SunnyPro for Epson Home Cinema 8350 Replacement Bulb ELPLP49 V13H010L49 Compatible with Epson H373a Lamp H419a Projector Replacement Lamp with housing
SunnyPro for Epson Home Cinema 8350 Replacement Bulb ELPLP49 V13H010L49 Compatible with Epson H373a Lamp H419a Projector Replacement Lamp with housing
Description
Projector Lamp Type: Projector lamp with Housing Compatible with Projector models: Epson EH-TW2800 EH-TW2900 EH-TW3000 EH- TW3200 EH-TW3500 EH-TW3600 EH-TW3800 EH-TW4000 EH-TW4400 EH-TW4500 EH-TW5000 EH-TW5500 EH-TW5800 EH-TW8500 ELP-LP49 EMP-TW3800 EMP-TW5000 EMP-TW5500 H291A H292A H293A H336A H337A H373B Home Cinema 6100 Home Cinema 6500UB Home Cinema 7100 Home Cinema 7500UB Home Cinema 8100 Home Cinema 8350 Home Cinema 8500UB Home Cinema 8700UB Home Cinema 9500UB Powerlite 6500UB Powerlite 9700UB Powerlite HC 6100 Powerlite HC 6500UB Powerlite HC 7100 Powerlite HC 8100 Powerlite HC 8345 Powerlite HC 8350 Powerlite HC 8500UB Powerlite HC 8700UB Powerlite Home Cinema 8100 Powerlite Home Cinema 8345 Powerlite Home Cinema 8350 Powerlite Home Cinema 8500 Powerlite Home Cinema 8700 Powerlite PC 7100 Powerlite PC 7500UB Powerlite PC 9100 Powerlite PC 9350 Powerlite PC 9500UB Powerlite Pro Cinema 7100 Powerlite Pro Cinema 9100 Read more Step 1. Unplug the power cord from your projector and let the lamp cool down. Step 2. Locate the lamp access panel on your projector and remove the screws and access panel. Step 3. Remove any screws holding the lamp housing into the projector. Step 4. Reach in and firmly pull the lamp housing out of the projector. Step 5. Place the new lamp housing into the projector in the same orientation as you removed the old lamp. Step 6. Wiggle the lamp into place and make sure full contact is made inside of the projector. Step 7. Replace the lamp mounting screws to secure the lamp into the projector. Step 8. Replace the lamp access panel and secure the screws. Step 9. Plug in your projector and power it on. Step 10. Reset the lamp counter. Some lamps will reset the lamp counter automatically when a new lamp is placed in. Read more Where is My Projector Lamp Located A projector lamp can be found by locating a square or rectangular plastic plate somewhere on the outside of the projector; the plate is usually on the bottom of the projector, but can sometimes be found on the top or sides. This cover is usually secured by two screws; undo these screws and lift the plate off to reveal the bottom of the plastic housing (the module) that holds the projector lamp in place in your projector. This plastic housing usually has a handle attached to it. Pull gently on this handle to remove the projector lamp from your projector. It is time to replace the lamp when: Picture has become dull and lacks brightness. There is an obvious decline in picture clarity and sharpness. Your lamp is flickering. There is difficulty or a delay when turning the machine on. A light comes on that warns you that it may be time to change your lamp. Note: 1. Let the lamp cool down before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 2. Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 3. Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on. Read more
Features:
- Compatible with the following EPSON projector Models: EPSON Home cinema 8350, EH-TW5500, H373a, H419a, Eh-th5500, EH-TW2800,EH-TW2900,EH-TW3000,EH-TW3200,EH-TW3500,EH-TW3600,EH-TW3800,EH-TW4000,EH-TW4400,EH-TW4500,EH-TW5000,EH-TW5800,EH-TW8500,EMP-TW3800,EMP-TW5000,EMP-TW5500,H291A,H291B,H291F,H292A,H293A,H293B,H336A,H336F,H336F,H337A,H338A,H373B,H373F,H416A,H416B,H419A,H420A,PowerLite HC 6100,PowerLite HC 9700UB,PowerLite HC 6500UB,PowerLite HC 8100,PowerLite HC 8345,PowerLite HC 8350
- Projector Lamp with Housng
- All lamps are produced by our own factory
- All lamps are tested at our factory before leaving the facility
- Cheaper Bare Lamp without Housing Also Available for Sale