Waveshare ESP32-S3 7 Inch Capacitive Touch Display Development Board, ESP32 with 800 x 480 Resolution 65k RGB 7 Inch LCD Screen, 5-Point Touch, Supports WiFi and Bluetooth
Waveshare ESP32-S3 7 Inch Capacitive Touch Display Development Board, ESP32 with 800 x 480 Resolution 65k RGB 7 Inch LCD Screen, 5-Point Touch, Supports WiFi and Bluetooth
Overview ESP32-S3 7 inch capacitive touch display development board, ESP32 with display, 800 x 480, 5-point touch, 32-bit LX7 dual-core processor, up to 240 MHz. Frequency, supports WiFi and Bluetooth, with onboard antenna. Introduction The ESP32-S3-Touch LCD-7 is a low-cost, high-performance microcontroller development board designed by Waveshare. It features 2.4GHz WiFi and BLE 5, Integrates large Flash storage and PSRAM, and a 7-inch capacitive touch LCD screen. Support running GUI interface demos such as LVGL. It also has multiple external peripheral interfaces (such as CAN, I2C, RS485, and Sensor) for developing applications such as HMI on ESP32-S3. With various functions and interfaces, it is suitable for power requirements in IoT, mobile devices, wearable electronics, and smart home applications. Development Resources Package contents: ESP32-S3-Touch LCD 7x1 HY2.0 2P to 2PIN male cable 10cm ×2 HY2.0 2P to 3PIN male cable 10cm ×1 HY2.0 2P to 4PIN male cable 10cm ×2 FAQ 1. Why is the screen not displaying? You can refer to the following steps to run the demo for comparison: 1) Before running the program, please install the library 2) Installation library video reference. Run and burn original program. 2. ESP32-S3 touch LCD 7 fails to compile an Arduino demo for the RGB screen and shows errors? Check if the ESP32-S3-Touch-LCD-7_libraries is installed. Please refer to installation steps. 3.Why burn lvgl program missing lv_cong.h when all libraries are installed? The library file cannot be retrieved because the path to install the library contains Chinese.
Product Features
- ESP32-S3 development board onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors.
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Built-in 512KB SRAM and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM.
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.Support capacitive touch control via I2C interface, 5-point touch with interrupt support.
- Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port.
- Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.