":"[Australia - AusPower] - 12V Plastic Water Solenoid Valve ","id":25886193516724,"position":4,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51QuNQppKqL.jpg?v=1652786366"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51QuNQppKqL.jpg?v=1652786366","width":1200},{"alt":"[Australia - AusPower] - 12V Plastic Water Solenoid Valve ","id":25886193549492,"position":5,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/7172IN6GkhL.jpg?v=1652786366"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/7172IN6GkhL.jpg?v=1652786366","width":1200},{"alt":"[Australia - AusPower] - 12V Plastic Water Solenoid Valve ","id":25886193582260,"position":6,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51flgSp5wjL.jpg?v=1652786366"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51flgSp5wjL.jpg?v=1652786366","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e12V Plastic Water Solenoid Valve\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eControl the flow of fluid using the flow of electrons! This liquid valve would\nmake a great addition to your robotic gardening project. There are two 1\/2\"\n(Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to\nthe two terminals, the valve opens and water can push through. The valve has a\ngasket arrangement inside, so there is a minimum pressure requirement of 0.02\nMpa (3 PSI). Also, liquid can only flow one direction. We tried this solenoid\nat various DC voltages and found we could actuate it down at 6VDC (although it\nwas a little slower to open). Here is the current draw table for various\nvoltages. We suggest a TIP120 or N-Channel power FET with a 1N4001 kickback\ndiode to drive this from a microcontroller pin. For a power supply, our 9V 1A\nor 12V 1A power adapters will do the job. These solenoids are not rated for\nfood safety or use with anything but water.Voltage Current6V 160 mA7V 190 mA8V\n220 mA9V 240 mA10V 270 mA11V 300 mA12V 320 mA\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTwo 1\/2\" (Nominal non-taped National Pipe) outlets\u003c\/li\u003e\n \u003cli\u003eSingle direction flow\u003c\/li\u003e\n \u003cli\u003eValve has a gasket arrangement inside requries minimum pressure requirement of 0.02 Mpa (3 PSI)\u003c\/li\u003e\n \u003cli\u003eCan actuate down at 6VDC\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7177680453812,"title":"16-Channel 12-bit PWM Servo Driver with I2C Interface","handle":"16-channel-12-bit-pwm-servo-driver-with-i2c-interface","description":"\u003ch3\u003e16-Channel 12-bit PWM Servo Driver with I2C Interface\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eYou want to make a cool robot, maybe a hexapod walker, or maybe just a piece\nof art with a lot of moving parts. Or maybe you want to drive a lot of LEDs\nwith precise PWM output. Then you realize that your microcontroller has a\nlimited number of PWM outputs! What now? You could give up OR you could just\nget this handy PWM and Servo driver breakout. When we saw this chip, we\nquickly realized what an excellent add-on this would be. Using only two pins,\ncontrol 16 free-running PWM outputs! You can even chain up 62 breakouts to\ncontrol up to 992 PWM outputs (which we would really like to see since it\nwould be glorious)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ei2c-controlled PWM driver with a built in clock\u003c\/li\u003e\n \u003cli\u003eSolder jumpers for the 6 address select pins\u003c\/li\u003e\n \u003cli\u003ePolarity protection on the terminal block input\u003c\/li\u003e\n \u003cli\u003e3 pin connectors in groups of 4 so you can plug in 16 servos at once\u003c\/li\u003e\n \u003cli\u003e220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-02T04:12:02+10:00","created_at":"2022-07-02T04:12:03+10:00","vendor":"Adafruit","type":"Motor Drives","tags":["industrial"],"price":12200,"price_min":12200,"price_max":12200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41625801425076,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00EIB0U7A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"16-Channel 12-bit PWM Servo Driver with I2C Interface","public_title":null,"options":["Default Title"],"price":12200,"weight":9,"compare_at_price":null,"inventory_management":null,"barcode":"700604230406","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00EIB0U7A.jpg?v=1656743770"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00EIB0U7A.jpg?v=1656743770","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 16-Channel 12-bit PWM Servo Driver with I2C Interface ","id":26375877361844,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00EIB0U7A.jpg?v=1656743770"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00EIB0U7A.jpg?v=1656743770","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e16-Channel 12-bit PWM Servo Driver with I2C Interface\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eYou want to make a cool robot, maybe a hexapod walker, or maybe just a piece\nof art with a lot of moving parts. Or maybe you want to drive a lot of LEDs\nwith precise PWM output. Then you realize that your microcontroller has a\nlimited number of PWM outputs! What now? You could give up OR you could just\nget this handy PWM and Servo driver breakout. When we saw this chip, we\nquickly realized what an excellent add-on this would be. Using only two pins,\ncontrol 16 free-running PWM outputs! You can even chain up 62 breakouts to\ncontrol up to 992 PWM outputs (which we would really like to see since it\nwould be glorious)\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ei2c-controlled PWM driver with a built in clock\u003c\/li\u003e\n \u003cli\u003eSolder jumpers for the 6 address select pins\u003c\/li\u003e\n \u003cli\u003ePolarity protection on the terminal block input\u003c\/li\u003e\n \u003cli\u003e3 pin connectors in groups of 4 so you can plug in 16 servos at once\u003c\/li\u003e\n \u003cli\u003e220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7176414888116,"title":"Adafruit 10K Precision Epoxy Thermistor [ADA372]","handle":"adafruit-10k-precision-epoxy-thermistor-ada372","description":"\u003ch3\u003eAdafruit 10K Precision Epoxy Thermistor [ADA372]\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eNeed to measure something damp? This epoxy-coated precision 1% 10K thermistor\nis an inexpensive way to measure temperature in weather or liquids. The\nresistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer\nand goes up as it gets cooler. For specific temperature-to-resistance, check\nthe lookup table. These are often used for air conditioners, water lines, and\nother places where they can get damp. The PVC coating of the wires is good up\nto 105 °C so this isn't good for very hot stuff. We even toss in an additional\n1% 10K resistor which you can use as calibration or for a resistor divider.\nTechnical Details Resistance at 25 degrees C: 10K B25\/50 = 3950 Thermal time\nconstant ~15 seconds Thermistor temperature range -55 °C to 125 °C 28 AWG PVC\nWire Dimensions: Diameter: 1.3mm \/ 0.05\" Length: At least 457mm\/18\" long\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEpoxy-coated\u003c\/li\u003e\n \u003cli\u003eMeasure temperature in weather or liquids\u003c\/li\u003e\n \u003cli\u003ePVC coating of the wires is good up to 105 C\u003c\/li\u003e\n \u003cli\u003eAdditional 1% 10K resistor which you can use as calibration or for a resistor divider\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-01T04:48:00+10:00","created_at":"2022-07-01T04:48:01+10:00","vendor":"Adafruit","type":"Thermistors","tags":["industrial"],"price":8900,"price_min":8900,"price_max":8900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41622829957300,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00XW2N5X2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 10K Precision Epoxy Thermistor [ADA372]","public_title":null,"options":["Default Title"],"price":8900,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"711978445365","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00XW2N5X2.jpg?v=1656658628"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2N5X2.jpg?v=1656658628","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 10K Precision Epoxy Thermistor [ADA372] ","id":26364871704756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2N5X2.jpg?v=1656658628"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2N5X2.jpg?v=1656658628","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 10K Precision Epoxy Thermistor [ADA372]\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eNeed to measure something damp? This epoxy-coated precision 1% 10K thermistor\nis an inexpensive way to measure temperature in weather or liquids. The\nresistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer\nand goes up as it gets cooler. For specific temperature-to-resistance, check\nthe lookup table. These are often used for air conditioners, water lines, and\nother places where they can get damp. The PVC coating of the wires is good up\nto 105 °C so this isn't good for very hot stuff. We even toss in an additional\n1% 10K resistor which you can use as calibration or for a resistor divider.\nTechnical Details Resistance at 25 degrees C: 10K B25\/50 = 3950 Thermal time\nconstant ~15 seconds Thermistor temperature range -55 °C to 125 °C 28 AWG PVC\nWire Dimensions: Diameter: 1.3mm \/ 0.05\" Length: At least 457mm\/18\" long\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEpoxy-coated\u003c\/li\u003e\n \u003cli\u003eMeasure temperature in weather or liquids\u003c\/li\u003e\n \u003cli\u003ePVC coating of the wires is good up to 105 C\u003c\/li\u003e\n \u003cli\u003eAdditional 1% 10K resistor which you can use as calibration or for a resistor divider\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7177676095668,"title":"Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477]","handle":"adafruit-16mm-illuminated-pushbutton-blue-momentary-ada1477","description":"\u003ch3\u003eAdafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477]\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eA switch is a switch, and an LED is an LED, but this LED illuminated button is\na lovely combination of both! It's a medium sized button, large enough to\npress easily but not too big that it gets in the way of your project panel. It\nhas a built in LED that can be controlled separately from the switch action -\neither to indicate or just to look good. The body is a black plastic with the\nLED built inside. There are two contacts for the button and two contacts for\nthe LED, one marked + and one -. The forward voltage of the LED is about 3V so\nconnect a 220 to 1000 ohm resistor in series just as you would with any other\nLED to your 3V or higher power supply. This particular button has a blue body\nand LED and is momentary, normally open. The two switch contacts are not\nconnected normally. When you push the button they will temporarily connect\nuntil the button is released. The LED is separated from the button, so you can\nmake it light up when pressed, light up when not pressed, always lit, etc.\nTechnical Details Max Dimensions: 18.06mm \/ 0.7\" x 18mm \/ 0.7\" x 29.4mm \/\n1.15\" Shaft Dimensions: 14.89mm \/ 0.58\" x 15.56mm \/ 0.6\" x 18.7mm \/ 0.73\"\nButton Height: 5mm \/ 0.2\" Button Height Depressed: 3.5mm \/ 0.15\" Weight: 4.6g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-02T04:09:25+10:00","created_at":"2022-07-02T04:09:29+10:00","vendor":"Adafruit","type":"Pushbutton Switches","tags":["industrial"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41625797230772,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00XW2LH0U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477]","public_title":null,"options":["Default Title"],"price":8000,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"0711978444139","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00XW2LH0U.jpg?v=1656743615","\/\/auspowers.com\/cdn\/shop\/products\/51QjwsDk93L.jpg?v=1656698969","\/\/auspowers.com\/cdn\/shop\/products\/41_OQRdXtAL.jpg?v=1656698969","\/\/auspowers.com\/cdn\/shop\/products\/51oF76PdqJL.jpg?v=1656698969","\/\/auspowers.com\/cdn\/shop\/products\/41CKfhaEuWL.jpg?v=1656698969"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2LH0U.jpg?v=1656743615","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477] ","id":26375855374516,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2LH0U.jpg?v=1656743615"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2LH0U.jpg?v=1656743615","width":500},{"alt":"[Australia - AusPower] - Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477] ","id":26370874114228,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51QjwsDk93L.jpg?v=1656698969"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51QjwsDk93L.jpg?v=1656698969","width":500},{"alt":"[Australia - AusPower] - Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477] ","id":26370874146996,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41_OQRdXtAL.jpg?v=1656698969"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41_OQRdXtAL.jpg?v=1656698969","width":500},{"alt":"[Australia - AusPower] - Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477] ","id":26370874179764,"position":4,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51oF76PdqJL.jpg?v=1656698969"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51oF76PdqJL.jpg?v=1656698969","width":500},{"alt":"[Australia - AusPower] - Adafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477] ","id":26370874212532,"position":5,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41CKfhaEuWL.jpg?v=1656698969"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41CKfhaEuWL.jpg?v=1656698969","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 16mm Illuminated Pushbutton - Blue Momentary [ADA1477]\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eA switch is a switch, and an LED is an LED, but this LED illuminated button is\na lovely combination of both! It's a medium sized button, large enough to\npress easily but not too big that it gets in the way of your project panel. It\nhas a built in LED that can be controlled separately from the switch action -\neither to indicate or just to look good. The body is a black plastic with the\nLED built inside. There are two contacts for the button and two contacts for\nthe LED, one marked + and one -. The forward voltage of the LED is about 3V so\nconnect a 220 to 1000 ohm resistor in series just as you would with any other\nLED to your 3V or higher power supply. This particular button has a blue body\nand LED and is momentary, normally open. The two switch contacts are not\nconnected normally. When you push the button they will temporarily connect\nuntil the button is released. The LED is separated from the button, so you can\nmake it light up when pressed, light up when not pressed, always lit, etc.\nTechnical Details Max Dimensions: 18.06mm \/ 0.7\" x 18mm \/ 0.7\" x 29.4mm \/\n1.15\" Shaft Dimensions: 14.89mm \/ 0.58\" x 15.56mm \/ 0.6\" x 18.7mm \/ 0.73\"\nButton Height: 5mm \/ 0.2\" Button Height Depressed: 3.5mm \/ 0.15\" Weight: 4.6g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7177698017460,"title":"Adafruit 3101 Soft Tactile Button 8mm 10 Count","handle":"adafruit-3101-soft-tactile-button-8mm-10-count","description":"\u003ch3\u003eAdafruit 3101 Soft Tactile Button 8mm 10 Count\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePut your project in stealth mode with these silent Soft Tactile Switch\nButtons. Tactile switches are standard input \"buttons\" on electronic projects.\nThese work best in a PCB but can be used on a solderless breadboard as shown\nin this tutorial. The pins are normally open (disconnected) and when the\nbutton is pressed they are momentarily closed. They come in a pack of 10,\nthey're pretty handy so you'll want to keep them around. These are great for\nprojects like the PiGrrl, PiGrrl 2, Pocket PiGrrl or PiGrrl Zero since the\nelastomer buttons feel better than the default clicky ones. The activation\nforce isn't linear or documented, but a similar switch is listed as 120gf.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSoft Tactile Switch Buttons\u003c\/li\u003e\n \u003cli\u003eTactile switches are standard input \"buttons\" on electronic projects.\u003c\/li\u003e\n \u003cli\u003epack of 10\u003c\/li\u003e\n \u003cli\u003e7.8mm x 7.8mm x 4.9mm \/ 0.3\" x 0.3\" x 0.2\"\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-02T04:24:09+10:00","created_at":"2022-07-02T04:24:13+10:00","vendor":"Adafruit","type":"Pushbutton Switches","tags":["industrial"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41625829441716,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07QZFQQ83","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 3101 Soft Tactile Button 8mm 10 Count","public_title":null,"options":["Default Title"],"price":8800,"weight":9,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07QZFQQ83.jpg?v=1656744170","\/\/auspowers.com\/cdn\/shop\/products\/41CPrEVmduL.jpg?v=1656699853","\/\/auspowers.com\/cdn\/shop\/products\/515WkVrK2IL.jpg?v=1656699853","\/\/auspowers.com\/cdn\/shop\/products\/514F4NcfkqL.jpg?v=1656699853"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07QZFQQ83.jpg?v=1656744170","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 3101 Soft Tactile Button 8mm 10 Count ","id":26375929594036,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07QZFQQ83.jpg?v=1656744170"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07QZFQQ83.jpg?v=1656744170","width":500},{"alt":"[Australia - AusPower] - Adafruit 3101 Soft Tactile Button 8mm 10 Count ","id":26371000139956,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41CPrEVmduL.jpg?v=1656699853"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41CPrEVmduL.jpg?v=1656699853","width":500},{"alt":"[Australia - AusPower] - Adafruit 3101 Soft Tactile Button 8mm 10 Count ","id":26371000172724,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/515WkVrK2IL.jpg?v=1656699853"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/515WkVrK2IL.jpg?v=1656699853","width":500},{"alt":"[Australia - AusPower] - Adafruit 3101 Soft Tactile Button 8mm 10 Count ","id":26371000205492,"position":4,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/514F4NcfkqL.jpg?v=1656699853"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/514F4NcfkqL.jpg?v=1656699853","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 3101 Soft Tactile Button 8mm 10 Count\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePut your project in stealth mode with these silent Soft Tactile Switch\nButtons. Tactile switches are standard input \"buttons\" on electronic projects.\nThese work best in a PCB but can be used on a solderless breadboard as shown\nin this tutorial. The pins are normally open (disconnected) and when the\nbutton is pressed they are momentarily closed. They come in a pack of 10,\nthey're pretty handy so you'll want to keep them around. These are great for\nprojects like the PiGrrl, PiGrrl 2, Pocket PiGrrl or PiGrrl Zero since the\nelastomer buttons feel better than the default clicky ones. The activation\nforce isn't linear or documented, but a similar switch is listed as 120gf.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSoft Tactile Switch Buttons\u003c\/li\u003e\n \u003cli\u003eTactile switches are standard input \"buttons\" on electronic projects.\u003c\/li\u003e\n \u003cli\u003epack of 10\u003c\/li\u003e\n \u003cli\u003e7.8mm x 7.8mm x 4.9mm \/ 0.3\" x 0.3\" x 0.2\"\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7175049052340,"title":"Adafruit 412 Push-Pull Solenoid, Small, 24VDC","handle":"adafruit-412-push-pull-solenoid-small-24vdc","description":"\u003ch3\u003eAdafruit 412 Push-Pull Solenoid, Small, 24VDC\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSolenoids are similar to electromagnets: composed of a large coil of copper\nwire with an armature (a cylinder of metal) in the center. When the coil is\npowered, the armature is pulled into the center of the coil. This allows the\nsolenoid to pull (from one end) or push (from the other). this solenoid is\nfairly small with a 30mm long body and a\" captive\" armature with a return\nspring. This means when energized with up to 24Vdc, the solenoid moves and\nwhen the voltage is removed, it springs back to the original position. Many\nlower cost solenoids are only one Type, push or pull, and may not have a\ncaptive armature (it just falls out) or doesn't have a return spring. This one\neven has handy mounting tabs making it a great multi-purpose solenoid. To\ndrive a solenoid you will need a power transistor and a diode, check this\ndiagram for how to wire it to an arduino or other microcontroller. You will\nneed a fairly good power supply to drive a solenoid because a lot of current\nwill rush into the solenoid to charge up the electro-magnetic, about 100MA, so\ndon't try to power it with a 9V battery! 24 DC operation (you can use 9-24 DC\nVolts, but lower voltage results in weaker\/slower operation). push or pull\nType with 5.5 mm throw. DC coil resistance: 100 ohms. 5 Newton starting force\n(24Vdc).\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003epackage dimensions :1.905 cm L x 5.842 cm W x 7.62 cm H\u003c\/li\u003e\n \u003cli\u003eProduct type :ELECTRONIC_COMPONENT\u003c\/li\u003e\n \u003cli\u003ecountry of origin :China\u003c\/li\u003e\n \u003cli\u003eThis allows the solenoid to pull or push\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-06-30T01:02:03+10:00","created_at":"2022-06-30T01:02:04+10:00","vendor":"Adafruit","type":"Solenoids","tags":["industrial"],"price":12900,"price_min":12900,"price_max":12900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41619656835252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00G9FHSN2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 412 Push-Pull Solenoid, Small, 24VDC","public_title":null,"options":["Default Title"],"price":12900,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"5055851142176","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00G9FHSN2.jpg?v=1656572112"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00G9FHSN2.jpg?v=1656572112","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 412 Push-Pull Solenoid, Small, 24VDC ","id":26348796510388,"position":1,"preview_image":{"aspect_ratio":1.073,"height":466,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00G9FHSN2.jpg?v=1656572112"},"aspect_ratio":1.073,"height":466,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00G9FHSN2.jpg?v=1656572112","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 412 Push-Pull Solenoid, Small, 24VDC\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSolenoids are similar to electromagnets: composed of a large coil of copper\nwire with an armature (a cylinder of metal) in the center. When the coil is\npowered, the armature is pulled into the center of the coil. This allows the\nsolenoid to pull (from one end) or push (from the other). this solenoid is\nfairly small with a 30mm long body and a\" captive\" armature with a return\nspring. This means when energized with up to 24Vdc, the solenoid moves and\nwhen the voltage is removed, it springs back to the original position. Many\nlower cost solenoids are only one Type, push or pull, and may not have a\ncaptive armature (it just falls out) or doesn't have a return spring. This one\neven has handy mounting tabs making it a great multi-purpose solenoid. To\ndrive a solenoid you will need a power transistor and a diode, check this\ndiagram for how to wire it to an arduino or other microcontroller. You will\nneed a fairly good power supply to drive a solenoid because a lot of current\nwill rush into the solenoid to charge up the electro-magnetic, about 100MA, so\ndon't try to power it with a 9V battery! 24 DC operation (you can use 9-24 DC\nVolts, but lower voltage results in weaker\/slower operation). push or pull\nType with 5.5 mm throw. DC coil resistance: 100 ohms. 5 Newton starting force\n(24Vdc).\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003epackage dimensions :1.905 cm L x 5.842 cm W x 7.62 cm H\u003c\/li\u003e\n \u003cli\u003eProduct type :ELECTRONIC_COMPONENT\u003c\/li\u003e\n \u003cli\u003ecountry of origin :China\u003c\/li\u003e\n \u003cli\u003eThis allows the solenoid to pull or push\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7170057142452,"title":"Adafruit 413 Push-Pull Solenoid, Large, 12VDC","handle":"adafruit-413-push-pull-solenoid-large-12vdc","description":"\u003ch3\u003eAdafruit 413 Push-Pull Solenoid, Large, 12VDC\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSolenoids are basically electromagnets: they are made of a big coil of copper\nwire with an armature in the middle. When the coil is energized, the slug is\npulled into the center of the coil. This makes the solenoid able to pull or\npush.This solenoid in particular is nice and strong, with a 40mm long body and\na captive armature with a return spring. This means that when activated with\nup to 12VDC, the solenoid moves and then the voltage is removed it springs\nback to the original position, which is quite handy. Many lower cost solenoids\nare only push type or only pull type and may not have a captive armature or do\nnot have a return spring. This solenoid has 4xM3 metric threaded holes in the\nbottom for easy mounting.To drive a solenoid you will need a power transistor\nand a diode, check this diagram for how to wire it to an Arduino or other\nmicrocontroller. You will need a fairly good power supply to drive a solenoid,\nas a lot of current will rush into the solenoid to charge up the electro-\nmagnet, about 250mA, so don't try to power it with a 9V battery. Works best\nwith a 12V power supply.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDiameter: 1.14 inch\u003c\/li\u003e\n \u003cli\u003eOverall length: 2.8 inch\u003c\/li\u003e\n \u003cli\u003e5.1 oz\/ 144 grams\u003c\/li\u003e\n \u003cli\u003e12 DC operation (you can use 9-12 DC volts, but lower voltage results in weaker\/slower operation)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-06-26T20:25:29+10:00","created_at":"2022-06-26T20:25:32+10:00","vendor":"Adafruit","type":"Solenoids","tags":["industrial"],"price":11100,"price_min":11100,"price_max":11100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41609643196596,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00R5CIDIW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 413 Push-Pull Solenoid, Large, 12VDC","public_title":null,"options":["Default Title"],"price":11100,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"715933137609","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00R5CIDIW.jpg?v=1656314130","\/\/auspowers.com\/cdn\/shop\/products\/41Q02Z-braL.jpg?v=1656239133","\/\/auspowers.com\/cdn\/shop\/products\/41ovHzk57xL.jpg?v=1656239133","\/\/auspowers.com\/cdn\/shop\/products\/41FSH7qbOjL.jpg?v=1656239133"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00R5CIDIW.jpg?v=1656314130","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 413 Push-Pull Solenoid, Large, 12VDC ","id":26305149337780,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00R5CIDIW.jpg?v=1656314130"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00R5CIDIW.jpg?v=1656314130","width":500},{"alt":"[Australia - AusPower] - Adafruit 413 Push-Pull Solenoid, Large, 12VDC ","id":26295777722548,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41Q02Z-braL.jpg?v=1656239133"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41Q02Z-braL.jpg?v=1656239133","width":500},{"alt":"[Australia - AusPower] - Adafruit 413 Push-Pull Solenoid, Large, 12VDC ","id":26295777755316,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41ovHzk57xL.jpg?v=1656239133"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41ovHzk57xL.jpg?v=1656239133","width":500},{"alt":"[Australia - AusPower] - Adafruit 413 Push-Pull Solenoid, Large, 12VDC ","id":26295777788084,"position":4,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41FSH7qbOjL.jpg?v=1656239133"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41FSH7qbOjL.jpg?v=1656239133","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 413 Push-Pull Solenoid, Large, 12VDC\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSolenoids are basically electromagnets: they are made of a big coil of copper\nwire with an armature in the middle. When the coil is energized, the slug is\npulled into the center of the coil. This makes the solenoid able to pull or\npush.This solenoid in particular is nice and strong, with a 40mm long body and\na captive armature with a return spring. This means that when activated with\nup to 12VDC, the solenoid moves and then the voltage is removed it springs\nback to the original position, which is quite handy. Many lower cost solenoids\nare only push type or only pull type and may not have a captive armature or do\nnot have a return spring. This solenoid has 4xM3 metric threaded holes in the\nbottom for easy mounting.To drive a solenoid you will need a power transistor\nand a diode, check this diagram for how to wire it to an Arduino or other\nmicrocontroller. You will need a fairly good power supply to drive a solenoid,\nas a lot of current will rush into the solenoid to charge up the electro-\nmagnet, about 250mA, so don't try to power it with a 9V battery. Works best\nwith a 12V power supply.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDiameter: 1.14 inch\u003c\/li\u003e\n \u003cli\u003eOverall length: 2.8 inch\u003c\/li\u003e\n \u003cli\u003e5.1 oz\/ 144 grams\u003c\/li\u003e\n \u003cli\u003e12 DC operation (you can use 9-12 DC volts, but lower voltage results in weaker\/slower operation)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7176436842676,"title":"Adafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long","handle":"adafruit-4210-jst-sh-4-pin-cable-qwiic-compatible-100mm-long","description":"\u003ch3\u003eAdafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis 4-wire cable is a little over 100mm \/ 4\" long and fitted with JST-SH\nfemale 4-pin connectors on both ends. Compared with the chunkier JST-PH these\nare 1mm pitch instead of 2mm, but still have a nice latching feel, while being\neasy to insert and remove. This cable can be used with Qwiic boards, to easily\nconnect sensors and drivers from one board to the other. The cables are made\nsymmetrically so don't worry about which side goes where! When used with Qwiic\nthe colors are: Red - 3.3VDC Power Black - Ground Blue - I2C SDA Data Yellow -\nI2C SCL Clock\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e4-wire cable is a little over 100mm \/ 4\" long\u003c\/li\u003e\n \u003cli\u003efitted with JST-SH female 4-pin connectors on both ends\u003c\/li\u003e\n \u003cli\u003eThis cable can be used with Qwiic boards,\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-01T05:04:24+10:00","created_at":"2022-07-01T05:04:28+10:00","vendor":"Adafruit","type":"Temperature Probes \u0026 Sensors","tags":["industrial"],"price":8100,"price_min":8100,"price_max":8100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41622866460852,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07SD226QW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long","public_title":null,"options":["Default Title"],"price":8100,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"4060137057403","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07SD226QW.jpg?v=1656659180","\/\/auspowers.com\/cdn\/shop\/products\/71oi8S-YzgL.jpg?v=1656615868","\/\/auspowers.com\/cdn\/shop\/products\/71_RjgzrAIL.jpg?v=1656615868"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07SD226QW.jpg?v=1656659180","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long ","id":26364925411508,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07SD226QW.jpg?v=1656659180"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07SD226QW.jpg?v=1656659180","width":1200},{"alt":"[Australia - AusPower] - Adafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long ","id":26357543829684,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71oi8S-YzgL.jpg?v=1656615868"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71oi8S-YzgL.jpg?v=1656615868","width":1200},{"alt":"[Australia - AusPower] - Adafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long ","id":26357543862452,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71_RjgzrAIL.jpg?v=1656615868"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71_RjgzrAIL.jpg?v=1656615868","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 4210 JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis 4-wire cable is a little over 100mm \/ 4\" long and fitted with JST-SH\nfemale 4-pin connectors on both ends. Compared with the chunkier JST-PH these\nare 1mm pitch instead of 2mm, but still have a nice latching feel, while being\neasy to insert and remove. This cable can be used with Qwiic boards, to easily\nconnect sensors and drivers from one board to the other. The cables are made\nsymmetrically so don't worry about which side goes where! When used with Qwiic\nthe colors are: Red - 3.3VDC Power Black - Ground Blue - I2C SDA Data Yellow -\nI2C SCL Clock\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e4-wire cable is a little over 100mm \/ 4\" long\u003c\/li\u003e\n \u003cli\u003efitted with JST-SH female 4-pin connectors on both ends\u003c\/li\u003e\n \u003cli\u003eThis cable can be used with Qwiic boards,\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7177665675444,"title":"Adafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels!","handle":"adafruit-4537-neopxl8-featherwing-for-feather-m4-8-x-dma-neopixels","description":"\u003ch3\u003eAdafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels!\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSince we first started carrying NeoPixels back in 2012, the chainable RGB LEDs\nhave taken over the world. And a big part of that success is due to the\nsimplicity of their wiring - just one data wire, no matter how many pixels\nyou've got. So no surprise they're everywhere, blinking away in art exhibits,\nmaker faire demos, DJ booths, decorations, and costumes. But, at some point,\nevery NeoPixel'er bumps into the constraints of that single-data-wire: the\ntiming is very picky and often time your code has to stop completely so that\nit can burst out the data without any interruptions. This requirement makes it\ntough to create fast-update lighting effects, and limits the number of pixels\nyou can drive before other hardware peripherals get attention. Resident pixel-\npro Paint Your Dragon (who coined the name NeoPixel dont-cha-know!) took on\nthis challenge and has succeeded gloriously. By carefully examining the\nATSAMD51 datasheet he noticed you could use the Timer 0 in 'waveform' mode,\nand create 8 unique waveforms over DMA that would handle all the pixel-pushing\nfor you. Thus were born the NeoPXL8 Arduino library and NeoPXL8 FeatherWing!\nThe library runs on our Feather M4 and handles all the NeoPixeling for you, up\nto 8 strands of concurrent DMA output each one can be 1750 RGB pixels long for\na total of 8 x 1750 = 14000 pixels. That leaves you some RAM for your code to\nrun in as well. Even though you could connect that many pixels, what we think\nthis 'Wing does best is take advantage of DMA + the SAMD51's blazingly-fast\n120MHz processor to manage animations for hundreds of pixels with ease If you\nhave a SAMD21 Feather, check out the sister product - NeoPXL8 FeatherWing for\nM0 boards. To make connection easy, this FeatherWing does the level-shifting\nand pin arrangements for you. All 8 strands have a level shifter that converts\nthe 3.3V logic level to 5V logic, there's a little switch-cap converter that\ngenerates the clean 5V power supply for you.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-02T03:58:51+10:00","created_at":"2022-07-02T03:58:54+10:00","vendor":"Adafruit","type":"Temperature Probes \u0026 Sensors","tags":["industrial"],"price":10600,"price_min":10600,"price_max":10600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41625769083060,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B085L6JX7Y","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels!","public_title":null,"options":["Default Title"],"price":10600,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B085L6JX7Y.jpg?v=1656743176","\/\/auspowers.com\/cdn\/shop\/products\/51rLtY0GkwL.jpg?v=1656698334","\/\/auspowers.com\/cdn\/shop\/products\/61AvEdf-XpL.jpg?v=1656698334"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B085L6JX7Y.jpg?v=1656743176","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels! ","id":26375804551348,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B085L6JX7Y.jpg?v=1656743176"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B085L6JX7Y.jpg?v=1656743176","width":500},{"alt":"[Australia - AusPower] - Adafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels! ","id":26370786820276,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51rLtY0GkwL.jpg?v=1656698334"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51rLtY0GkwL.jpg?v=1656698334","width":500},{"alt":"[Australia - AusPower] - Adafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels! ","id":26370786853044,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61AvEdf-XpL.jpg?v=1656698334"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61AvEdf-XpL.jpg?v=1656698334","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit 4537 NeoPXL8 FeatherWing for Feather M4-8 x DMA NeoPixels!\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSince we first started carrying NeoPixels back in 2012, the chainable RGB LEDs\nhave taken over the world. And a big part of that success is due to the\nsimplicity of their wiring - just one data wire, no matter how many pixels\nyou've got. So no surprise they're everywhere, blinking away in art exhibits,\nmaker faire demos, DJ booths, decorations, and costumes. But, at some point,\nevery NeoPixel'er bumps into the constraints of that single-data-wire: the\ntiming is very picky and often time your code has to stop completely so that\nit can burst out the data without any interruptions. This requirement makes it\ntough to create fast-update lighting effects, and limits the number of pixels\nyou can drive before other hardware peripherals get attention. Resident pixel-\npro Paint Your Dragon (who coined the name NeoPixel dont-cha-know!) took on\nthis challenge and has succeeded gloriously. By carefully examining the\nATSAMD51 datasheet he noticed you could use the Timer 0 in 'waveform' mode,\nand create 8 unique waveforms over DMA that would handle all the pixel-pushing\nfor you. Thus were born the NeoPXL8 Arduino library and NeoPXL8 FeatherWing!\nThe library runs on our Feather M4 and handles all the NeoPixeling for you, up\nto 8 strands of concurrent DMA output each one can be 1750 RGB pixels long for\na total of 8 x 1750 = 14000 pixels. That leaves you some RAM for your code to\nrun in as well. Even though you could connect that many pixels, what we think\nthis 'Wing does best is take advantage of DMA + the SAMD51's blazingly-fast\n120MHz processor to manage animations for hundreds of pixels with ease If you\nhave a SAMD21 Feather, check out the sister product - NeoPXL8 FeatherWing for\nM0 boards. To make connection easy, this FeatherWing does the level-shifting\nand pin arrangements for you. All 8 strands have a level shifter that converts\nthe 3.3V logic level to 5V logic, there's a little switch-cap converter that\ngenerates the clean 5V power supply for you.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7358462754996,"title":"Adafruit Accessories Piezo Buzzer PS1240 (1 piece)","handle":"adafruit-accessories-piezo-buzzer-ps1240-1-piece","description":"\u003ch3\u003eAdafruit Accessories Piezo Buzzer PS1240 (1 piece)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePiezo buzzers are used for making beeps, tones and alerts. This one is petite\nbut loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one\npin to ground (either one) and the other pin to a square wave out from a timer\nor microcontroller. For the loudest tones, stay around 4 KHz, but works quite\nwell from 2KHz to 10KHz. For extra loudness, you can connect both pins to a\nmicrocontroller and swap which pin is high or low ('differential drive') for\ndouble the volume.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e","published_at":"2023-03-01T18:59:39+11:00","created_at":"2023-03-01T18:59:45+11:00","vendor":"Adafruit","type":"","tags":["industrial_Dec2022"],"price":8700,"price_min":8700,"price_max":8700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42195097551028,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01BNNNYB4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Accessories Piezo Buzzer PS1240 (1 piece)","public_title":null,"options":["Default Title"],"price":8700,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"701851958198","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B01BNNNYB4.jpg?v=1677658164","\/\/auspowers.com\/cdn\/shop\/products\/61qFWI_4tXL.jpg?v=1677657585","\/\/auspowers.com\/cdn\/shop\/products\/41w9kqZJnoL.jpg?v=1677657585","\/\/auspowers.com\/cdn\/shop\/products\/61p7-bYjTrL.jpg?v=1677657585","\/\/auspowers.com\/cdn\/shop\/products\/511JnjfuCiL.jpg?v=1677657585"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B01BNNNYB4.jpg?v=1677658164","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit Accessories Piezo Buzzer PS1240 (1 piece) ","id":28310347186356,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B01BNNNYB4.jpg?v=1677658164"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B01BNNNYB4.jpg?v=1677658164","width":500},{"alt":"[Australia - AusPower] - Adafruit Accessories Piezo Buzzer PS1240 (1 piece) ","id":28310307602612,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61qFWI_4tXL.jpg?v=1677657585"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61qFWI_4tXL.jpg?v=1677657585","width":500},{"alt":"[Australia - AusPower] - Adafruit Accessories Piezo Buzzer PS1240 (1 piece) ","id":28310307635380,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41w9kqZJnoL.jpg?v=1677657585"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41w9kqZJnoL.jpg?v=1677657585","width":500},{"alt":"[Australia - AusPower] - Adafruit Accessories Piezo Buzzer PS1240 (1 piece) ","id":28310307668148,"position":4,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61p7-bYjTrL.jpg?v=1677657585"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61p7-bYjTrL.jpg?v=1677657585","width":500},{"alt":"[Australia - AusPower] - Adafruit Accessories Piezo Buzzer PS1240 (1 piece) ","id":28310307700916,"position":5,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/511JnjfuCiL.jpg?v=1677657585"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/511JnjfuCiL.jpg?v=1677657585","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit Accessories Piezo Buzzer PS1240 (1 piece)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePiezo buzzers are used for making beeps, tones and alerts. This one is petite\nbut loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one\npin to ground (either one) and the other pin to a square wave out from a timer\nor microcontroller. For the loudest tones, stay around 4 KHz, but works quite\nwell from 2KHz to 10KHz. For extra loudness, you can connect both pins to a\nmicrocontroller and swap which pin is high or low ('differential drive') for\ndouble the volume.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e"}

{"id":7358468849844,"title":"Adafruit Accessories Quad Level-Shifter (1 piece)","handle":"adafruit-accessories-quad-level-shifter-1-piece","description":"\u003ch3\u003eAdafruit Accessories Quad Level-Shifter (1 piece)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eLevel shifting chips let you connect 3V and 5V devices together safely. This\nchip is similar to others (such as the 74LVC125) except this one is\nparticularly good at converting 3V logic up to 5V. This is in demand\nespecially when connecting some 3V devices such as the Teensy 3 to NeoPixels!\nJust power the 74AHCT125 with 5V, it will detect 3V logic properly. You can\nalso use it to connect 5V logic out to 3V logic in, that's when you want to\npower the 74AHCT125 with 3V, it can safely read 5V logic on the input pins. To\nuse, apply ~5V power to the VCC pin, common ground to the ground pin, and tie\nthe \/OE (output enable) pins to ground. Data goes in on the A pins and goes\nout on the matching Y pins. Check the datasheet for the pinouts! Item\nSpecifics Current Output: 8mA Voltage - Supply: 4.5 V ~ 5.5 V Operating\nTemperature: -40ºC ~ 125ºC Size: 20mm x 6mm x 3mm \/ 0.8\" x 0.2\" x 0.1\" Height\nwith Pins: 7mm \/ 0.3\" Weight: 0.9g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExcellent level shifting chip\u003c\/li\u003e\n \u003cli\u003eVery good at converting 3V logic up to 5V\u003c\/li\u003e\n \u003cli\u003eYou'll want it when connecting 3V devices such as Teensy 3 to NeoPixels!\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2023-03-01T19:19:59+11:00","created_at":"2023-03-01T19:20:02+11:00","vendor":"Adafruit","type":"","tags":["industrial_Dec2022"],"price":7900,"price_min":7900,"price_max":7900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42195111116980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00XW2L39K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Accessories Quad Level-Shifter (1 piece)","public_title":null,"options":["Default Title"],"price":7900,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"711978445440","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00XW2L39K.jpg?v=1677659079","\/\/auspowers.com\/cdn\/shop\/products\/51Mn4FESvsL.jpg?v=1677658802"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2L39K.jpg?v=1677659079","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit Accessories Quad Level-Shifter (1 piece) ","id":28310430056628,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2L39K.jpg?v=1677659079"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00XW2L39K.jpg?v=1677659079","width":500},{"alt":"[Australia - AusPower] - Adafruit Accessories Quad Level-Shifter (1 piece) ","id":28310390603956,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51Mn4FESvsL.jpg?v=1677658802"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51Mn4FESvsL.jpg?v=1677658802","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit Accessories Quad Level-Shifter (1 piece)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eLevel shifting chips let you connect 3V and 5V devices together safely. This\nchip is similar to others (such as the 74LVC125) except this one is\nparticularly good at converting 3V logic up to 5V. This is in demand\nespecially when connecting some 3V devices such as the Teensy 3 to NeoPixels!\nJust power the 74AHCT125 with 5V, it will detect 3V logic properly. You can\nalso use it to connect 5V logic out to 3V logic in, that's when you want to\npower the 74AHCT125 with 3V, it can safely read 5V logic on the input pins. To\nuse, apply ~5V power to the VCC pin, common ground to the ground pin, and tie\nthe \/OE (output enable) pins to ground. Data goes in on the A pins and goes\nout on the matching Y pins. Check the datasheet for the pinouts! Item\nSpecifics Current Output: 8mA Voltage - Supply: 4.5 V ~ 5.5 V Operating\nTemperature: -40ºC ~ 125ºC Size: 20mm x 6mm x 3mm \/ 0.8\" x 0.2\" x 0.1\" Height\nwith Pins: 7mm \/ 0.3\" Weight: 0.9g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExcellent level shifting chip\u003c\/li\u003e\n \u003cli\u003eVery good at converting 3V logic up to 5V\u003c\/li\u003e\n \u003cli\u003eYou'll want it when connecting 3V devices such as Teensy 3 to NeoPixels!\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7176427143348,"title":"Adafruit Buzzer 5V - Breadboard friendly [ADA1536]","handle":"adafruit-buzzer-5v-breadboard-friendly-ada1536","description":"\u003ch3\u003eAdafruit Buzzer 5V - Breadboard friendly [ADA1536]\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and\nyou'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo,\nthis buzzer does not need an AC signal. Inside is a piezo plus the driver\ncircuitry that makes it oscillate at 2KHz. On one hand, that makes it really\ngreat for integrating into projects because you don't need an oscillating\ncontrol signal. On the other hand, you cannot change the frequency.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e5V\u003c\/li\u003e\n \u003cli\u003eDoes not need AC signal\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-07-01T04:57:25+10:00","created_at":"2022-07-01T04:57:31+10:00","vendor":"Adafruit","type":"Controllers","tags":["industrial"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41622848798900,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00SK8NHZ4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Buzzer 5V - Breadboard friendly [ADA1536]","public_title":null,"options":["Default Title"],"price":8400,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"0711978442173","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00SK8NHZ4.jpg?v=1656658956","\/\/auspowers.com\/cdn\/shop\/products\/51zGOAr1BHL.jpg?v=1656615451","\/\/auspowers.com\/cdn\/shop\/products\/51gQQFY9LsL.jpg?v=1656615451","\/\/auspowers.com\/cdn\/shop\/products\/61q2DXcHHcL.jpg?v=1656615451","\/\/auspowers.com\/cdn\/shop\/products\/6173Qnhjf0L.jpg?v=1656615452","\/\/auspowers.com\/cdn\/shop\/products\/41N170sbrrL.jpg?v=1656615452"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00SK8NHZ4.jpg?v=1656658956","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Adafruit Buzzer 5V - Breadboard friendly [ADA1536] ","id":26364894609588,"position":1,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00SK8NHZ4.jpg?v=1656658956"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00SK8NHZ4.jpg?v=1656658956","width":500},{"alt":"[Australia - AusPower] - Adafruit Buzzer 5V - Breadboard friendly [ADA1536] ","id":26357469380788,"position":2,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51zGOAr1BHL.jpg?v=1656615451"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51zGOAr1BHL.jpg?v=1656615451","width":500},{"alt":"[Australia - AusPower] - Adafruit Buzzer 5V - Breadboard friendly [ADA1536] ","id":26357469413556,"position":3,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51gQQFY9LsL.jpg?v=1656615451"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51gQQFY9LsL.jpg?v=1656615451","width":500},{"alt":"[Australia - AusPower] - Adafruit Buzzer 5V - Breadboard friendly [ADA1536] ","id":26357469446324,"position":4,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61q2DXcHHcL.jpg?v=1656615451"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61q2DXcHHcL.jpg?v=1656615451","width":500},{"alt":"[Australia - AusPower] - Adafruit Buzzer 5V - Breadboard friendly [ADA1536] ","id":26357469479092,"position":5,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/6173Qnhjf0L.jpg?v=1656615452"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/6173Qnhjf0L.jpg?v=1656615452","width":500},{"alt":"[Australia - AusPower] - Adafruit Buzzer 5V - Breadboard friendly [ADA1536] ","id":26357469511860,"position":6,"preview_image":{"aspect_ratio":1.333,"height":375,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41N170sbrrL.jpg?v=1656615452"},"aspect_ratio":1.333,"height":375,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41N170sbrrL.jpg?v=1656615452","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAdafruit Buzzer 5V - Breadboard friendly [ADA1536]\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHey want to hear a really loud noise? Apply 3V to 5V to this buzzer module and\nyou'll be rewarded with a loud 2KHz BEEEEEEEEEEEEEEEEEP. Unlike a plain piezo,\nthis buzzer does not need an AC signal. Inside is a piezo plus the driver\ncircuitry that makes it oscillate at 2KHz. On one hand, that makes it really\ngreat for integrating into projects because you don't need an oscillating\ncontrol signal. On the other hand, you cannot change the frequency.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e5V\u003c\/li\u003e\n \u003cli\u003eDoes not need AC signal\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}