Huco 103.06.1616.Z Size 06 Huco-Pol Single Universal Joint With Brass Yoke, Acetal, Inch, 0.125" Bore A, 0.125" Bore B, 0.24" OD, 1.07" Length
Huco 103.06.1616.Z Size 06 Huco-Pol Single Universal Joint With Brass Yoke, Acetal, Inch, 0.125" Bore A, 0.125" Bore B, 0.24" OD, 1.07" Length
This Huco Huco-Pol Acetal single universal joint has yokes, headed bore inserts, and cross pieces made of brass with a chromate and passivate finish for strength, durability, and resistance to corrosion. The hubs are black- oiled alloy steel for strength and corrosion resistance, and the Acetal body electrically isolates the shafts to prevent electrical arcing and circuit shortages. It supports up to 1000 revolutions per minute, and can operate in temperatures ranging from -4 to 140 degrees F (-20 to 60 degrees C). This Huco-Pol Acetal single universal joint is suitable for use in applications where misalignment results in low stress loads such as in electro-medical and laboratory equipment, business machines, and food processing systems, among others.Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.Huco Dynatork manufactures couplings, piston air motors, brakes, clutches, gear boxes and other transmission products. The company, founded in 1965, meets the quality assurance standards of the British Standards Institution (BSI), the International Organization for Standardization (ISO) and the Deutsches Institut für Normung (DIN), and is based in Hertfordshire, England.
Product Features
- Brass yokes, headed bore inserts, and cross pieces with a chromate and passivate finish for strength, durability, and resistance to corrosion
- Black-oiled alloy steel fasteners for strength and corrosion resistance
- Electrical isolation between shafts and Acetal housing to prevent electrical arcing and circuit shortages
- Operating temperatures range from -4 to 140 degrees F (-20 to 60 degrees C)
- For use in applications where misalignment results in low stress loads
Related Products
4Pcs Angle Linkage Ball Joint Ki...
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M8 (RH)
$131.00 AUD
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M8 (RH) Item Descriptions:-[Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.-[Rotation Angle]: With spring steel clip,...
Heyiarbeit 8mm to 10mm Single St...
Heyiarbeit 8mm to 10mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs 8 x 10 1 Pcs
$89.00 AUD
Heyiarbeit 8mm to 10mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs Heyiarbeit Single universal joint couplingSpecification:Material: MetalScrew Diameter: M4Length: 35mm/1.38"Outer Diameter: 16mm/0.63"Bore Diameter: 8x10mm/0.31"x0.39"Color: Silver ToneDescription:1.Universal steering shaft U joint coupler is e...
Zouminyy Motor Shaft Coupling Un...
Zouminyy Motor Shaft Coupling Universal Joint Connector U Joint Coupler ID 12mm OD 24mm for Model
$139.00 AUD
Zouminyy Motor Shaft Coupling Universal Joint Connector U Joint Coupler ID 12mm OD 24mm for Model Specification: Material: Metal Weight: Approx.128G/ 4.5Oz Length: Approx.56Mm/2.2In Inside Diameter: 12Mm/0.47In&Nbsp;&Nbsp; Outside Diameter: 24Mm/0.94In Package List: 1 Universal Joint 2 Screw Note: Please Allow Slight Error Due To Manua...
Lovejoy Size D2 Universal Joint ...
Lovejoy Size D2 Universal Joint Repair Kit 1
$124.00 AUD
Lovejoy Size D2 Universal Joint Repair Kit This Lovejoy universal joints D Series repair kit includes one block, one main pin, two half pins, and two rivet pins replacement parts for D Type universal joints with a single pin and joint. Repair kits are available for D2 -D14 Lovejoy universal joints. Assembly instructions provided for repair proce...
J.W. Winco 5LXF1/B DIN71802 Ball...
J.W. Winco 5LXF1/B DIN71802 Ball Joint, 8 mm Diameter, M5 x 0.8 Tapped Left Hand Thread, M5 x 0.8 Threaded Shank, 10 mm Thread Length with Safety Catch
$84.00 AUD
J.W. Winco 5LXF1/B DIN71802 Ball Joint, 8 mm Diameter, M5 x 0.8 Tapped Left Hand Thread, M5 x 0.8 Threaded Shank, 10 mm Thread Length with Safety Catch DIN 71802 steel angled ball joints consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the safety catch versions is 15°, and for the versions without safety c...
4Pcs Angle Linkage Ball Joint Ki...
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M10 (LH)
$130.00 AUD
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M10 (LH) Item Descriptions:-[Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.-[Rotation Angle]: With spring steel clip...
Heyiarbeit 5mm to 8mm Single Ste...
Heyiarbeit 5mm to 8mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs 5 x 8 1 Pcs
$88.00 AUD
Heyiarbeit 5mm to 8mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs Heyiarbeit Single universal joint couplingSpecification:Material: MetalScrew Diameter: M4Length: 35mm/1.38"Outer Diameter: 14mm/0.55"Bore Diameter: 5x8mm/0.20"x0.31"Color: Silver ToneDescription:1.Universal steering shaft U joint coupler is eas...
Autoly 4mm to 4mm Inner Bore...
Autoly 4mm to 4mm Inner Bore Diameter Rotatable Universal Joint Coupling Shaft Metal Flexible Shaft Coupler for RC Robot Boat Car Motor, with Screws(2 Pack)
$104.00 AUD
Autoly 4mm to 4mm Inner Bore Diameter Rotatable Universal Joint Coupling Shaft Metal Flexible Shaft Coupler for RC Robot Boat Car Motor, with Screws(2 Pack) Product Specifications: Color: Silver Material: Steel Inner Dia Size: 4mm / 5/32-inch Outer Diameter: 12mm / 0.47-inch Height: 52mm / 2.05-inch Package Content: 2 x Universal Joint Shaft Cou...
Bansbach Easylift 545 A5 M8 Fork...
Bansbach Easylift 545 A5 M8 Fork Head Endfitting, Steel, Right Hand Thread
$122.00 AUD
Bansbach Easylift 545 A5 M8 Fork Head Endfitting, Steel, Right Hand Thread a5 fork head with M8 threads, Length: 32mm, space between forks: 8mm, thickness: 16mm, through hole: 8mm, can be used with 8/19 and 10/22 gas springs Product Features Package Dimensions: 3 L x 1 H x 1 W (inches) Package Weight : 0.25 pounds ...
Lovejoy Size D4B Universal Joint...
Lovejoy Size D4B Universal Joint, 1/2" Round Bore and 1/2" Round Bore, No Keyway, No Setscrew, 0.75" Outer Diameter, 2.68" Overall Length
$233.00 AUD
Lovejoy Size D4B Universal Joint, 1/2" Round Bore and 1/2" Round Bore, No Keyway, No Setscrew, 0.75" Outer Diameter, 2.68" Overall Length This Lovejoy D Type steel single pin-and-block universal joint with round bored hubs is designed to connect two rotating shafts at angles up to 25 degrees. This universal joint compensates for angular misalign...
Heyiarbeit 3mm to 4mm Single Ste...
Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs 3 x 4 1 Pcs
$88.00 AUD
Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs Heyiarbeit Single universal joint couplingSpecification:Material: MetalScrew Diameter: M3Length: 23mm/0.91"Outer Diameter: 9mm/0.35"Bore Diameter: 3x4mm/0.12"x0.16"Color: Silver ToneDescription:1.Universal steering shaft U joint coupler is easy...
J.W. Winco 6LXF2/A DIN71802 Ball...
J.W. Winco 6LXF2/A DIN71802 Ball Joint, 10 mm Diameter, M6 x 1.0 Tapped Left Hand Thread, M6 x 1.0 Threaded Shank, 12.5 mm Thread Length
$84.00 AUD
J.W. Winco 6LXF2/A DIN71802 Ball Joint, 10 mm Diameter, M6 x 1.0 Tapped Left Hand Thread, M6 x 1.0 Threaded Shank, 12.5 mm Thread Length DIN 71802 steel angled ball joints consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the safety catch versions is 15°, and for the versions without safety catch is 18°. Fo...
4Pcs Angle Linkage Ball Joint Ki...
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements -M8 (LH and RH))
$144.00 AUD
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements -M8 (LH and RH)) Item Descriptions:-[Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.-[Rotation Angle]: With spring st...