{"id":7086007124148,"title":"ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001","handle":"etepon-digital-oscilloscope-kit-with-bnc-clip-cable-probe-assembled-finished-machine-em001","description":"\u003ch3\u003eETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eoscilloscope 2.4” Advanced Features No need do assembly or\nsoldering work Extended both in width and height Easily measuring Sensitivity\nextended Hand-held Detailed instruction Easily capture instantaneous wave\nforms using the Auto\/Normal\/Single Trigger mode. Adapter Added Version Thanks\nfor some customers' advice, we have updated this oscilloscope and added a\nsuitable adapter for it. ETEPON EM001 Digital Oscilloscope Advanced Assembled\nFinished Machine ETEPON EM001 digital oscilloscope kit 2.4” TFT is an\nassembled finished machine which can be used directly. Unlike DIY oscilloscope\nkit, you don’t need to do assembly or soldering work before using, which will\navoid some problem caused on soldering or assembling process and save your\ntime. Detailed Operation instructions, troubleshooting guide and schematic are\nalso provided. Read more Pofessional Assembled Display and MCU are mounted on\nthe same board (mainboard) to avoid using inter-board pin-headers. Analog\nchannel is placed on a separated board which contains most user install parts,\nso the analog and digital circuits can be better separated. Sensitivity\nExtended The sensitivity of the EM001 has been extended both in width and\nheight, which is wider and wider than the others. It reaches 5mV \/ div - 20V \/\ndiv, while others is only 10mV \/ div - 5v \/ div. Hand-Held This updated\ndigital oscilloscope can be hand-held, while the others can only be used by\nplacing it on the desktop. Read more Measuring Easily Using the\nAuto\/Normal\/Single Trigger mode,it is easy to capture instantaneous waveform.\nRotary Encoder It has been added the rotary encoder, makes parameter\nadjustment quicker and easier. Hold Function You can freeze waveform display\nat any time.And with waveform storage function you will not lose the waveform\nafter power off. Read more ETEPON EM001 oscilloscope Number of Channel 1\nAnalog Bandwidth 0 - 200KHz Sensitivity 5mV\/Div - 20V\/Div Sensitivity error \u0026lt;\n5% Resolution 12-bit Input Impedance 1M ohm Maximum Input voltage 50Vpk\nCoupling DC, AC, GND Trigger Modes Auto, Normal, Single Trigger Types\nRising\/falling edge Trigger Position 1\/2 of buffer size fixed Display 2.4 inch\ncolor TFT LCD with 320 x 240 resolution Power Supply 9V DC (8 - 10V\nacceptable) Dimension 115mm X 75mm X 22mm Weight 100 gram Kindly Note 1. This\noscilloscope runs on 9V power adapter. The power supply voltage must not\nexceed 10V. Otherwise it is possible to burn out the machine. 9v dc power\nsupply should be center positive. 2. The kit contains a power adapter.If you\nhave 9V power adapter at home, you can choose the one without adapter. ◕‿◕ If\nyou have any question or meet any problem on using this oscilloscope, please\nfeel free to contact with us! Read more Answers for Frequently Asked Questions\nto help you: Q1, Display white screen? A1: Power supply voltage must be in the\nrange of 8 - 10V.； Confirm signal input within range of equipment parameters.\nQ2,trigger level not center trigger level? A2: Hold down [TRIGGER] button for\nabout 3 seconds. This will set the trigger level to the medium value of signal\namplitude. Q3: Why my voltage numbers are incorrect? A3: There are two\npossible causes for wrong voltage display. 1 ) The reference point has not\nbeen calibrated, and 2 ) the gain of analog channel is incorrect. For 1 ) you\njust need to perform VPos alignment as instructed in the manual (it is\nstrongly suggested to do factory default restore before VPos alignment to make\nsure all parameters are valid). For 2 ) please refer to the Troubleshooting\nsection below to find out possible causes in analog channel. Q4: Can I use DSO\nShell to measure high voltages like AC 220V ? A4: This oscilloscope was\ndesigned for low voltage measurement. The maximum input voltage was specified\nas 50Vpk (peak value). So it can not be used to directly measure any voltage\nhigher than 50V. Otherwise that could damage the device or even cause body\ninjury. But if attenuator is used it is possible to use oscilloscope to\nmeasure voltages higher than 50V. Using a standard probe at 10X setting, for\nexample, it can take voltage up to 400V. However users need to fully\nunderstand the potential risk before doing so and will do at his\/her own risk.\nstrongly discourages users to use it for measurements at voltages higher than\nspecified. Seller will assume no responsibility for any damages, losses, or\nbody injuries caused by using DSO Shell to measure voltages higher than\nspecification. Q5: Why does the encoder knob rotate trigger level up and down\nwithout change? A5: The encoder knob of the equipment needs to be fine-tuned\nin design, so it needs to be adjusted slowly to work. When the speed is too\nfast, the device will be considered invalid. For more question, welcome to ask\nanytime!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering\/assembly work needs It can be used directly to avoid assembling \/welding process problems and greatly save your time\u003c\/li\u003e\n \u003cli\u003eUPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV\/div - 20V\/div while the others is only 10mV\/div - 5v\/div\u003c\/li\u003e\n \u003cli\u003eHAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop\u003c\/li\u003e\n \u003cli\u003eROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier\u003c\/li\u003e\n \u003cli\u003eWHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T16:59:00+11:00","created_at":"2022-03-18T16:59:00+11:00","vendor":"ETEPON","type":"Oscilloscopes","tags":["auspowers_batchone"],"price":22100,"price_min":22100,"price_max":22100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333794472116,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B081Q2KDJT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001","public_title":null,"options":["Default Title"],"price":22100,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"6941344408197","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B081Q2KDJT.jpg?v=1648552809","\/\/auspowers.com\/cdn\/shop\/products\/61Fv1ZZNW_L.jpg?v=1647583141","\/\/auspowers.com\/cdn\/shop\/products\/71o-9tlMNiL.jpg?v=1647583141","\/\/auspowers.com\/cdn\/shop\/products\/71sDC1UQZ6L.jpg?v=1647583141","\/\/auspowers.com\/cdn\/shop\/products\/71RN6SwNOuL.jpg?v=1647583141","\/\/auspowers.com\/cdn\/shop\/products\/71ShESRhkYL.jpg?v=1647583141","\/\/auspowers.com\/cdn\/shop\/products\/61SR9IW7msL.jpg?v=1647583141","\/\/auspowers.com\/cdn\/shop\/products\/71lBc93fiWL.jpg?v=1647583141"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B081Q2KDJT.jpg?v=1648552809","options":["Title"],"media":[{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25345722187956,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B081Q2KDJT.jpg?v=1648552809"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B081Q2KDJT.jpg?v=1648552809","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326705332,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Fv1ZZNW_L.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Fv1ZZNW_L.jpg?v=1647583141","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326738100,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71o-9tlMNiL.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71o-9tlMNiL.jpg?v=1647583141","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326770868,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71sDC1UQZ6L.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71sDC1UQZ6L.jpg?v=1647583141","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326803636,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71RN6SwNOuL.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71RN6SwNOuL.jpg?v=1647583141","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326836404,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71ShESRhkYL.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71ShESRhkYL.jpg?v=1647583141","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326869172,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61SR9IW7msL.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61SR9IW7msL.jpg?v=1647583141","width":1500},{"alt":"[Australia - AusPower] - ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 ","id":25200326901940,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71lBc93fiWL.jpg?v=1647583141"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71lBc93fiWL.jpg?v=1647583141","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eoscilloscope 2.4” Advanced Features No need do assembly or\nsoldering work Extended both in width and height Easily measuring Sensitivity\nextended Hand-held Detailed instruction Easily capture instantaneous wave\nforms using the Auto\/Normal\/Single Trigger mode. Adapter Added Version Thanks\nfor some customers' advice, we have updated this oscilloscope and added a\nsuitable adapter for it. ETEPON EM001 Digital Oscilloscope Advanced Assembled\nFinished Machine ETEPON EM001 digital oscilloscope kit 2.4” TFT is an\nassembled finished machine which can be used directly. Unlike DIY oscilloscope\nkit, you don’t need to do assembly or soldering work before using, which will\navoid some problem caused on soldering or assembling process and save your\ntime. Detailed Operation instructions, troubleshooting guide and schematic are\nalso provided. Read more Pofessional Assembled Display and MCU are mounted on\nthe same board (mainboard) to avoid using inter-board pin-headers. Analog\nchannel is placed on a separated board which contains most user install parts,\nso the analog and digital circuits can be better separated. Sensitivity\nExtended The sensitivity of the EM001 has been extended both in width and\nheight, which is wider and wider than the others. It reaches 5mV \/ div - 20V \/\ndiv, while others is only 10mV \/ div - 5v \/ div. Hand-Held This updated\ndigital oscilloscope can be hand-held, while the others can only be used by\nplacing it on the desktop. Read more Measuring Easily Using the\nAuto\/Normal\/Single Trigger mode,it is easy to capture instantaneous waveform.\nRotary Encoder It has been added the rotary encoder, makes parameter\nadjustment quicker and easier. Hold Function You can freeze waveform display\nat any time.And with waveform storage function you will not lose the waveform\nafter power off. Read more ETEPON EM001 oscilloscope Number of Channel 1\nAnalog Bandwidth 0 - 200KHz Sensitivity 5mV\/Div - 20V\/Div Sensitivity error \u0026lt;\n5% Resolution 12-bit Input Impedance 1M ohm Maximum Input voltage 50Vpk\nCoupling DC, AC, GND Trigger Modes Auto, Normal, Single Trigger Types\nRising\/falling edge Trigger Position 1\/2 of buffer size fixed Display 2.4 inch\ncolor TFT LCD with 320 x 240 resolution Power Supply 9V DC (8 - 10V\nacceptable) Dimension 115mm X 75mm X 22mm Weight 100 gram Kindly Note 1. This\noscilloscope runs on 9V power adapter. The power supply voltage must not\nexceed 10V. Otherwise it is possible to burn out the machine. 9v dc power\nsupply should be center positive. 2. The kit contains a power adapter.If you\nhave 9V power adapter at home, you can choose the one without adapter. ◕‿◕ If\nyou have any question or meet any problem on using this oscilloscope, please\nfeel free to contact with us! Read more Answers for Frequently Asked Questions\nto help you: Q1, Display white screen? A1: Power supply voltage must be in the\nrange of 8 - 10V.； Confirm signal input within range of equipment parameters.\nQ2,trigger level not center trigger level? A2: Hold down [TRIGGER] button for\nabout 3 seconds. This will set the trigger level to the medium value of signal\namplitude. Q3: Why my voltage numbers are incorrect? A3: There are two\npossible causes for wrong voltage display. 1 ) The reference point has not\nbeen calibrated, and 2 ) the gain of analog channel is incorrect. For 1 ) you\njust need to perform VPos alignment as instructed in the manual (it is\nstrongly suggested to do factory default restore before VPos alignment to make\nsure all parameters are valid). For 2 ) please refer to the Troubleshooting\nsection below to find out possible causes in analog channel. Q4: Can I use DSO\nShell to measure high voltages like AC 220V ? A4: This oscilloscope was\ndesigned for low voltage measurement. The maximum input voltage was specified\nas 50Vpk (peak value). So it can not be used to directly measure any voltage\nhigher than 50V. Otherwise that could damage the device or even cause body\ninjury. But if attenuator is used it is possible to use oscilloscope to\nmeasure voltages higher than 50V. Using a standard probe at 10X setting, for\nexample, it can take voltage up to 400V. However users need to fully\nunderstand the potential risk before doing so and will do at his\/her own risk.\nstrongly discourages users to use it for measurements at voltages higher than\nspecified. Seller will assume no responsibility for any damages, losses, or\nbody injuries caused by using DSO Shell to measure voltages higher than\nspecification. Q5: Why does the encoder knob rotate trigger level up and down\nwithout change? A5: The encoder knob of the equipment needs to be fine-tuned\nin design, so it needs to be adjusted slowly to work. When the speed is too\nfast, the device will be considered invalid. For more question, welcome to ask\nanytime!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering\/assembly work needs It can be used directly to avoid assembling \/welding process problems and greatly save your time\u003c\/li\u003e\n \u003cli\u003eUPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV\/div - 20V\/div while the others is only 10mV\/div - 5v\/div\u003c\/li\u003e\n \u003cli\u003eHAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop\u003c\/li\u003e\n \u003cli\u003eROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier\u003c\/li\u003e\n \u003cli\u003eWHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}