TCA9548A IIC Multiplexer Breakout Board 1.8 V - 5 V 8 Channel I2C Communication Switch Development Expansion Board with Reset for Arduino (Pack of 5)
TCA9548A IIC Multiplexer Breakout Board 1.8 V - 5 V 8 Channel I2C Communication Switch Development Expansion Board with Reset for Arduino (Pack of 5)
Parameters: Working voltage: 1.65 V ~ 5.5 V. IIC clock frequency: 0~400KHz. Working environment temperature: -40℃~85℃. Small board size: 31.5x21.4mm/1.24x0.84in, with two M3 mounting holes Features: 1 to 8 bidirectional translating switches Active-low reset input Three address pins—up to 8 TCA9548A devices on the same I2C bus Channel selection through an I2C bus Operating power supply voltage range: 1.65V to 5.5V 5V tolerant pins Introducing: The I2C communication protocol allows you to communicate with multiple I2C devices on the same I2C bus as long as all devices have a unique I2C address. However, it will not work if you want to connect multiple I2C devices with the same address. I2C multiplexer allows you to communicate with up to 8 I2C devices with the same I2C bus. The multiplexer communicates with a microcontroller using the I2C communication protocol. Then, you can select which I2C bus on the multiplexer you want to address. To address a specific port, you just need to send a single byte to the multiplexer with the desired output port number. Package includes: 5 x TCA9548A I2C IIC multiplexer breakout board. "
Product Features
- Interface: There are 8 I2C interfaces on 1 expander, equipped with 8 bi-directional switches that can be controlled via the I2C bus. This means that after 1 expander is connected, 8 devices with the same address can be connected to the same I2C port and used normally.
- Standard address: The default address of this expander is 0 x 70, the address can be changed and set between 0 x 70 and 0 x 77 as required.
- Compatible with IIC bus and system management bus, active low reset input, support for hot insertion, low standby current. No glitch pulse when power on, support voltage between 1.8V, 2.5V, 3.3V and 5V bus flat conversion.
- Features: 8 expanders can be cascaded within the address 0x70~0x77, and each expander can be connected to 8 devices with the same address, realizing that the same I2C interface is connected to 64 devices with the same address and normal use.
- Package includes: you will receive 5 x TCA9548A I2C IIC multiplexer breakout board.