- Home
- Industrial & Scientific:Power Transmission Products:Couplings, Collars & Universal Joiners:Universal Joints
Lovejoy Size D4B Universal Joint, 1/2" Round Bore and 1/2" Round Bore, No Keyway, No Setscrew, 0.75" Outer Diameter, 2.68" Overall Length
Lovejoy Size D4B Universal Joint, 1/2" Round Bore and 1/2" Round Bore, No Keyway, No Setscrew, 0.75" Outer Diameter, 2.68" Overall Length
This Lovejoy D Type steel single pin-and-block universal joint with round bored hubs is designed to connect two rotating shafts at angles up to 25 degrees. This universal joint compensates for angular misalignments and has a single joint configuration for high torsional stiffness and torque capacity. The hubs, center block, and pins are made of steel for strength and durability, and the bored hubs fit onto shafts without the need for machining. Operating temperatures range from -30 to 212 degrees F. For optimal wear and extended life, boots (sold separately) are recommended, and boot retaining grooves are standard on this design. This universal joint provides a uniform speed ratio between driving and driven shafts, and is suitable for applications requiring moderate torque transmission, such as compressors, fans, machine tools, printing presses, and textile machinery. Universal joints (also called U-joints, universal couplings, Cardan joints, Hooke’s joints, or Hardy-Spicer joints) are used to transmit motion and rotational power, or torque, between two shafts that are offset at an angle. Most universal joints consist of two yokes and a middle assembly; the hub end of each yoke attaches to a shaft while the yoke ears attach to and pivot around the middle assembly to accommodate shaft misalignment. The type of middle assembly determines its usage—pin and block joints are suitable for transmitting high torque, needle bearing joints are used to handle high rotational speeds, and ball and socket joints are used in applications requiring low backlash (play between moving parts). The body of the universal joint may include a single joint to accommodate only angular misalignments between shafts, or two joints to accommodate both angular and parallel misalignments. Available in a variety of materials and configurations, universal joints are used in applications including motor vehicles, conveyors, medical and optical devices, forestry and mining equipment, robotics and space exploration, and aeronautics, among others. Lovejoy manufactures flexible couplings, universal joints, variable speed drives, and other transmission and mechanical power products. The company, founded in 1900, is headquartered in Downers Grove, IL.
Product Features
- Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 1,750 RPM
- Compensates for angular misalignments and shaft separation
- Steel for strength and durability
- Bored hubs fit onto shafts without the need for machining
- Operating temperatures range from -30 to 212 degrees F
Related Products
4Pcs Angle Linkage Ball Joint Ki...
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M8 (RH)
$121.00 AUD
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M8 (RH) Item Descriptions:-[Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.-[Rotation Angle]: With spring steel clip,...
Heyiarbeit 8mm to 10mm Single St...
Heyiarbeit 8mm to 10mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs 8 x 10 1 Pcs
$79.00 AUD
Heyiarbeit 8mm to 10mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs Heyiarbeit Single universal joint couplingSpecification:Material: MetalScrew Diameter: M4Length: 35mm/1.38"Outer Diameter: 16mm/0.63"Bore Diameter: 8x10mm/0.31"x0.39"Color: Silver ToneDescription:1.Universal steering shaft U joint coupler is e...
Zouminyy Motor Shaft Coupling Un...
Zouminyy Motor Shaft Coupling Universal Joint Connector U Joint Coupler ID 12mm OD 24mm for Model
$129.00 AUD
Zouminyy Motor Shaft Coupling Universal Joint Connector U Joint Coupler ID 12mm OD 24mm for Model Specification: Material: Metal Weight: Approx.128G/ 4.5Oz Length: Approx.56Mm/2.2In Inside Diameter: 12Mm/0.47In&Nbsp;&Nbsp; Outside Diameter: 24Mm/0.94In Package List: 1 Universal Joint 2 Screw Note: Please Allow Slight Error Due To Manua...
Lovejoy Size D2 Universal Joint ...
Lovejoy Size D2 Universal Joint Repair Kit 1
$114.00 AUD
Lovejoy Size D2 Universal Joint Repair Kit This Lovejoy universal joints D Series repair kit includes one block, one main pin, two half pins, and two rivet pins replacement parts for D Type universal joints with a single pin and joint. Repair kits are available for D2 -D14 Lovejoy universal joints. Assembly instructions provided for repair proce...
Huco 103.06.1616.Z Size 06 Huco-...
Huco 103.06.1616.Z Size 06 Huco-Pol Single Universal Joint With Brass Yoke, Acetal, Inch, 0.125" Bore A, 0.125" Bore B, 0.24" OD, 1.07" Length
$112.00 AUD
Huco 103.06.1616.Z Size 06 Huco-Pol Single Universal Joint With Brass Yoke, Acetal, Inch, 0.125" Bore A, 0.125" Bore B, 0.24" OD, 1.07" Length This Huco Huco-Pol Acetal single universal joint has yokes, headed bore inserts, and cross pieces made of brass with a chromate and passivate finish for strength, durability, and resistance to corrosion. ...
J.W. Winco 5LXF1/B DIN71802 Ball...
J.W. Winco 5LXF1/B DIN71802 Ball Joint, 8 mm Diameter, M5 x 0.8 Tapped Left Hand Thread, M5 x 0.8 Threaded Shank, 10 mm Thread Length with Safety Catch
$74.00 AUD
J.W. Winco 5LXF1/B DIN71802 Ball Joint, 8 mm Diameter, M5 x 0.8 Tapped Left Hand Thread, M5 x 0.8 Threaded Shank, 10 mm Thread Length with Safety Catch DIN 71802 steel angled ball joints consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the safety catch versions is 15°, and for the versions without safety c...
4Pcs Angle Linkage Ball Joint Ki...
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M10 (LH)
$120.00 AUD
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements M10 (LH) Item Descriptions:-[Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.-[Rotation Angle]: With spring steel clip...
Heyiarbeit 5mm to 8mm Single Ste...
Heyiarbeit 5mm to 8mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs 5 x 8 1 Pcs
$78.00 AUD
Heyiarbeit 5mm to 8mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs Heyiarbeit Single universal joint couplingSpecification:Material: MetalScrew Diameter: M4Length: 35mm/1.38"Outer Diameter: 14mm/0.55"Bore Diameter: 5x8mm/0.20"x0.31"Color: Silver ToneDescription:1.Universal steering shaft U joint coupler is eas...
Autoly 4mm to 4mm Inner Bore...
Autoly 4mm to 4mm Inner Bore Diameter Rotatable Universal Joint Coupling Shaft Metal Flexible Shaft Coupler for RC Robot Boat Car Motor, with Screws(2 Pack)
$94.00 AUD
Autoly 4mm to 4mm Inner Bore Diameter Rotatable Universal Joint Coupling Shaft Metal Flexible Shaft Coupler for RC Robot Boat Car Motor, with Screws(2 Pack) Product Specifications: Color: Silver Material: Steel Inner Dia Size: 4mm / 5/32-inch Outer Diameter: 12mm / 0.47-inch Height: 52mm / 2.05-inch Package Content: 2 x Universal Joint Shaft Cou...
Bansbach Easylift 545 A5 M8 Fork...
Bansbach Easylift 545 A5 M8 Fork Head Endfitting, Steel, Right Hand Thread
$112.00 AUD
Bansbach Easylift 545 A5 M8 Fork Head Endfitting, Steel, Right Hand Thread a5 fork head with M8 threads, Length: 32mm, space between forks: 8mm, thickness: 16mm, through hole: 8mm, can be used with 8/19 and 10/22 gas springs Product Features Package Dimensions: 3 L x 1 H x 1 W (inches) Package Weight : 0.25 pounds ...
Heyiarbeit 3mm to 4mm Single Ste...
Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs 3 x 4 1 Pcs
$78.00 AUD
Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 1Pcs Heyiarbeit Single universal joint couplingSpecification:Material: MetalScrew Diameter: M3Length: 23mm/0.91"Outer Diameter: 9mm/0.35"Bore Diameter: 3x4mm/0.12"x0.16"Color: Silver ToneDescription:1.Universal steering shaft U joint coupler is easy...
J.W. Winco 6LXF2/A DIN71802 Ball...
J.W. Winco 6LXF2/A DIN71802 Ball Joint, 10 mm Diameter, M6 x 1.0 Tapped Left Hand Thread, M6 x 1.0 Threaded Shank, 12.5 mm Thread Length
$74.00 AUD
J.W. Winco 6LXF2/A DIN71802 Ball Joint, 10 mm Diameter, M6 x 1.0 Tapped Left Hand Thread, M6 x 1.0 Threaded Shank, 12.5 mm Thread Length DIN 71802 steel angled ball joints consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the safety catch versions is 15°, and for the versions without safety catch is 18°. Fo...
4Pcs Angle Linkage Ball Joint Ki...
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements -M8 (LH and RH))
$134.00 AUD
4Pcs Angle Linkage Ball Joint Kit, with Spring Clip Dust Seal CS DIN 71802 Gear Linkage Replacements -M8 (LH and RH)) Item Descriptions:-[Widely Use]: Fit for gas spring, horizontally hinged door, tatami bed, billboard, cupboard, canopy, etc. The accessories are used in automotive, industrial, DIY furniture, etc.-[Rotation Angle]: With spring st...