{"id":7086403027124,"title":"Emerson-Fisher LP-Gas Equipment, 67CH-743, 1\/4\" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed","handle":"emerson-fisher-lp-gas-equipment-67ch-743-1-4-fnpt-connections-high-pressure-regulator-outlet-3-35-psi-handwheel-adjustment-vent-ul-listed","description":"\u003ch3\u003eEmerson-Fisher LP-Gas Equipment, 67CH-743, 1\/4\" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe 67C Series is a Underwriters Laboratories (UL) listed high-pressure\nregulators that meets a variety of applications in liquid and vapor service.\nThe compact body design makes the 67C Series particularly useful in\ninstallations with space limitations. The 67CH Series regulators come equipped\nwith a handwheel adjustment. This series contains brass materials that are not\ncompatible with anhydrous ammonia service. 67C Series regulators do not have\nan internal relief and should be installed with additional\/external\noverpressure protection. These units should not be installed in fixed piping\nserving 14 in. w.c. \/ 35 mbar appliance systems.!!! WARNING !!! Failure to\nfollow these instructions or to properly install and maintain this equipment\ncould result in an explosion and\/or fire causing property damage and personal\ninjury or death. Fisher equipment must be installed, operated and maintained\nin accordance with Federal, state and local codes and Fisher instructions. The\ninstallation in most States must also comply with NFPA no. 54 and 58\nstandards. Only Personnel trained in the proper procedures, codes, standards\nand regulations of the LP-gas industry should install and service this\nequipment. BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION,\nINSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE\nPURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL\nINSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS\nPRODUCT.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eBody Sizes and End Connection Styles (inlet x outlet): 1\/4 x 1\/4-inch FNPT\u003c\/li\u003e\n \u003cli\u003eMaximum Allowable Inlet Pressure : 250 psig \/ 17,2 bar\u003c\/li\u003e\n \u003cli\u003eOutlet Pressure Ranges : 3 - 35 psi \/ 0,2 - 2,4 bar\u003c\/li\u003e\n \u003cli\u003eCapacity : 750,000 BTU\/hr\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T23:25:16+11:00","created_at":"2022-03-18T23:25:16+11:00","vendor":"Emerson-Fisher LP-Gas Equipment","type":"Liquid Level Sensors","tags":["auspowers_batchone"],"price":22500,"price_min":22500,"price_max":22500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334919233716,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B06XGXFZHB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Emerson-Fisher LP-Gas Equipment, 67CH-743, 1\/4\" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed","public_title":null,"options":["Default Title"],"price":22500,"weight":612,"compare_at_price":null,"inventory_management":null,"barcode":"7036334592518","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B06XGXFZHB.jpg?v=1648568391"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B06XGXFZHB.jpg?v=1648568391","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Emerson-Fisher LP-Gas Equipment, 67CH-743, 1\/4\" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed ","id":25349176459444,"position":1,"preview_image":{"aspect_ratio":0.578,"height":500,"width":289,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B06XGXFZHB.jpg?v=1648568391"},"aspect_ratio":0.578,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B06XGXFZHB.jpg?v=1648568391","width":289}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eEmerson-Fisher LP-Gas Equipment, 67CH-743, 1\/4\" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe 67C Series is a Underwriters Laboratories (UL) listed high-pressure\nregulators that meets a variety of applications in liquid and vapor service.\nThe compact body design makes the 67C Series particularly useful in\ninstallations with space limitations. The 67CH Series regulators come equipped\nwith a handwheel adjustment. This series contains brass materials that are not\ncompatible with anhydrous ammonia service. 67C Series regulators do not have\nan internal relief and should be installed with additional\/external\noverpressure protection. These units should not be installed in fixed piping\nserving 14 in. w.c. \/ 35 mbar appliance systems.!!! WARNING !!! Failure to\nfollow these instructions or to properly install and maintain this equipment\ncould result in an explosion and\/or fire causing property damage and personal\ninjury or death. Fisher equipment must be installed, operated and maintained\nin accordance with Federal, state and local codes and Fisher instructions. The\ninstallation in most States must also comply with NFPA no. 54 and 58\nstandards. Only Personnel trained in the proper procedures, codes, standards\nand regulations of the LP-gas industry should install and service this\nequipment. BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION,\nINSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE\nPURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL\nINSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS\nPRODUCT.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eBody Sizes and End Connection Styles (inlet x outlet): 1\/4 x 1\/4-inch FNPT\u003c\/li\u003e\n \u003cli\u003eMaximum Allowable Inlet Pressure : 250 psig \/ 17,2 bar\u003c\/li\u003e\n \u003cli\u003eOutlet Pressure Ranges : 3 - 35 psi \/ 0,2 - 2,4 bar\u003c\/li\u003e\n \u003cli\u003eCapacity : 750,000 BTU\/hr\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7085392036020,"title":"CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay","handle":"crocsee-miniature-current-switch-cs-ts0-normally-open-amp-sensor-monitoring-relay-ac-1-50a-detectable-0-min-delay","description":"\u003ch3\u003eCrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eCrocSee AC Current Switch is designed for AC current monitoring, motor\noverload protection, automatic control system and other applications. This\ndevice senses a current draw of between 1amp and 50 amps and closes a set of\ncontacts while AC current is passing through sensor. Main Specifications:\nEnclosure Dimensions(LxWxH): 88 x 25 x 50mm; Or approx. 3.46 x 0.98 x 1.97\ninch Sensor Hole Diameter: 20mm (0.79 inch) Mounting Holes: 2x5mm holes spaced\n76mm on base (2 x 0.19”holes spaced 3”on base)Voltage Range: 120-240VACSwitch\nRating: 2.5 A @ 120 VAC\/240VAC (Only works with AC current, not for DC\ncurrent)Contact Type：Normally OpenOperating Temperature: -20 to 45℃（-4 to\n113℉）Humidity Limits: 0-95% RH, non-condensingResponse Time: ≤200ms Accuracy:\n1%Hysteresis: ≤1% NOTE: 1. Disconnect and lock-out all power sources prior to\ninstallation.2. The current switch has a rating of 2.5 Amps maximum. If the\nsecondary device (which is conncted with the switch) draws more than 2.5 Amps,\nthen you will need a separate high current relay. 3. A load must be applied\nacross the NO switch to work. If no load is applied across the NO switch,\nthese NO terminals will not close with correct operating primary current. 4.\nThe switching current is NOT calibratable. However, it is sensitive enough to\ndetect any current draw of between 1amp and 50 amps. Package includes: 1x AC\nCurrent Switch 1x Instruction Manual Warranty:1-year free replacement or full\nrefund without return.If the item you have received is defective in any way,\nplease message us for free replacement or refund without return.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eN.O. Universal Outputs: 2.5A @ 120 VAC\/240VAC; In 240V circuit, only one 120V hot line is connected.\u003c\/li\u003e\n \u003cli\u003eSelf-powered, no external power supply required\u003c\/li\u003e\n \u003cli\u003eAccurate \u0026amp; Dependable: Offers a sensing range of 1 to 50 amps and universal, solid-state outputs; Accuracy: 1%\u003c\/li\u003e\n \u003cli\u003eFaster Response Time: Once current flow is detected, it closes a set of contacts immidiately; Response Time: 200ms\u003c\/li\u003e\n \u003cli\u003eNOTE: If you want to test the operation of the sensor switch, a load must be applied across the NO contacts; otherwise, it will not work.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-17T22:52:41+11:00","created_at":"2022-03-17T22:52:41+11:00","vendor":"CrocSee","type":"Current Sensors","tags":["auspowers_batchone"],"price":11700,"price_min":11700,"price_max":11700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41332353728692,"title":"0-min Delay","option1":"0-min Delay","option2":null,"option3":null,"sku":"B086YT49H7","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay - 0-min Delay","public_title":"0-min Delay","options":["0-min Delay"],"price":11700,"weight":109,"compare_at_price":null,"inventory_management":null,"barcode":"4A420","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B086YT49H7.jpg?v=1648536802","\/\/auspowers.com\/cdn\/shop\/products\/71bNRsQPqfL.jpg?v=1647517961","\/\/auspowers.com\/cdn\/shop\/products\/71py5yguOrL.jpg?v=1647517961","\/\/auspowers.com\/cdn\/shop\/products\/81eO982NWoL.jpg?v=1647517961","\/\/auspowers.com\/cdn\/shop\/products\/71kz5zBEm3L.jpg?v=1647517961","\/\/auspowers.com\/cdn\/shop\/products\/81qElptRqGL.jpg?v=1647517961","\/\/auspowers.com\/cdn\/shop\/products\/71O8lB_KjJL.jpg?v=1647517961","\/\/auspowers.com\/cdn\/shop\/products\/51OXy_ZXtLL.jpg?v=1647517961"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B086YT49H7.jpg?v=1648536802","options":["Pattern Name"],"media":[{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25342949195956,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B086YT49H7.jpg?v=1648536802"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B086YT49H7.jpg?v=1648536802","width":2000},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195514036,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71bNRsQPqfL.jpg?v=1647517961"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71bNRsQPqfL.jpg?v=1647517961","width":1500},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195546804,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71py5yguOrL.jpg?v=1647517961"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71py5yguOrL.jpg?v=1647517961","width":2000},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195579572,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2138,"width":2138,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81eO982NWoL.jpg?v=1647517961"},"aspect_ratio":1.0,"height":2138,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81eO982NWoL.jpg?v=1647517961","width":2138},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195612340,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71kz5zBEm3L.jpg?v=1647517961"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71kz5zBEm3L.jpg?v=1647517961","width":2000},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195645108,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81qElptRqGL.jpg?v=1647517961"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81qElptRqGL.jpg?v=1647517961","width":2000},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195677876,"position":7,"preview_image":{"aspect_ratio":1.032,"height":1452,"width":1498,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71O8lB_KjJL.jpg?v=1647517961"},"aspect_ratio":1.032,"height":1452,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71O8lB_KjJL.jpg?v=1647517961","width":1498},{"alt":"[Australia - AusPower] - CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable 0-min Delay ","id":25189195710644,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51OXy_ZXtLL.jpg?v=1647517961"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51OXy_ZXtLL.jpg?v=1647517961","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eCrocSee AC Current Switch is designed for AC current monitoring, motor\noverload protection, automatic control system and other applications. This\ndevice senses a current draw of between 1amp and 50 amps and closes a set of\ncontacts while AC current is passing through sensor. Main Specifications:\nEnclosure Dimensions(LxWxH): 88 x 25 x 50mm; Or approx. 3.46 x 0.98 x 1.97\ninch Sensor Hole Diameter: 20mm (0.79 inch) Mounting Holes: 2x5mm holes spaced\n76mm on base (2 x 0.19”holes spaced 3”on base)Voltage Range: 120-240VACSwitch\nRating: 2.5 A @ 120 VAC\/240VAC (Only works with AC current, not for DC\ncurrent)Contact Type：Normally OpenOperating Temperature: -20 to 45℃（-4 to\n113℉）Humidity Limits: 0-95% RH, non-condensingResponse Time: ≤200ms Accuracy:\n1%Hysteresis: ≤1% NOTE: 1. Disconnect and lock-out all power sources prior to\ninstallation.2. The current switch has a rating of 2.5 Amps maximum. If the\nsecondary device (which is conncted with the switch) draws more than 2.5 Amps,\nthen you will need a separate high current relay. 3. A load must be applied\nacross the NO switch to work. If no load is applied across the NO switch,\nthese NO terminals will not close with correct operating primary current. 4.\nThe switching current is NOT calibratable. However, it is sensitive enough to\ndetect any current draw of between 1amp and 50 amps. Package includes: 1x AC\nCurrent Switch 1x Instruction Manual Warranty:1-year free replacement or full\nrefund without return.If the item you have received is defective in any way,\nplease message us for free replacement or refund without return.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eN.O. Universal Outputs: 2.5A @ 120 VAC\/240VAC; In 240V circuit, only one 120V hot line is connected.\u003c\/li\u003e\n \u003cli\u003eSelf-powered, no external power supply required\u003c\/li\u003e\n \u003cli\u003eAccurate \u0026amp; Dependable: Offers a sensing range of 1 to 50 amps and universal, solid-state outputs; Accuracy: 1%\u003c\/li\u003e\n \u003cli\u003eFaster Response Time: Once current flow is detected, it closes a set of contacts immidiately; Response Time: 200ms\u003c\/li\u003e\n \u003cli\u003eNOTE: If you want to test the operation of the sensor switch, a load must be applied across the NO contacts; otherwise, it will not work.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087180153012,"title":"CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing","handle":"chenbo-10kg-load-cell-weight-sensor-hx711-adc-converter-breakout-module-scale-load-cell-weight-weighing","description":"\u003ch3\u003eCHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeatures Two selectable differential input channels On-chip active low noise\nPGA with selectable gain of 3264 and 128 On-chip power supply regulator for\nload-cell and ADC analog power supply On-chip oscillator requiring no external\ncomponent with optional external crystal On-chip power-on-reset Simple digital\ncontrol and serial interface: pin-driven controlsno programming needed\nSelectable 10SPS or 80SPS output data rate Simultaneous 50 and 60Hz supply\nrejection Current consumption including on-chip analog power supply regulator:\nnormal operation \u0026lt; 1.5mApower down \u0026lt; 1uA Operation supply voltage range: 2.6 ~\n5.5V Operating Temperature Range:-20 degree ~ +85 degree Connection: Red to E+\nBlack to E- Green to A+ White to A- Note:Be sure not to directly press on the\nwhite cover to prevent damage to the sensor. Package Included: 1X Weight\nSensor 10KG 1 X HX711 24BIT Precision ADC Module\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kg .\u003c\/li\u003e\n \u003cli\u003eInput End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V DC\u003c\/li\u003e\n \u003cli\u003eOn-chip active low noise PGA with selectable gain of 32, 64 and 128\u003c\/li\u003e\n \u003cli\u003eSimple digital control and serial interface: pin-driven controls, no programming needed\u003c\/li\u003e\n \u003cli\u003eSelectable 10SPS or 80SPS output data rate\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T08:12:02+11:00","created_at":"2022-03-19T08:12:02+11:00","vendor":"CHENBO","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":7800,"price_min":7800,"price_max":7800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336473616564,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07Q5D9QB9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing","public_title":null,"options":["Default Title"],"price":7800,"weight":34,"compare_at_price":null,"inventory_management":null,"barcode":"HX-20769","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07Q5D9QB9.jpg?v=1648590193","\/\/auspowers.com\/cdn\/shop\/products\/31PW32Yi00L.jpg?v=1647637922","\/\/auspowers.com\/cdn\/shop\/products\/41KvOQI53KL.jpg?v=1647637923","\/\/auspowers.com\/cdn\/shop\/products\/51rIMqd2NFL.jpg?v=1647637923","\/\/auspowers.com\/cdn\/shop\/products\/61I18lgDQZL.jpg?v=1647637923","\/\/auspowers.com\/cdn\/shop\/products\/51xU-bI73IL_f17de1ba-0453-4b4c-9a83-1c9706e42be0.jpg?v=1647637923"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07Q5D9QB9.jpg?v=1648590193","options":["Title"],"media":[{"alt":"[Australia - AusPower] - CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing ","id":25352934916276,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07Q5D9QB9.jpg?v=1648590193"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07Q5D9QB9.jpg?v=1648590193","width":1001},{"alt":"[Australia - AusPower] - CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing ","id":25209373229236,"position":2,"preview_image":{"aspect_ratio":1.171,"height":427,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/31PW32Yi00L.jpg?v=1647637922"},"aspect_ratio":1.171,"height":427,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/31PW32Yi00L.jpg?v=1647637922","width":500},{"alt":"[Australia - AusPower] - CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing ","id":25209373262004,"position":3,"preview_image":{"aspect_ratio":1.042,"height":480,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41KvOQI53KL.jpg?v=1647637923"},"aspect_ratio":1.042,"height":480,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41KvOQI53KL.jpg?v=1647637923","width":500},{"alt":"[Australia - AusPower] - CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing ","id":25209373294772,"position":4,"preview_image":{"aspect_ratio":1.061,"height":1006,"width":1067,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51rIMqd2NFL.jpg?v=1647637923"},"aspect_ratio":1.061,"height":1006,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51rIMqd2NFL.jpg?v=1647637923","width":1067},{"alt":"[Australia - AusPower] - CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing ","id":25209373327540,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61I18lgDQZL.jpg?v=1647637923"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61I18lgDQZL.jpg?v=1647637923","width":1000},{"alt":"[Australia - AusPower] - CHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing ","id":25209373393076,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51xU-bI73IL_f17de1ba-0453-4b4c-9a83-1c9706e42be0.jpg?v=1647637923"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51xU-bI73IL_f17de1ba-0453-4b4c-9a83-1c9706e42be0.jpg?v=1647637923","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCHENBO 10kg Load Cell Weight Sensor + HX711 ADC Converter Breakout Module Scale Load Cell Weight Weighing\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeatures Two selectable differential input channels On-chip active low noise\nPGA with selectable gain of 3264 and 128 On-chip power supply regulator for\nload-cell and ADC analog power supply On-chip oscillator requiring no external\ncomponent with optional external crystal On-chip power-on-reset Simple digital\ncontrol and serial interface: pin-driven controlsno programming needed\nSelectable 10SPS or 80SPS output data rate Simultaneous 50 and 60Hz supply\nrejection Current consumption including on-chip analog power supply regulator:\nnormal operation \u0026lt; 1.5mApower down \u0026lt; 1uA Operation supply voltage range: 2.6 ~\n5.5V Operating Temperature Range:-20 degree ~ +85 degree Connection: Red to E+\nBlack to E- Green to A+ White to A- Note:Be sure not to directly press on the\nwhite cover to prevent damage to the sensor. Package Included: 1X Weight\nSensor 10KG 1 X HX711 24BIT Precision ADC Module\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kg .\u003c\/li\u003e\n \u003cli\u003eInput End: Red+, Black-; Output End: Green+, White-; Excitation Voltage: 5-10V DC\u003c\/li\u003e\n \u003cli\u003eOn-chip active low noise PGA with selectable gain of 32, 64 and 128\u003c\/li\u003e\n \u003cli\u003eSimple digital control and serial interface: pin-driven controls, no programming needed\u003c\/li\u003e\n \u003cli\u003eSelectable 10SPS or 80SPS output data rate\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087177466036,"title":"Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs","handle":"teyleten-robot-gy-521-mpu-6050-mpu6050-3-axis-accelerometer-gyroscope-sensor-module-6-axis-accelerometer-gyroscope-sensor-module-iic-i2c-3-5v-for-arduino-4pcs","description":"\u003ch3\u003eTeyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePower supply :3-5v (internal low dropout regulator)\u003c\/li\u003e\n \u003cli\u003eCommunication modes: standard IIC communications protocol\u003c\/li\u003e\n \u003cli\u003eChip built-in 16bit AD converter, 16-bit data output\u003c\/li\u003e\n \u003cli\u003eGyroscopes range: +\/- 2000 degree\/sec\u003c\/li\u003e\n \u003cli\u003eAcceleration range: 2 4 8 16g,Pin pitch 2.54mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T08:10:48+11:00","created_at":"2022-03-19T08:10:48+11:00","vendor":"Teyleten Robot","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336470372532,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B095SBYB95","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs","public_title":null,"options":["Default Title"],"price":8400,"weight":13,"compare_at_price":null,"inventory_management":null,"barcode":"MPU6050","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B095SBYB95.jpg?v=1648590162","\/\/auspowers.com\/cdn\/shop\/products\/616g-eQHLeL.jpg?v=1647637848","\/\/auspowers.com\/cdn\/shop\/products\/61v0chFV7RL.jpg?v=1647637848","\/\/auspowers.com\/cdn\/shop\/products\/51S-1dgYe4L.jpg?v=1647637848","\/\/auspowers.com\/cdn\/shop\/products\/7152sC01zkL_03079816-74c4-47f5-be30-d85f7416541d.jpg?v=1647637848"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B095SBYB95.jpg?v=1648590162","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs ","id":25352930853044,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B095SBYB95.jpg?v=1648590162"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B095SBYB95.jpg?v=1648590162","width":1000},{"alt":"[Australia - AusPower] - Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs ","id":25209359564980,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/616g-eQHLeL.jpg?v=1647637848"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/616g-eQHLeL.jpg?v=1647637848","width":1000},{"alt":"[Australia - AusPower] - Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs ","id":25209359597748,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61v0chFV7RL.jpg?v=1647637848"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61v0chFV7RL.jpg?v=1647637848","width":1000},{"alt":"[Australia - AusPower] - Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs ","id":25209359630516,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51S-1dgYe4L.jpg?v=1647637848"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51S-1dgYe4L.jpg?v=1647637848","width":1000},{"alt":"[Australia - AusPower] - Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs ","id":25209359663284,"position":5,"preview_image":{"aspect_ratio":1.707,"height":601,"width":1026,"src":"\/\/auspowers.com\/cdn\/shop\/products\/7152sC01zkL_03079816-74c4-47f5-be30-d85f7416541d.jpg?v=1647637848"},"aspect_ratio":1.707,"height":601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/7152sC01zkL_03079816-74c4-47f5-be30-d85f7416541d.jpg?v=1647637848","width":1026}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTeyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePower supply :3-5v (internal low dropout regulator)\u003c\/li\u003e\n \u003cli\u003eCommunication modes: standard IIC communications protocol\u003c\/li\u003e\n \u003cli\u003eChip built-in 16bit AD converter, 16-bit data output\u003c\/li\u003e\n \u003cli\u003eGyroscopes range: +\/- 2000 degree\/sec\u003c\/li\u003e\n \u003cli\u003eAcceleration range: 2 4 8 16g,Pin pitch 2.54mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087166718132,"title":"Cotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C","handle":"cotchear-gy-521-mpu-6050-mpu6050-3-axis-accelerometer-gyroscope-module-6-dof-6-axis-accelerometer-gyroscope-sensor-module-16-bit-ad-converter-data-output-iic-i2c","description":"\u003ch3\u003eCotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUse the chip: MPU-6050 Power supply :3-5v (internal low dropout regulator)\nCommunication modes: standard IIC communications protocol Chip built-in 16bit\nAD converter, 16-bit data output Gyroscope range: ± 2000 ° \/ s\nAcceleration range: ± 2 ± 4 ± 8 ± 16g Immersion Gold PCB machine welding\nprocess to ensure quality Pin pitch 2.54mm\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUse the chip: MPU-6050\u003c\/li\u003e\n \u003cli\u003ePower supply :3-5v (internal low dropout regulator)\u003c\/li\u003e\n \u003cli\u003eCommunication modes: standard IIC communications protocol\u003c\/li\u003e\n \u003cli\u003eChip built-in 16bit AD converter, 16-bit data output\u003c\/li\u003e\n \u003cli\u003eGyroscope range: 2000 \/ s\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T08:05:11+11:00","created_at":"2022-03-19T08:05:11+11:00","vendor":"Cotchear","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":7000,"price_min":7000,"price_max":7000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336456970420,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07DXQB6P1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C","public_title":null,"options":["Default Title"],"price":7000,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"GY-521","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07DXQB6P1.jpg?v=1648589992","\/\/auspowers.com\/cdn\/shop\/products\/41m-D1jBc2L.jpg?v=1647637511","\/\/auspowers.com\/cdn\/shop\/products\/41Drnt7MTzL.jpg?v=1647637511"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07DXQB6P1.jpg?v=1648589992","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Cotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C ","id":25352909160628,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1010,"width":1010,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07DXQB6P1.jpg?v=1648589992"},"aspect_ratio":1.0,"height":1010,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07DXQB6P1.jpg?v=1648589992","width":1010},{"alt":"[Australia - AusPower] - Cotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C ","id":25209308610740,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41m-D1jBc2L.jpg?v=1647637511"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41m-D1jBc2L.jpg?v=1647637511","width":500},{"alt":"[Australia - AusPower] - Cotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C ","id":25209308643508,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41Drnt7MTzL.jpg?v=1647637511"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41Drnt7MTzL.jpg?v=1647637511","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCotchear GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUse the chip: MPU-6050 Power supply :3-5v (internal low dropout regulator)\nCommunication modes: standard IIC communications protocol Chip built-in 16bit\nAD converter, 16-bit data output Gyroscope range: ± 2000 ° \/ s\nAcceleration range: ± 2 ± 4 ± 8 ± 16g Immersion Gold PCB machine welding\nprocess to ensure quality Pin pitch 2.54mm\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUse the chip: MPU-6050\u003c\/li\u003e\n \u003cli\u003ePower supply :3-5v (internal low dropout regulator)\u003c\/li\u003e\n \u003cli\u003eCommunication modes: standard IIC communications protocol\u003c\/li\u003e\n \u003cli\u003eChip built-in 16bit AD converter, 16-bit data output\u003c\/li\u003e\n \u003cli\u003eGyroscope range: 2000 \/ s\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087141159092,"title":"Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg)","handle":"portable-s-type-beam-high-precision-load-cell-scale-sensor-50-100-300-2000-kg-for-hopper-weight-high-pressure-tension-weighing2000kg","description":"\u003ch3\u003ePortable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis PSD load cell sensor is the combination of quality material, exquisite\nworkmanship and high precision. Can be widely in all kinds of weighing\nenvironment, such as measuring weight, compression force, tension, especially\nplays great importance in scaling of hopper etc. Specifications: Model: PSD-S1\nMaterial: metal Type: weighting Physical properties of materials: conductors\nProcess: film Output signal: analog Protection grade: IP67 Linearity:\n±0.02%F.S. Delaying: ±0.02%F.S. Repeatability: ±0.02%F.S. Sensitivity: 2.0mv\/v\nDrifting: ±0.02%F.S Input impedance: 350±10Ω Output impedance: 350±5Ω\nApplication: Mixing station, batching machine, asphalt station, etc. Measuring\nrange(Optional): 50kg, 100kg, 300kg, 2000kg Quantity: 1PC Weight: 502g(load\ncell 50kg), 551g(load cell 100kg), 575g(load cell 300kg), 712g(load cell\n2000kg) Wire connecting method: Input: Red wire(+), Black wire(-) Output:\nGreen wire(+), White wire(-) Yellow wire(GND) Package Included: 1 x Weighting\nSensor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T07:51:38+11:00","created_at":"2022-03-19T07:51:38+11:00","vendor":"Walfront","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":23100,"price_min":23100,"price_max":23100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336424595636,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B077YHFCX4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg)","public_title":null,"options":["Default Title"],"price":23100,"weight":680,"compare_at_price":null,"inventory_management":null,"barcode":"663862492606","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B077YHFCX4.jpg?v=1648589502","\/\/auspowers.com\/cdn\/shop\/products\/618vpDR6yTL.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/61d4y3rRmxL_139f678a-fe0b-4274-ad02-11c0a2726dce.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/51GnKAKc1hL.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/51FjyD-6kRL.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/610MsMaqIML.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/613PjJIePVL.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/61Iwgke0cWL.jpg?v=1647636698","\/\/auspowers.com\/cdn\/shop\/products\/517tW1p8gML.jpg?v=1647636698"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B077YHFCX4.jpg?v=1648589502","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25352845721780,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B077YHFCX4.jpg?v=1648589502"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B077YHFCX4.jpg?v=1648589502","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114198196,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/618vpDR6yTL.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/618vpDR6yTL.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114230964,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61d4y3rRmxL_139f678a-fe0b-4274-ad02-11c0a2726dce.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61d4y3rRmxL_139f678a-fe0b-4274-ad02-11c0a2726dce.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114263732,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51GnKAKc1hL.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51GnKAKc1hL.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114329268,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51FjyD-6kRL.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51FjyD-6kRL.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114394804,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/610MsMaqIML.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/610MsMaqIML.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114460340,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/613PjJIePVL.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/613PjJIePVL.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114525876,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Iwgke0cWL.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Iwgke0cWL.jpg?v=1647636698","width":1001},{"alt":"[Australia - AusPower] - Portable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg) ","id":25209114558644,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/517tW1p8gML.jpg?v=1647636698"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/517tW1p8gML.jpg?v=1647636698","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePortable S-type Beam High-Precision Load Cell Scale Sensor 50\/100\/ 300\/2000 KG for Hopper Weight High Pressure Tension Weighing(2000kg)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis PSD load cell sensor is the combination of quality material, exquisite\nworkmanship and high precision. Can be widely in all kinds of weighing\nenvironment, such as measuring weight, compression force, tension, especially\nplays great importance in scaling of hopper etc. Specifications: Model: PSD-S1\nMaterial: metal Type: weighting Physical properties of materials: conductors\nProcess: film Output signal: analog Protection grade: IP67 Linearity:\n±0.02%F.S. Delaying: ±0.02%F.S. Repeatability: ±0.02%F.S. Sensitivity: 2.0mv\/v\nDrifting: ±0.02%F.S Input impedance: 350±10Ω Output impedance: 350±5Ω\nApplication: Mixing station, batching machine, asphalt station, etc. Measuring\nrange(Optional): 50kg, 100kg, 300kg, 2000kg Quantity: 1PC Weight: 502g(load\ncell 50kg), 551g(load cell 100kg), 575g(load cell 300kg), 712g(load cell\n2000kg) Wire connecting method: Input: Red wire(+), Black wire(-) Output:\nGreen wire(+), White wire(-) Yellow wire(GND) Package Included: 1 x Weighting\nSensor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087111962804,"title":"10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer","handle":"10pcs-lead-free-temperature-sensor-line-0-to-600-for-hakko-191-212-soldering-iron-tip-thermometer","description":"\u003ch3\u003e10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis temperature sensor line is necessary standard accessory for HAKKO 191-212\nsoldering iron tip thermometer. Its measuring temperature ranges form 0℃ to\n600℃. Features: 1. Its measuring temperature ranges form 0℃ to 600℃. 2. Adopts\nhigh quality material with strong resistance to corrosion and oxidation. 3.\nWith simple structure and light weight, easy to replace. 4. Manufactured with\nlead free workmanship, safe and eco-friendly. 5. Applicable for HAKKO 191-212\nsoldering iron tip thermometer. Specification: Material: Metal + Plastic\nQuantity: 10Pcs Measuring Temperature Range: 0℃-600℃ Size: As pictures show\nWeight: Approx. 7g\/0.28oz Package List: 10 x Temperature Sensor Line\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIts measuring temperature ranges form 0C to 600C.\u003c\/li\u003e\n \u003cli\u003edopts high quality material with strong resistance to corrosion and oxidation.\u003c\/li\u003e\n \u003cli\u003eWith simple structure and light weight, easy to replace.\u003c\/li\u003e\n \u003cli\u003eManufactured with lead free workmanship, safe and eco-friendly.\u003c\/li\u003e\n \u003cli\u003eApplicable for HAKKO 191-212 soldering iron tip thermometer.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T07:38:31+11:00","created_at":"2022-03-19T07:38:31+11:00","vendor":"Thincol","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":7700,"price_min":7700,"price_max":7700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336397004980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07WRRNYB9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer","public_title":null,"options":["Default Title"],"price":7700,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"0789904259072","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07WRRNYB9.jpg?v=1648589019","\/\/auspowers.com\/cdn\/shop\/products\/41ThgqTK5iL.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/41FagybgVbL.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/41vTKnjFheL.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/41gp7yHl1wL.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/61B6Op9XGqL.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/618JU5iIPvL.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/41ztgPGFA2L.jpg?v=1647635912","\/\/auspowers.com\/cdn\/shop\/products\/41YZKGgIZ_L.jpg?v=1647635912"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRRNYB9.jpg?v=1648589019","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25352785428660,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRRNYB9.jpg?v=1648589019"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRRNYB9.jpg?v=1648589019","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926044340,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41ThgqTK5iL.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41ThgqTK5iL.jpg?v=1647635912","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926109876,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41FagybgVbL.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41FagybgVbL.jpg?v=1647635912","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926175412,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41vTKnjFheL.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41vTKnjFheL.jpg?v=1647635912","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926240948,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41gp7yHl1wL.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41gp7yHl1wL.jpg?v=1647635912","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926306484,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61B6Op9XGqL.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61B6Op9XGqL.jpg?v=1647635912","width":1000},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926372020,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/618JU5iIPvL.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/618JU5iIPvL.jpg?v=1647635912","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926404788,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41ztgPGFA2L.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41ztgPGFA2L.jpg?v=1647635912","width":1001},{"alt":"[Australia - AusPower] - 10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer ","id":25208926437556,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41YZKGgIZ_L.jpg?v=1647635912"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41YZKGgIZ_L.jpg?v=1647635912","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e10Pcs Lead-Free Temperature Sensor Line 0℃ to 600℃ for HAKKO 191-212 Soldering Iron Tip Thermometer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis temperature sensor line is necessary standard accessory for HAKKO 191-212\nsoldering iron tip thermometer. Its measuring temperature ranges form 0℃ to\n600℃. Features: 1. Its measuring temperature ranges form 0℃ to 600℃. 2. Adopts\nhigh quality material with strong resistance to corrosion and oxidation. 3.\nWith simple structure and light weight, easy to replace. 4. Manufactured with\nlead free workmanship, safe and eco-friendly. 5. Applicable for HAKKO 191-212\nsoldering iron tip thermometer. Specification: Material: Metal + Plastic\nQuantity: 10Pcs Measuring Temperature Range: 0℃-600℃ Size: As pictures show\nWeight: Approx. 7g\/0.28oz Package List: 10 x Temperature Sensor Line\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eIts measuring temperature ranges form 0C to 600C.\u003c\/li\u003e\n \u003cli\u003edopts high quality material with strong resistance to corrosion and oxidation.\u003c\/li\u003e\n \u003cli\u003eWith simple structure and light weight, easy to replace.\u003c\/li\u003e\n \u003cli\u003eManufactured with lead free workmanship, safe and eco-friendly.\u003c\/li\u003e\n \u003cli\u003eApplicable for HAKKO 191-212 soldering iron tip thermometer.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087062483124,"title":"Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board","handle":"aoicrie-2sets-28byj-48-dc-5v-stepper-motor-uln2003-driver-test-module-board","description":"\u003ch3\u003eAoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProduct description High step accuracy and resolution. low vibration and\nnoise. Stable and reliable performance, high efficiency Excellent quality and\nlong service life Widely used on fan, warm air blower, electric heaters, burn\noven, stage lighting equipment, microwave oven, lighting, Christmas gifts and\nother kinds of electrical appliances. Features: A, B, C, D four-phase LED\nindicates the status of the stepper motor work. Stepper motor with a standard\ninterface, when used directly pluggable. 5 line 4 phase can be used for\nordinary ULN2003 chip driver, connect to the 2 phase , support the development\nboard，With convenient use, direct docking. Rated Voltage: DC5V 4-phase\nInsulation Resistance: \u0026gt;10MΩ (500V) Dielectric Strength: 600V AC \/ 1mA \/ 1s\nStep angle: 5.625 x 1\/64 DC Resistance: 200Ω±7% (25C) Reduction ratio: 1\/64\nInsulation Grade: A No-load Pull in Frequency: \u0026gt;600Hz No-load Pull out\nFrequency: \u0026gt;1000Hz Pull in Torque: \u0026gt;34.3mN.m(120Hz) Detent Torque: \u0026gt;34.3mN.m\nTemperature Rise: 《40K(120Hz) Noise: \u0026lt;40dB (120Hz, No load, 10cm) Package\ninclude: 2 x Drive Module Board ULN2003 2 x 28BYJ-48 Stepper motor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eA, B, C, D four-phase LED indicates the status of the stepper motor work.\u003c\/li\u003e\n \u003cli\u003e5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking.\u003c\/li\u003e\n \u003cli\u003eVoltage: DC 5V; Phase: 4 phase 5 wire; Reduction Ratio: 1\/64, The stepper motor with a standard interface, can directly plug and easy to use.\u003c\/li\u003e\n \u003cli\u003eHigh step accuracy and resolution. low vibration and noise, Stable and reliable performance, high efficiency; Excellent quality and long service life.\u003c\/li\u003e\n \u003cli\u003eWidely used on fan, warm air blower, electric heaters, burn oven, stage lighting equipment, microwave oven, lighting, Christmas gifts and other kinds of electrical appliances.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T07:13:02+11:00","created_at":"2022-03-19T07:13:02+11:00","vendor":"Aoicrie","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336337629364,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07Z4BCY34","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board","public_title":null,"options":["Default Title"],"price":8800,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"0701715429383","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07Z4BCY34.jpg?v=1648588165","\/\/auspowers.com\/cdn\/shop\/products\/61n43kaR_qL.jpg?v=1647634382","\/\/auspowers.com\/cdn\/shop\/products\/61hi0RXihEL.jpg?v=1647634382","\/\/auspowers.com\/cdn\/shop\/products\/51WP7uTBJoL.jpg?v=1647634382","\/\/auspowers.com\/cdn\/shop\/products\/518ymg4rwoL.jpg?v=1647634382","\/\/auspowers.com\/cdn\/shop\/products\/61NS7qIqzuL.jpg?v=1647634382"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07Z4BCY34.jpg?v=1648588165","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board ","id":25352685191348,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07Z4BCY34.jpg?v=1648588165"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07Z4BCY34.jpg?v=1648588165","width":1200},{"alt":"[Australia - AusPower] - Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board ","id":25208723898548,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61n43kaR_qL.jpg?v=1647634382"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61n43kaR_qL.jpg?v=1647634382","width":1200},{"alt":"[Australia - AusPower] - Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board ","id":25208723931316,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61hi0RXihEL.jpg?v=1647634382"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61hi0RXihEL.jpg?v=1647634382","width":1200},{"alt":"[Australia - AusPower] - Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board ","id":25208723964084,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51WP7uTBJoL.jpg?v=1647634382"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51WP7uTBJoL.jpg?v=1647634382","width":1200},{"alt":"[Australia - AusPower] - Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board ","id":25208723996852,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/518ymg4rwoL.jpg?v=1647634382"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/518ymg4rwoL.jpg?v=1647634382","width":1200},{"alt":"[Australia - AusPower] - Aoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board ","id":25208724029620,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61NS7qIqzuL.jpg?v=1647634382"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61NS7qIqzuL.jpg?v=1647634382","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAoicrie 2Sets 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProduct description High step accuracy and resolution. low vibration and\nnoise. Stable and reliable performance, high efficiency Excellent quality and\nlong service life Widely used on fan, warm air blower, electric heaters, burn\noven, stage lighting equipment, microwave oven, lighting, Christmas gifts and\nother kinds of electrical appliances. Features: A, B, C, D four-phase LED\nindicates the status of the stepper motor work. Stepper motor with a standard\ninterface, when used directly pluggable. 5 line 4 phase can be used for\nordinary ULN2003 chip driver, connect to the 2 phase , support the development\nboard，With convenient use, direct docking. Rated Voltage: DC5V 4-phase\nInsulation Resistance: \u0026gt;10MΩ (500V) Dielectric Strength: 600V AC \/ 1mA \/ 1s\nStep angle: 5.625 x 1\/64 DC Resistance: 200Ω±7% (25C) Reduction ratio: 1\/64\nInsulation Grade: A No-load Pull in Frequency: \u0026gt;600Hz No-load Pull out\nFrequency: \u0026gt;1000Hz Pull in Torque: \u0026gt;34.3mN.m(120Hz) Detent Torque: \u0026gt;34.3mN.m\nTemperature Rise: 《40K(120Hz) Noise: \u0026lt;40dB (120Hz, No load, 10cm) Package\ninclude: 2 x Drive Module Board ULN2003 2 x 28BYJ-48 Stepper motor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eA, B, C, D four-phase LED indicates the status of the stepper motor work.\u003c\/li\u003e\n \u003cli\u003e5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking.\u003c\/li\u003e\n \u003cli\u003eVoltage: DC 5V; Phase: 4 phase 5 wire; Reduction Ratio: 1\/64, The stepper motor with a standard interface, can directly plug and easy to use.\u003c\/li\u003e\n \u003cli\u003eHigh step accuracy and resolution. low vibration and noise, Stable and reliable performance, high efficiency; Excellent quality and long service life.\u003c\/li\u003e\n \u003cli\u003eWidely used on fan, warm air blower, electric heaters, burn oven, stage lighting equipment, microwave oven, lighting, Christmas gifts and other kinds of electrical appliances.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087039185076,"title":"SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection","handle":"sparkfun-triple-axis-accelerometer-breakout-kx132-qwiic-digital-low-power-16-bit-resolution-three-axis-accelerometer-freefall-directional-tap-double-tap-tilt-orientation-detection","description":"\u003ch3\u003eSparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the\nKX132 digital accelerometer from Kionix. KX132 is a low-power, 16-bit\nresolution three-axis accelerometer w\/ 4 user-selectable acceleration\nmeasurement ranges of ±2g\/4g\/8g\/16g \u0026amp; has up to a 10kHz(max) output data rate\nmaking it ideal for a wide range of acceleration measurements as well as high-\nspeed applications such as vibration \u0026amp; tap sensing.Includes host of features\nFreefall detection, Directional Tap \u0026amp; Double-Tap detection, tilt orientation\ndetection \u0026amp; more. Qwiic KX132 can interface w\/ controllers using both I2C \u0026amp;\nSPI at high speeds so you can use it in an existing Qwiic\/I2C chain or on a\nSPI bus.SparkFun Qwiic Connect System is an ecosystem of I2C sensors,\nactuators, shields \u0026amp; cables that make prototyping faster \u0026amp; less prone to\nerror. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector.\nThis reduces the amount of required PCB space, \u0026amp; polarized connections mean\nyou can’t hook it up wrong.Measurement Range:±2g, ±4g, ±8g, ±16g(User\nSelectable)High Resolution (8 or 16-bit)User-Configurable Output Data Rate\n(ODR) up to 25600HzUser-Configurable 3-stage Advanced Data Path featuring low-\npass filter, low-pass\/high-pass filter \u0026amp; RMS calculation engineWide range of\nbuilt-in sensing functions:Free Fall, Directional-Tap\/Double-Tap, Device\nOrientation \u0026amp; Activity AlgorithmsLow Noise: 130µg\/√Hz (varies based on ODR,\npower mode \u0026amp; other settings)High Resolution Wake-Up \u0026amp; Back-to-Sleep Detection\nw\/ configurable threshold as low as 3.9mg512-byte FIFO buffer that continues\nrecording data while being readSelectable Low-Power or High-Performance\noperating modesLow Power w\/ Integrated Voltage RegulatorHigh Performance\nOperating Current Consumption (400Hz ODR + Wake-Up Detection):148µA: Low Power\nOperating Current Consumption(0.781Hz ODR + Wake-Up Detection):0.53µA, Standby\nCurrent Consumption:0.5µA\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. KX132 is a low-power, 16-bit resolution three-axis accelerometer w\/ four user-selectable acceleration measurement ranges of 2g\/4g\/8g\/16g \u0026amp; has up to a 10kHz (max) output data rate making it ideal for a wide range of acceleration measurements as well as high-speed applications such as vibration \u0026amp; tap sensing.\u003c\/li\u003e\n \u003cli\u003eFeatures: Measurement Range: 2g, 4g, 8g, 16g (User Selectable); High Resolution (8 or 16-bit); User-Configurable Output Data Rate (ODR) up to 25600Hz; User-Configurable 3-stage Advanced Data Path featuring low-pass filter, low-pass\/high-pass filter and RMS calculation engine\u003c\/li\u003e\n \u003cli\u003eWide range of built-in sensing functions: Free Fall, Directional-Tap \/ Double-Tap, Device Orientation \u0026amp; Activity Algorithms; Low Noise: 130g\/Hz (varies based on ODR, power mode \u0026amp; other settings); High Resolution Wake-Up \u0026amp; Back-to-Sleep Detection with configurable threshold as low as 3.9mg\u003c\/li\u003e\n \u003cli\u003e512-byte FIFO buffer that continues recording data while being read; Selectable Low-Power or High-Performance operating modes; Low Power with Integrated Voltage Regulator: High Performance Operating Current Consumption (400Hz ODR + Wake-Up Detection): 148A, Low Power Operating Current Consumption (0.781Hz ODR + Wake-Up Detection): 0.53A, Standby Current Consumption: 0.5A\u003c\/li\u003e\n \u003cli\u003eSelf-Test Functionality; Digital I2C up to 3.4MHz and Digital SPI up to 10MHz; 2x Qwiic Connectors; SPI available on PTH Header Pins; I2C Address: 0x1E (0x1F alternate)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T07:04:46+11:00","created_at":"2022-03-19T07:04:46+11:00","vendor":"SparkFun","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":10700,"price_min":10700,"price_max":10700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336302403764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B096YCN71G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection","public_title":null,"options":["Default Title"],"price":10700,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"SEN-17871","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B096YCN71G.jpg?v=1648587849","\/\/auspowers.com\/cdn\/shop\/products\/61cxthPre2L.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/61gjwYLnnXL.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/410U3yWTZ2L.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/510t4_kqOrL.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/61cgd7beBxL.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/61NkHTr7kvL.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/61d5pu6Ma2L.jpg?v=1647633886","\/\/auspowers.com\/cdn\/shop\/products\/61ahzpJsJ8L.jpg?v=1647633886"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B096YCN71G.jpg?v=1648587849","options":["Title"],"media":[{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25352655208628,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B096YCN71G.jpg?v=1648587849"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B096YCN71G.jpg?v=1648587849","width":1500},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653086900,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61cxthPre2L.jpg?v=1647633886"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61cxthPre2L.jpg?v=1647633886","width":1500},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653119668,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61gjwYLnnXL.jpg?v=1647633886"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61gjwYLnnXL.jpg?v=1647633886","width":1500},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653152436,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/410U3yWTZ2L.jpg?v=1647633886"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/410U3yWTZ2L.jpg?v=1647633886","width":500},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653185204,"position":5,"preview_image":{"aspect_ratio":2.373,"height":542,"width":1286,"src":"\/\/auspowers.com\/cdn\/shop\/products\/510t4_kqOrL.jpg?v=1647633886"},"aspect_ratio":2.373,"height":542,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/510t4_kqOrL.jpg?v=1647633886","width":1286},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653217972,"position":6,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61cgd7beBxL.jpg?v=1647633886"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61cgd7beBxL.jpg?v=1647633886","width":1000},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653250740,"position":7,"preview_image":{"aspect_ratio":1.499,"height":667,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61NkHTr7kvL.jpg?v=1647633886"},"aspect_ratio":1.499,"height":667,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61NkHTr7kvL.jpg?v=1647633886","width":1000},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653283508,"position":8,"preview_image":{"aspect_ratio":0.99,"height":2080,"width":2060,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61d5pu6Ma2L.jpg?v=1647633886"},"aspect_ratio":0.99,"height":2080,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61d5pu6Ma2L.jpg?v=1647633886","width":2060},{"alt":"[Australia - AusPower] - SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection ","id":25208653316276,"position":9,"preview_image":{"aspect_ratio":0.99,"height":2080,"width":2060,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61ahzpJsJ8L.jpg?v=1647633886"},"aspect_ratio":0.99,"height":2080,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61ahzpJsJ8L.jpg?v=1647633886","width":2060}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)-Digital Low-power-16-bit Resolution Three-axis Accelerometer-Freefall-Directional Tap-Double-Tap-Tilt Orientation Detection\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the\nKX132 digital accelerometer from Kionix. KX132 is a low-power, 16-bit\nresolution three-axis accelerometer w\/ 4 user-selectable acceleration\nmeasurement ranges of ±2g\/4g\/8g\/16g \u0026amp; has up to a 10kHz(max) output data rate\nmaking it ideal for a wide range of acceleration measurements as well as high-\nspeed applications such as vibration \u0026amp; tap sensing.Includes host of features\nFreefall detection, Directional Tap \u0026amp; Double-Tap detection, tilt orientation\ndetection \u0026amp; more. Qwiic KX132 can interface w\/ controllers using both I2C \u0026amp;\nSPI at high speeds so you can use it in an existing Qwiic\/I2C chain or on a\nSPI bus.SparkFun Qwiic Connect System is an ecosystem of I2C sensors,\nactuators, shields \u0026amp; cables that make prototyping faster \u0026amp; less prone to\nerror. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector.\nThis reduces the amount of required PCB space, \u0026amp; polarized connections mean\nyou can’t hook it up wrong.Measurement Range:±2g, ±4g, ±8g, ±16g(User\nSelectable)High Resolution (8 or 16-bit)User-Configurable Output Data Rate\n(ODR) up to 25600HzUser-Configurable 3-stage Advanced Data Path featuring low-\npass filter, low-pass\/high-pass filter \u0026amp; RMS calculation engineWide range of\nbuilt-in sensing functions:Free Fall, Directional-Tap\/Double-Tap, Device\nOrientation \u0026amp; Activity AlgorithmsLow Noise: 130µg\/√Hz (varies based on ODR,\npower mode \u0026amp; other settings)High Resolution Wake-Up \u0026amp; Back-to-Sleep Detection\nw\/ configurable threshold as low as 3.9mg512-byte FIFO buffer that continues\nrecording data while being readSelectable Low-Power or High-Performance\noperating modesLow Power w\/ Integrated Voltage RegulatorHigh Performance\nOperating Current Consumption (400Hz ODR + Wake-Up Detection):148µA: Low Power\nOperating Current Consumption(0.781Hz ODR + Wake-Up Detection):0.53µA, Standby\nCurrent Consumption:0.5µA\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. KX132 is a low-power, 16-bit resolution three-axis accelerometer w\/ four user-selectable acceleration measurement ranges of 2g\/4g\/8g\/16g \u0026amp; has up to a 10kHz (max) output data rate making it ideal for a wide range of acceleration measurements as well as high-speed applications such as vibration \u0026amp; tap sensing.\u003c\/li\u003e\n \u003cli\u003eFeatures: Measurement Range: 2g, 4g, 8g, 16g (User Selectable); High Resolution (8 or 16-bit); User-Configurable Output Data Rate (ODR) up to 25600Hz; User-Configurable 3-stage Advanced Data Path featuring low-pass filter, low-pass\/high-pass filter and RMS calculation engine\u003c\/li\u003e\n \u003cli\u003eWide range of built-in sensing functions: Free Fall, Directional-Tap \/ Double-Tap, Device Orientation \u0026amp; Activity Algorithms; Low Noise: 130g\/Hz (varies based on ODR, power mode \u0026amp; other settings); High Resolution Wake-Up \u0026amp; Back-to-Sleep Detection with configurable threshold as low as 3.9mg\u003c\/li\u003e\n \u003cli\u003e512-byte FIFO buffer that continues recording data while being read; Selectable Low-Power or High-Performance operating modes; Low Power with Integrated Voltage Regulator: High Performance Operating Current Consumption (400Hz ODR + Wake-Up Detection): 148A, Low Power Operating Current Consumption (0.781Hz ODR + Wake-Up Detection): 0.53A, Standby Current Consumption: 0.5A\u003c\/li\u003e\n \u003cli\u003eSelf-Test Functionality; Digital I2C up to 3.4MHz and Digital SPI up to 10MHz; 2x Qwiic Connectors; SPI available on PTH Header Pins; I2C Address: 0x1E (0x1F alternate)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7087029649588,"title":"ACDelco GM Original Equipment 23483152 Rear Wheel Speed Sensor","handle":"acdelco-gm-original-equipment-23483152-rear-wheel-speed-sensor","description":"\u003ch3\u003eACDelco GM Original Equipment 23483152 Rear Wheel Speed Sensor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each\nwheel, monitoring the rotation of each wheel, and are GM-recommended\nreplacements for your vehicle's original components. The sensor provides this\nspeed information to the antilock brake control module for the antilock\nbraking function. These sensors have been manufactured to fit your GM vehicle,\nproviding the same performance, durability, and service life you expect from\nGeneral Motors.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRestores ABS function and performance caused by failed wheel speed sensor\u003c\/li\u003e\n \u003cli\u003eGM-recommended replacement part for your GM vehicles original factory component\u003c\/li\u003e\n \u003cli\u003eOffering the quality, reliability, and durability of GM OE\u003c\/li\u003e\n \u003cli\u003eManufactured with GM Original Equipment specification for fit, form, and function\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T06:59:42+11:00","created_at":"2022-03-19T06:59:42+11:00","vendor":"ACDelco","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":15000,"price_min":15000,"price_max":15000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336288116916,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01E6GRCPY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ACDelco GM Original Equipment 23483152 Rear Wheel Speed Sensor","public_title":null,"options":["Default Title"],"price":15000,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"23483152","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B01E6GRCPY.jpg?v=1648587646","\/\/auspowers.com\/cdn\/shop\/products\/61uu5QPue3L.jpg?v=1647633582"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B01E6GRCPY.jpg?v=1648587646","options":["Title"],"media":[{"alt":"[Australia - AusPower] - ACDelco GM Original Equipment 23483152 Rear Wheel Speed Sensor ","id":25352632303796,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B01E6GRCPY.jpg?v=1648587646"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B01E6GRCPY.jpg?v=1648587646","width":1500},{"alt":"[Australia - AusPower] - ACDelco GM Original Equipment 23483152 Rear Wheel Speed Sensor ","id":25208612389044,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61uu5QPue3L.jpg?v=1647633582"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61uu5QPue3L.jpg?v=1647633582","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eACDelco GM Original Equipment 23483152 Rear Wheel Speed Sensor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each\nwheel, monitoring the rotation of each wheel, and are GM-recommended\nreplacements for your vehicle's original components. The sensor provides this\nspeed information to the antilock brake control module for the antilock\nbraking function. These sensors have been manufactured to fit your GM vehicle,\nproviding the same performance, durability, and service life you expect from\nGeneral Motors.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRestores ABS function and performance caused by failed wheel speed sensor\u003c\/li\u003e\n \u003cli\u003eGM-recommended replacement part for your GM vehicles original factory component\u003c\/li\u003e\n \u003cli\u003eOffering the quality, reliability, and durability of GM OE\u003c\/li\u003e\n \u003cli\u003eManufactured with GM Original Equipment specification for fit, form, and function\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086988165300,"title":"Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050","handle":"diymore-6dof-mpu-6050-gy-521-mpu6050-3-axis-gyroscope-accelerometer-module-mpu-6050","description":"\u003ch3\u003eDiymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Features: The fusion calculation data of the\nrotation matrix of 6 axis or 9 axis is output with a digital output 6 axis or\n9 axis, Euler Angle Forma.Remove the accelerator and gyroscope shaft\nsensitivity, reduce the impact of the set given and the drift of the\nsensor.Digital Motion Processing (DMP: Digital Motion Processing) engine can\nreduce complex fusion calculation data, sensor synchronization, posture\nsensing, etc.Sports Database Support Android, Linux and WindowsBuilt-in\noperation time deviation and magnetic sensor correction calculation\ntechnology, eliminating the need for the customer to perform correction\nneeds.Temperature sensor output in digitalSynchronous pin (SYNC PIN) support\nvideo electronics phase stability technology and GPSInterruptical interruptive\nposture recognition, panning, screen zoom, rolling, fast drop interruption,\nHIGH-G interruption, zero motion sensing, strike induction, shaking induction\nfunction. Up to 400kHz fast mode I2C, or up to 20MHz SPI serial host interface\n(Serial Host Interface)The internal frequency generator varies only the\nfrequency of ± 1% in all temperature ranges (Full Temperature Range).10,000 g\ncrashes toleranceMinimum thinner packaging for portable products, 4X4X0.9MM\nQFN)Compliance with ROHS and environmental standards Specifications: The VDD\npower supply voltage is 2.5V ± 5%, 3.0V ± 5%, 3.3V ± 5%; VDDIO is 1.8V ± 5%\nGyro operation current: 5mA, Gyroscope standby current: 5A; Accelerator\noperation current: 350A, Accelerator power saving mode current: 20A @ 10Hz\nSize:about 21151.2 mm(max) Net weight: about 3g Color:Blue Read more Read\nmore Application Scenarios Augmented Reality Pedestrian navigator Wheel force\nsensor Read more Package Included: 1X MPU-6050 3 Axis Accelerometer Sensor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUse chip: MPU-6050.\u003c\/li\u003e\n \u003cli\u003eSize: 21*15*1.2 mm(max).\u003c\/li\u003e\n \u003cli\u003eAcceleration range: 2 4 8 16g.\u003c\/li\u003e\n \u003cli\u003eThe gyroscope range: + 2000 \/s.\u003c\/li\u003e\n \u003cli\u003eCommunication: standard IIC communication agreement.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T06:37:51+11:00","created_at":"2022-03-19T06:37:51+11:00","vendor":"diymore","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":7800,"price_min":7800,"price_max":7800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336221335732,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01J167T84","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050","public_title":null,"options":["Default Title"],"price":7800,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"611029136436","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B01J167T84.jpg?v=1648586651","\/\/auspowers.com\/cdn\/shop\/products\/61UJkIzunDL.jpg?v=1647632271","\/\/auspowers.com\/cdn\/shop\/products\/61dNJGGBWmL.jpg?v=1647632271","\/\/auspowers.com\/cdn\/shop\/products\/61qG1jRmycL_99cbb08f-40ba-47e5-bb0b-3402749f921d.jpg?v=1647632271","\/\/auspowers.com\/cdn\/shop\/products\/61E1CBfwHTL.jpg?v=1647632271","\/\/auspowers.com\/cdn\/shop\/products\/518ezTG0jDL_4f695b93-71d7-4383-bb3f-c68ff1f06587.jpg?v=1647632272","\/\/auspowers.com\/cdn\/shop\/products\/61SeKRHvnLL_22cbb2af-e64a-41da-8bf2-2aecc5eec919.jpg?v=1647632272","\/\/auspowers.com\/cdn\/shop\/products\/61i3zCKCXwL_355f3de1-73cb-45b5-acf9-bf588d0d0e6e.jpg?v=1647632272","\/\/auspowers.com\/cdn\/shop\/products\/51XMhA_tIgL.jpg?v=1647632272"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B01J167T84.jpg?v=1648586651","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25352421769396,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B01J167T84.jpg?v=1648586651"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B01J167T84.jpg?v=1648586651","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385732788,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UJkIzunDL.jpg?v=1647632271"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UJkIzunDL.jpg?v=1647632271","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385765556,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61dNJGGBWmL.jpg?v=1647632271"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61dNJGGBWmL.jpg?v=1647632271","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385798324,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61qG1jRmycL_99cbb08f-40ba-47e5-bb0b-3402749f921d.jpg?v=1647632271"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61qG1jRmycL_99cbb08f-40ba-47e5-bb0b-3402749f921d.jpg?v=1647632271","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385831092,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61E1CBfwHTL.jpg?v=1647632271"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61E1CBfwHTL.jpg?v=1647632271","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385863860,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/518ezTG0jDL_4f695b93-71d7-4383-bb3f-c68ff1f06587.jpg?v=1647632272"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/518ezTG0jDL_4f695b93-71d7-4383-bb3f-c68ff1f06587.jpg?v=1647632272","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385896628,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61SeKRHvnLL_22cbb2af-e64a-41da-8bf2-2aecc5eec919.jpg?v=1647632272"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61SeKRHvnLL_22cbb2af-e64a-41da-8bf2-2aecc5eec919.jpg?v=1647632272","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385929396,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61i3zCKCXwL_355f3de1-73cb-45b5-acf9-bf588d0d0e6e.jpg?v=1647632272"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61i3zCKCXwL_355f3de1-73cb-45b5-acf9-bf588d0d0e6e.jpg?v=1647632272","width":1000},{"alt":"[Australia - AusPower] - Diymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050 ","id":25208385962164,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51XMhA_tIgL.jpg?v=1647632272"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51XMhA_tIgL.jpg?v=1647632272","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDiymore 6DOF MPU-6050 GY-521 MPU6050 3 Axis Gyroscope + Accelerometer Module MPU 6050\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Features: The fusion calculation data of the\nrotation matrix of 6 axis or 9 axis is output with a digital output 6 axis or\n9 axis, Euler Angle Forma.Remove the accelerator and gyroscope shaft\nsensitivity, reduce the impact of the set given and the drift of the\nsensor.Digital Motion Processing (DMP: Digital Motion Processing) engine can\nreduce complex fusion calculation data, sensor synchronization, posture\nsensing, etc.Sports Database Support Android, Linux and WindowsBuilt-in\noperation time deviation and magnetic sensor correction calculation\ntechnology, eliminating the need for the customer to perform correction\nneeds.Temperature sensor output in digitalSynchronous pin (SYNC PIN) support\nvideo electronics phase stability technology and GPSInterruptical interruptive\nposture recognition, panning, screen zoom, rolling, fast drop interruption,\nHIGH-G interruption, zero motion sensing, strike induction, shaking induction\nfunction. Up to 400kHz fast mode I2C, or up to 20MHz SPI serial host interface\n(Serial Host Interface)The internal frequency generator varies only the\nfrequency of ± 1% in all temperature ranges (Full Temperature Range).10,000 g\ncrashes toleranceMinimum thinner packaging for portable products, 4X4X0.9MM\nQFN)Compliance with ROHS and environmental standards Specifications: The VDD\npower supply voltage is 2.5V ± 5%, 3.0V ± 5%, 3.3V ± 5%; VDDIO is 1.8V ± 5%\nGyro operation current: 5mA, Gyroscope standby current: 5A; Accelerator\noperation current: 350A, Accelerator power saving mode current: 20A @ 10Hz\nSize:about 21151.2 mm(max) Net weight: about 3g Color:Blue Read more Read\nmore Application Scenarios Augmented Reality Pedestrian navigator Wheel force\nsensor Read more Package Included: 1X MPU-6050 3 Axis Accelerometer Sensor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUse chip: MPU-6050.\u003c\/li\u003e\n \u003cli\u003eSize: 21*15*1.2 mm(max).\u003c\/li\u003e\n \u003cli\u003eAcceleration range: 2 4 8 16g.\u003c\/li\u003e\n \u003cli\u003eThe gyroscope range: + 2000 \/s.\u003c\/li\u003e\n \u003cli\u003eCommunication: standard IIC communication agreement.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086979842228,"title":"【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi","handle":"wt61-accelerometer-tilt-sensor-high-stability-acceleration-16g-gyro-anglexy-dual-axis-with-kalman-filter-mpu6050-ahrs-imu-unaffected-by-magnetic-field-for-pc-arduino-raspberry-pi","description":"\u003ch3\u003e【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHighlights WT61’s scientific name is the AHRS IMU sensor.\nA sensor measures 3-axis angle, angular velocity, acceleration. Its strength\nlies in the algorithm which can calculate the X and Y axis angle accurately.\nRobust MEMS design and small in sizeGround breaking bias stability, low noise\nlevel Persued for best data accuracy and stability: WTMOTION patented zero-\nbias automatic detection calibration algorithm and R\u0026amp;D dynamic fusion\nalgorithm outperforms traditional accelerometer sensor Technical\nSpecifications: Current: \u0026lt;10mAVoltage: 3.3-5V (requiring a power source of\n3.3-5V)Data output frequency：20Hz \/ 100HzBaud Rate: 9200 \/ 115200 Output\nContent: 3-axis Acceleration+Angle+Angular VelocityRange: Acceleration (±6g),\nGyroscope (±2000°\/s), Angle (X, Z-axis: ±180°, Y ±90°)Resolution: Acceleration\n(0.005g), Gyroscope (0.61°\/s)Angle Accuracy(after calibrated): X, Y-axis:\n0.05° (Static) , X, Y-axis: 0.1° (Dynamic) Note: Because the Z-axis angle is\ncalculated and anylyzed via the gyroscope. There will be acculated error on\nZ-axis angle by time when moving. It is required to calibrate. The bulk\ninquiry is welcome. Production capacity is 100,000pcs \/ month. If you have any\ninterest or need any help, please feel free to reach us. Hardware Analysis\nEmbedded highly-integrated MEMS accelerometer and gyroscope sensor, more\nstable and reliable in attitude measurementPremium power chip ensuring stable\nsupply voltage4-layer PCB design and using stamps holes gold-immersion process\nto prevent oxidation Cortex-M0 core processor Built-in Cortex-M0 core\nprocessor which can operate reaching 48MHZ, higher performance and low-power\nWITMOTION Algorithm Advantages WITMOTION products are derived from the\naerospace Satellite Attitude Determination Algorithm. Built-in core algorithm:\nR\u0026amp;D Dynamic Fusion AlgorithmKalman filtering (program filter)Digital\nfilteringState estimation algorithm Time and energy saving: No need to write a\nfiltering program or study the complicated protocol of MPU6050\/ 9250 to\nanalyze and collect the attitude angle data. Read more Small in Size \u0026amp; Easier\nfor Assembly With its clear circuit board design, orderly soldering joints,\nthe extended soldering scheme is diverse. Easy to solder and mount to\ncustomer's board. Net Weight: 1g Interface: TTL \/ IIC Size: 15.24mm x15.24mm\nX2mm\/ 0.6\" x 0.6\" x 0.08\" Humanity design, PIN connection in two rows orderly.\nFor details, please check the datasheet. Note: Operating temperature: -40℃ ~\n+85℃ Example Source Code Thanks to its diverse interface and small size, it is\nextremely suitable for the embedded systems.The sample codes would be provided\nto reduce the work and time spent on the writing program of MCU.Provided\nsample codes including 51 serial, C++, C, STM32, Arduino, and Matlab Tutorial\nManual \u0026amp; DatasheetFree software for Windows PC (Minimu.exe)APP for Android\nphoneInstruction video (search WITMOTION on Youtube)CH340 \u0026amp; CP2102 serial\nDrivers Packing List 1x WT61 inclinometer module2 Four pin male header\n(1x4)1x Instruction card printed with QR code of document center Our Promise:\n30 days return refund policy for any quality issueQuality secured, 100%\ninspected \u0026amp; tested at factory before shippingRemote diagnostics and lifetime\ntechnical support by Witmotion engineering team Read more Free \u0026amp; Genuinely\nUseful Software Compared with traditional sensor's simplified serial software,\nWITMOTION software offers several advantages over competing sensor:\nconfigurations settingdashboard, 3D DEMO, data curve \u0026amp; chart display in real-\ntimedata record and playback, raw data reviewing, and more Notice: There is no\nsoftware for the Linux, Python, or Mac system at present. Witmotion software\nis provided as free, compatible with the Windows system only, including Win\n10, 8, 7, XP. 3D DEMO More intuitive to view the sensor's motion state. There\nare 4 types of simulation, car, head, plane, cube. The source code of 3D can\nbe provided if customers have needs. Use Instructions with Windows PC:\nDownload the complete tutorial and unzip the file, follow the instructions of\nthe manual or video demo (There will be an instruction card printed with two\nQR codes indicating the document download link, one is Google Drive, another\nis Github. )Wiring Connection: USB-TTL serial converter cable (recommended\ncable B078GV9J1B ) PIN instruction: VCC-5V, GND-GND, RX crossly\nconnecting with TX, TX crossly connecting with RX.Install the driver of CH340,\nopen the software (Minimu.exe), the connection succeeds after auto-search\nfinishes Rock-solid data measurement in real-time The motion changing of the\nsensor will show on the data curve in real-time. Much easier and convenient\nfor data collection and application. The data can be recorded by simply click\nthe \"record\" button.Able to record and export the data to TXT format, offering\nyou a clear data-changing track. Config Menu Compared with traditional\nacceleration sensors, by simply changing its setting on software, various\nkinds of the configuration of the WitMotion sensor can be easily done.\nConfiguring the device enables the customer to address a broad variety of use\ncases by applying the sensor data filtered by WITMOTION algorithms. It is\nrecommended to proceed calibration if there is data drift. Acceleration\ncalibration (recommended to proceed when starting to use)Output rate,\nbandwidth setting( sensitivity adjustable ), measurement range selectableReset\nZ-axis angle to zero degreePlacement direction, and more PC software for\nWindows 3D Display Data Curve Display Configuration Android App WT61 supports\nserial connection with Android smartphones. Search WitMotion on Google Play\nStore and install the APP. Easy to set-up: wiring connection with the device,\nsimply chooses the 6-axis Series, select the corresponding com port and baud\nrate, start using. Please click the model you bought, you can find the User\nManual \u0026amp; PC software \u0026amp; APP \u0026amp; sample code \u0026amp; AD package by yourself. The\ntutorial website will be offered on the instruction card and product link.\nConfigurations Compared with other sensors, by simply click the button on APP,\nvarious kinds of the configuration of the WitMotion sensor can be easily done.\nAcceleration calibrationReset Z-axis angle to zero degreeOutput rate\nsettingPlacement direction, and more Data Curve The standard Android APP's new\nfeatures would be its data graph display. The motion changing of the sensor\nwill show on the data curve in real-time. INSTALLATION: Download and unzip the\ntutorial. Quickly and easily set up your sensors using the step-by-step guide\non the manual or video. Powerful data storage and export function All data can\nbe recorded by simply click the \"record\" button. Able to record and export the\ndata to TXT format, offering you a clear data-changing track and you can\nmanipulate it whatever you want! For data analysis please refer to the Chapter\nData Format of the datasheet. There will be a complete communication protocol\nprovided on the datasheet. Android App interface Config Menu Real-time Data\nViewing Recorded Data About WITMOTION Established in 2014, WitMotion Shenzhen\nCo., Ltd aims to become a global leader in attitude sensors, AHRS IMU. Foud\nout more here in our Witmotion Brand Store on Amazon. The company is dedicated\nto make attitude measurement and tilt angle sensing solutions more accessible\nand easier for engineers around the world. Widely used every day by customers\nin over 50 countries for energy and electric power, tower control, Monitoring,\nengineering machinery, medical, academic, integrated system, more developing\nprojects. WITMOTION' s R\u0026amp;D Dept. 20+professional engineer industry's top R\u0026amp;D\nteam, and has a long-term collaboration with the Beihang University PhD\nteam.WitMotion R\u0026amp;D protocol and Dynamic Fusion Algorithmover 50+ patents and\nsoftware program Research and Development Facilities: World's top-level of\ntriaxial nonmagnetic turntable: All finished items will be calibrated through\nthe turntable, ensuring the X Y Z angle's accuracy.High\u0026amp; low temperature test\nchamber, making sure that the sensor can actually work well under -40℃ ~ +85℃\nenvironmentVector Network Analyzers(VNA): Bluetooth antenna impedance\nmatching6 degrees of freedom vibration test bench: sensor's high performance\nand stability secured under vibration and dynamic environment Premium\nComponents \u0026amp; QC System: All components are selected and certified under a\nstrict quality control system from the procurement, manufacturing process to\nassembly, inspection. Automatic Production\u0026amp;Assemble line of Factory: Automatic\nSolder Paste Printing, Imported Placement Machine, Multi-temperature Reflow\nSoldering, Fully Automatic Inspection WT901 Tilt Angle Sensor WT61\nInclinometer WT931 500Hz High-speed Inclinometer WT901SD Gyroscope Sensor\nHWT31 Military-grade Accelerometer RM3100 Digital Compass Compatibility\nWindows PC, Android smartphones, MCU Arduino, Raspberry pi, etc. Windows PC,\nAndroid smartphones, MCU Arduino, Raspberry pi, etc. Windows PC, Android\nsmartphones, iOS iPhone, etc. Windows PC, Android smartphones etc. Windows PC,\nAndroid smartphones, MCU Arduino, Raspberry pi, etc. Windows PC, Android\nsmartphones, MCU Arduino, Raspberry pi, etc. Connectivity TTL TTL TTL TTL TTL\nSPI Input Voltage 3.3-5V 3.3-5V 3.3-5V 3.3-5V 3.3-5V 3.3-5V 3-Axis\nAcceleration ✓ ✓ ✓ ✓ ✓ 3-Axis Angular velocity (Gyroscope) ✓ ✓ ✓ ✓ ✓ 3-Axis\nAngle ✓ ✓ ✓ ✓ ✓ 3-Axis Magnetic Field ✓ ✓ ✓ ✓ ✓ Output Frequency 0.2HZ--200HZ\n0.2HZ--100HZ 0.2HZ--500HZ 0.2HZ--200HZ 0.2HZ--200HZ Main Features 9-axis High\nAccuracy sensor, Kalman Filtering 6-axis High Accuracy Dual-axis tilt angle\nsensor, Kalman Filtering 500Hz high-stability output rate SD card data\nstorage, data reviewing in real-time, offline data recording Excellent bias\nstability, SCA3300 Temp-compensation, low noise level and linearity Military-\ngrade accuracy, High Resolution, Magnetomerter compensation\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh Performance Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle, measurement range and output rate ( 0.2-100Hz) selectable\u003c\/li\u003e\n \u003cli\u003eRobust Design Cortex-M0 core processor, highly-integrated MEMS, and Kalman Algorithm combine to deliver measurement accuracy at 0.05 degree(X, Y-axis), small in size, diverse interface, professional for customer's integration project\u003c\/li\u003e\n \u003cli\u003eWorry-free Support 12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com\u003c\/li\u003e\n \u003cli\u003eWhat You Get 1*WT61 Accelerometer sensor, 2* 4-pin male header (1x4), 1 x Welcome guide (USB-UART converter not included )\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T06:33:16+11:00","created_at":"2022-03-19T06:33:16+11:00","vendor":"WITMOTION","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":14400,"price_min":14400,"price_max":14400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336209965236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07GBQZ336","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi","public_title":null,"options":["Default Title"],"price":14400,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"WT61","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07GBQZ336.jpg?v=1648586292","\/\/auspowers.com\/cdn\/shop\/products\/61C71FreGhL.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/71rtbEV1-0L.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/719bKfwhpdL.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/61Hy3BRDPWL.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/710jjOQi2yL.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/61Z2OwjXd0L.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/61eVzzio_YL.jpg?v=1647631996","\/\/auspowers.com\/cdn\/shop\/products\/71Qba2Z1dOL.jpg?v=1647631996"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07GBQZ336.jpg?v=1648586292","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25352398012596,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07GBQZ336.jpg?v=1648586292"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07GBQZ336.jpg?v=1648586292","width":1000},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224317620,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61C71FreGhL.jpg?v=1647631996"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61C71FreGhL.jpg?v=1647631996","width":1000},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224350388,"position":3,"preview_image":{"aspect_ratio":1.164,"height":859,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71rtbEV1-0L.jpg?v=1647631996"},"aspect_ratio":1.164,"height":859,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71rtbEV1-0L.jpg?v=1647631996","width":1000},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224383156,"position":4,"preview_image":{"aspect_ratio":0.741,"height":1619,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/719bKfwhpdL.jpg?v=1647631996"},"aspect_ratio":0.741,"height":1619,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/719bKfwhpdL.jpg?v=1647631996","width":1200},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224415924,"position":5,"preview_image":{"aspect_ratio":1.024,"height":977,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Hy3BRDPWL.jpg?v=1647631996"},"aspect_ratio":1.024,"height":977,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Hy3BRDPWL.jpg?v=1647631996","width":1000},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224448692,"position":6,"preview_image":{"aspect_ratio":0.519,"height":1561,"width":810,"src":"\/\/auspowers.com\/cdn\/shop\/products\/710jjOQi2yL.jpg?v=1647631996"},"aspect_ratio":0.519,"height":1561,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/710jjOQi2yL.jpg?v=1647631996","width":810},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224481460,"position":7,"preview_image":{"aspect_ratio":1.079,"height":927,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Z2OwjXd0L.jpg?v=1647631996"},"aspect_ratio":1.079,"height":927,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Z2OwjXd0L.jpg?v=1647631996","width":1000},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224514228,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61eVzzio_YL.jpg?v=1647631996"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61eVzzio_YL.jpg?v=1647631996","width":1000},{"alt":"[Australia - AusPower] - 【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi ","id":25208224546996,"position":9,"preview_image":{"aspect_ratio":0.589,"height":1697,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71Qba2Z1dOL.jpg?v=1647631996"},"aspect_ratio":0.589,"height":1697,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71Qba2Z1dOL.jpg?v=1647631996","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e【WT61 Accelerometer+Tilt Sensor】High-Stability Acceleration(+-16g)+Gyro+Angle(XY Dual-axis) with Kalman Filter, MPU6050 AHRS IMU (Unaffected by Magnetic Field), for PC\/Arduino\/Raspberry Pi\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHighlights WT61’s scientific name is the AHRS IMU sensor.\nA sensor measures 3-axis angle, angular velocity, acceleration. Its strength\nlies in the algorithm which can calculate the X and Y axis angle accurately.\nRobust MEMS design and small in sizeGround breaking bias stability, low noise\nlevel Persued for best data accuracy and stability: WTMOTION patented zero-\nbias automatic detection calibration algorithm and R\u0026amp;D dynamic fusion\nalgorithm outperforms traditional accelerometer sensor Technical\nSpecifications: Current: \u0026lt;10mAVoltage: 3.3-5V (requiring a power source of\n3.3-5V)Data output frequency：20Hz \/ 100HzBaud Rate: 9200 \/ 115200 Output\nContent: 3-axis Acceleration+Angle+Angular VelocityRange: Acceleration (±6g),\nGyroscope (±2000°\/s), Angle (X, Z-axis: ±180°, Y ±90°)Resolution: Acceleration\n(0.005g), Gyroscope (0.61°\/s)Angle Accuracy(after calibrated): X, Y-axis:\n0.05° (Static) , X, Y-axis: 0.1° (Dynamic) Note: Because the Z-axis angle is\ncalculated and anylyzed via the gyroscope. There will be acculated error on\nZ-axis angle by time when moving. It is required to calibrate. The bulk\ninquiry is welcome. Production capacity is 100,000pcs \/ month. If you have any\ninterest or need any help, please feel free to reach us. Hardware Analysis\nEmbedded highly-integrated MEMS accelerometer and gyroscope sensor, more\nstable and reliable in attitude measurementPremium power chip ensuring stable\nsupply voltage4-layer PCB design and using stamps holes gold-immersion process\nto prevent oxidation Cortex-M0 core processor Built-in Cortex-M0 core\nprocessor which can operate reaching 48MHZ, higher performance and low-power\nWITMOTION Algorithm Advantages WITMOTION products are derived from the\naerospace Satellite Attitude Determination Algorithm. Built-in core algorithm:\nR\u0026amp;D Dynamic Fusion AlgorithmKalman filtering (program filter)Digital\nfilteringState estimation algorithm Time and energy saving: No need to write a\nfiltering program or study the complicated protocol of MPU6050\/ 9250 to\nanalyze and collect the attitude angle data. Read more Small in Size \u0026amp; Easier\nfor Assembly With its clear circuit board design, orderly soldering joints,\nthe extended soldering scheme is diverse. Easy to solder and mount to\ncustomer's board. Net Weight: 1g Interface: TTL \/ IIC Size: 15.24mm x15.24mm\nX2mm\/ 0.6\" x 0.6\" x 0.08\" Humanity design, PIN connection in two rows orderly.\nFor details, please check the datasheet. Note: Operating temperature: -40℃ ~\n+85℃ Example Source Code Thanks to its diverse interface and small size, it is\nextremely suitable for the embedded systems.The sample codes would be provided\nto reduce the work and time spent on the writing program of MCU.Provided\nsample codes including 51 serial, C++, C, STM32, Arduino, and Matlab Tutorial\nManual \u0026amp; DatasheetFree software for Windows PC (Minimu.exe)APP for Android\nphoneInstruction video (search WITMOTION on Youtube)CH340 \u0026amp; CP2102 serial\nDrivers Packing List 1x WT61 inclinometer module2 Four pin male header\n(1x4)1x Instruction card printed with QR code of document center Our Promise:\n30 days return refund policy for any quality issueQuality secured, 100%\ninspected \u0026amp; tested at factory before shippingRemote diagnostics and lifetime\ntechnical support by Witmotion engineering team Read more Free \u0026amp; Genuinely\nUseful Software Compared with traditional sensor's simplified serial software,\nWITMOTION software offers several advantages over competing sensor:\nconfigurations settingdashboard, 3D DEMO, data curve \u0026amp; chart display in real-\ntimedata record and playback, raw data reviewing, and more Notice: There is no\nsoftware for the Linux, Python, or Mac system at present. Witmotion software\nis provided as free, compatible with the Windows system only, including Win\n10, 8, 7, XP. 3D DEMO More intuitive to view the sensor's motion state. There\nare 4 types of simulation, car, head, plane, cube. The source code of 3D can\nbe provided if customers have needs. Use Instructions with Windows PC:\nDownload the complete tutorial and unzip the file, follow the instructions of\nthe manual or video demo (There will be an instruction card printed with two\nQR codes indicating the document download link, one is Google Drive, another\nis Github. )Wiring Connection: USB-TTL serial converter cable (recommended\ncable B078GV9J1B ) PIN instruction: VCC-5V, GND-GND, RX crossly\nconnecting with TX, TX crossly connecting with RX.Install the driver of CH340,\nopen the software (Minimu.exe), the connection succeeds after auto-search\nfinishes Rock-solid data measurement in real-time The motion changing of the\nsensor will show on the data curve in real-time. Much easier and convenient\nfor data collection and application. The data can be recorded by simply click\nthe \"record\" button.Able to record and export the data to TXT format, offering\nyou a clear data-changing track. Config Menu Compared with traditional\nacceleration sensors, by simply changing its setting on software, various\nkinds of the configuration of the WitMotion sensor can be easily done.\nConfiguring the device enables the customer to address a broad variety of use\ncases by applying the sensor data filtered by WITMOTION algorithms. It is\nrecommended to proceed calibration if there is data drift. Acceleration\ncalibration (recommended to proceed when starting to use)Output rate,\nbandwidth setting( sensitivity adjustable ), measurement range selectableReset\nZ-axis angle to zero degreePlacement direction, and more PC software for\nWindows 3D Display Data Curve Display Configuration Android App WT61 supports\nserial connection with Android smartphones. Search WitMotion on Google Play\nStore and install the APP. Easy to set-up: wiring connection with the device,\nsimply chooses the 6-axis Series, select the corresponding com port and baud\nrate, start using. Please click the model you bought, you can find the User\nManual \u0026amp; PC software \u0026amp; APP \u0026amp; sample code \u0026amp; AD package by yourself. The\ntutorial website will be offered on the instruction card and product link.\nConfigurations Compared with other sensors, by simply click the button on APP,\nvarious kinds of the configuration of the WitMotion sensor can be easily done.\nAcceleration calibrationReset Z-axis angle to zero degreeOutput rate\nsettingPlacement direction, and more Data Curve The standard Android APP's new\nfeatures would be its data graph display. The motion changing of the sensor\nwill show on the data curve in real-time. INSTALLATION: Download and unzip the\ntutorial. Quickly and easily set up your sensors using the step-by-step guide\non the manual or video. Powerful data storage and export function All data can\nbe recorded by simply click the \"record\" button. Able to record and export the\ndata to TXT format, offering you a clear data-changing track and you can\nmanipulate it whatever you want! For data analysis please refer to the Chapter\nData Format of the datasheet. There will be a complete communication protocol\nprovided on the datasheet. Android App interface Config Menu Real-time Data\nViewing Recorded Data About WITMOTION Established in 2014, WitMotion Shenzhen\nCo., Ltd aims to become a global leader in attitude sensors, AHRS IMU. Foud\nout more here in our Witmotion Brand Store on Amazon. The company is dedicated\nto make attitude measurement and tilt angle sensing solutions more accessible\nand easier for engineers around the world. Widely used every day by customers\nin over 50 countries for energy and electric power, tower control, Monitoring,\nengineering machinery, medical, academic, integrated system, more developing\nprojects. WITMOTION' s R\u0026amp;D Dept. 20+professional engineer industry's top R\u0026amp;D\nteam, and has a long-term collaboration with the Beihang University PhD\nteam.WitMotion R\u0026amp;D protocol and Dynamic Fusion Algorithmover 50+ patents and\nsoftware program Research and Development Facilities: World's top-level of\ntriaxial nonmagnetic turntable: All finished items will be calibrated through\nthe turntable, ensuring the X Y Z angle's accuracy.High\u0026amp; low temperature test\nchamber, making sure that the sensor can actually work well under -40℃ ~ +85℃\nenvironmentVector Network Analyzers(VNA): Bluetooth antenna impedance\nmatching6 degrees of freedom vibration test bench: sensor's high performance\nand stability secured under vibration and dynamic environment Premium\nComponents \u0026amp; QC System: All components are selected and certified under a\nstrict quality control system from the procurement, manufacturing process to\nassembly, inspection. Automatic Production\u0026amp;Assemble line of Factory: Automatic\nSolder Paste Printing, Imported Placement Machine, Multi-temperature Reflow\nSoldering, Fully Automatic Inspection WT901 Tilt Angle Sensor WT61\nInclinometer WT931 500Hz High-speed Inclinometer WT901SD Gyroscope Sensor\nHWT31 Military-grade Accelerometer RM3100 Digital Compass Compatibility\nWindows PC, Android smartphones, MCU Arduino, Raspberry pi, etc. Windows PC,\nAndroid smartphones, MCU Arduino, Raspberry pi, etc. Windows PC, Android\nsmartphones, iOS iPhone, etc. Windows PC, Android smartphones etc. Windows PC,\nAndroid smartphones, MCU Arduino, Raspberry pi, etc. Windows PC, Android\nsmartphones, MCU Arduino, Raspberry pi, etc. Connectivity TTL TTL TTL TTL TTL\nSPI Input Voltage 3.3-5V 3.3-5V 3.3-5V 3.3-5V 3.3-5V 3.3-5V 3-Axis\nAcceleration ✓ ✓ ✓ ✓ ✓ 3-Axis Angular velocity (Gyroscope) ✓ ✓ ✓ ✓ ✓ 3-Axis\nAngle ✓ ✓ ✓ ✓ ✓ 3-Axis Magnetic Field ✓ ✓ ✓ ✓ ✓ Output Frequency 0.2HZ--200HZ\n0.2HZ--100HZ 0.2HZ--500HZ 0.2HZ--200HZ 0.2HZ--200HZ Main Features 9-axis High\nAccuracy sensor, Kalman Filtering 6-axis High Accuracy Dual-axis tilt angle\nsensor, Kalman Filtering 500Hz high-stability output rate SD card data\nstorage, data reviewing in real-time, offline data recording Excellent bias\nstability, SCA3300 Temp-compensation, low noise level and linearity Military-\ngrade accuracy, High Resolution, Magnetomerter compensation\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eHigh Performance Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle, measurement range and output rate ( 0.2-100Hz) selectable\u003c\/li\u003e\n \u003cli\u003eRobust Design Cortex-M0 core processor, highly-integrated MEMS, and Kalman Algorithm combine to deliver measurement accuracy at 0.05 degree(X, Y-axis), small in size, diverse interface, professional for customer's integration project\u003c\/li\u003e\n \u003cli\u003eWorry-free Support 12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com\u003c\/li\u003e\n \u003cli\u003eWhat You Get 1*WT61 Accelerometer sensor, 2* 4-pin male header (1x4), 1 x Welcome guide (USB-UART converter not included )\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086973845684,"title":"Thunder Parts | Speed Sensors | Magnetic Pick Up (Heavy Duty) | Exact Generic Replacement for Datcon: P\/N 71256-00 | 1 Year Warranty!","handle":"thunder-parts-speed-sensors-magnetic-pick-up-heavy-duty-exact-generic-replacement-for-datcon-p-n-71256-00-1-year-warranty","description":"\u003ch3\u003eThunder Parts | Speed Sensors | Magnetic Pick Up (Heavy Duty) | Exact Generic Replacement for Datcon: P\/N 71256-00 | 1 Year Warranty!\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e233232\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eConnection Lead wires (2)\u003c\/li\u003e\n \u003cli\u003eThread 3\/4 x 16 UNF\u003c\/li\u003e\n \u003cli\u003eLength 3.4\u003c\/li\u003e\n \u003cli\u003eWire 5\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T06:30:08+11:00","created_at":"2022-03-19T06:30:08+11:00","vendor":"Thunder Parts","type":"Acceleration Sensors","tags":["auspowers_batchone"],"price":16400,"price_min":16400,"price_max":16400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336199479476,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07PPPJR52","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Thunder Parts | Speed Sensors | Magnetic Pick Up (Heavy Duty) | Exact Generic Replacement for Datcon: P\/N 71256-00 | 1 Year Warranty!","public_title":null,"options":["Default Title"],"price":16400,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"23232","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07PPPJR52.jpg?v=1648586171","\/\/auspowers.com\/cdn\/shop\/products\/31YuLjnRN3L.jpg?v=1647631808"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07PPPJR52.jpg?v=1648586171","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Thunder Parts | Speed Sensors | Magnetic Pick Up (Heavy Duty) | Exact Generic Replacement for Datcon: P\/N 71256-00 | 1 Year Warranty! ","id":25352386609332,"position":1,"preview_image":{"aspect_ratio":1.003,"height":997,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07PPPJR52.jpg?v=1648586171"},"aspect_ratio":1.003,"height":997,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07PPPJR52.jpg?v=1648586171","width":1000},{"alt":"[Australia - AusPower] - Thunder Parts | Speed Sensors | Magnetic Pick Up (Heavy Duty) | Exact Generic Replacement for Datcon: P\/N 71256-00 | 1 Year Warranty! ","id":25208191385780,"position":2,"preview_image":{"aspect_ratio":1.357,"height":258,"width":350,"src":"\/\/auspowers.com\/cdn\/shop\/products\/31YuLjnRN3L.jpg?v=1647631808"},"aspect_ratio":1.357,"height":258,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/31YuLjnRN3L.jpg?v=1647631808","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eThunder Parts | Speed Sensors | Magnetic Pick Up (Heavy Duty) | Exact Generic Replacement for Datcon: P\/N 71256-00 | 1 Year Warranty!\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e233232\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eConnection Lead wires (2)\u003c\/li\u003e\n \u003cli\u003eThread 3\/4 x 16 UNF\u003c\/li\u003e\n \u003cli\u003eLength 3.4\u003c\/li\u003e\n \u003cli\u003eWire 5\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}