TTL to RS485 Adapter Module, Pack of 2 Level Converter Borad, Automatic Flow Direction Control 3.3V-5V 485 to TTL Signal Single Chip with RXD, TXD Display, 24AWG Cable
TTL to RS485 Adapter Module, Pack of 2 Level Converter Borad, Automatic Flow Direction Control 3.3V-5V 485 to TTL Signal Single Chip with RXD, TXD Display, 24AWG Cable
Parameters: Wide voltage power supply: 3.0 V ~ 30 V. Limit voltage: 33 V. Minimum voltage: >2.8 V. Working temperature: -40℃~+85℃. Baud rate: 110~256000bps. Features: 1. Wide voltage power supply (3.0V ~ 30V), the limit voltage of 33V, it is recommended to use within 30V, the minimum voltage is higher than 2.8V. 2. Has a very high EMC and EMI performance. 3. Compatible with 3.3V and 5.0V signals, can match the module. 4. With RXD, TXD signal indicator, send and receive situation panoramic view. 5.With a standard 2.54 pitch pin, to facilitate your secondary development; With a terminal block and silicone wire, the use of very convenient. 6. With 120 ohm matching resistance, shorted R0 can be enabled to match the resistance, recommended shorted for long-distance transmission. 7. Support multi-machine communication, the same network can connect at least 40 nodes. 8. Can be hot- swappable, there will be no signal to death phenomenon. 9. Using anti-jamming alignment and copper to prevent signal interference. Package includes: 2 x TTL to RS485 signal converter modules. 2x 2.54 White Socket with 4P Lines 1 x 50 cm ultra flexible cable 24AWG.
Product Features
- Voltage range wide voltage power supply (3.0V~30V), the limit voltage of 33V, it is recommended to use within 30V, the minimum voltage is higher than 2.8V Baud rate: 110~256000bps; operating temperature range: -40C to +85C.
- Indicator light TXD and RXD display, the TTL to RS485 adapter is equipped with an indicator light for sending data and an indicator light for receiving data, which is convenient for your monitoring.
- Function Compatible with 3.3V and 5.0V signals, with lightning protection and anti-jamming function and high EMC, EMI performance, multi-machine communication
- Transmission distanceThe transmission distance can be up to kilometers (test with 850 meters 2 x 1.5 cables, it is recommended to use within 800 meters, if more than 800 meters, please add repeater)
- Package includes 2 x TTL to RS485 signal converter module, 2 x 2.54 white female with 4P lines, 1 x 50 cm ultra-flexible cable 24 AWG