STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 45Ncm(63.7oz.in). It's ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. The motor is supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print! 100% brand new of "STEPPERONLINE", and ROHS and CE certificated. Electrical Specification: Manufacturer Part Number: 17HS16-2004S Motor Type: Bipolar Stepper Step Angle: 1.8 deg. Holding Torque: 45Ncm(63.7oz.in) Rated Current/phase: 2A Phase Resistance: 1.1ohms Inductance: 2.6mH+/-20%(1KHz) Physical Specification: Frame Size: 42 x 42mm Body Length: 40mm Shaft Diameter: 5mm Shaft Length: 23mm D-cut Length: 21mm Number of Leads: 4 Lead Length: 1000mm Weight: 310g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor. To choose a driver, please make sure the driver's output current not higher than motor rated current, and voltage not higher than 36V. Please take care of four wires coils order when you connecting to driver, or it will damage your driver.
Product Features
- 45Ncm(63.7oz.in) holding torque
- NEMA 17 bipolar 1.65"x1.65"x1.57" 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2A & resistance 1.1ohms
Related Products
STEPPERONLINE High Torque Nema 1...
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor
$159.00 AUD
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part Number: 17HS24-2104S Motor Type:...
BZ 3D GT2 Timing Belt 6mm...
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M
$124.00 AUD
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service! Product Features Upg...
Usongshine 12 Pieces 3D Printer ...
Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4
$74.00 AUD
Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 Usongshine 3D printer nozzles MK8 extruder nozzles Perfectly circular and with thread size. The extrusion holes are centered and concentric, the bore is smooth, and the threads are clean, connect with M6 from the thread, easy to install, fits the part...
Treedix RAMPS 1.4 Control Panel ...
Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560
$88.00 AUD
Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA pl...
3D Printing Build Surface, 8.66"...
3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm
$124.00 AUD
3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer Specification: Color: blue Size: 8.66" x 8.66" (220x220mm) Working temperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not higher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a better direction of magne...
iMetrx (1PCS)42×23MM Nema 17 Ste...
iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(>200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1
$124.00 AUD
iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(>200mN.m) Motor with 1M Cable for DIY CNC 3D Printer Product Features Excellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the m...
Teyleten Robot New TL-Smoother V...
Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)
$84.00 AUD
Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) Specification: Name: Stepper Motor Driver Filter TL Smoother Filter Size:4x3cm/1.57x1.18in Material:ABS+Metal Weight:40g Product Features TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especia...
BALITENSEN 260mm x 260mm x 3mm...
BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed
$180.00 AUD
BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer Build Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length tolerance: +/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1 Product Features ...
Wisamic 3 Pack 220mmx220mm 3D Pr...
Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel
$111.00 AUD
Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel Specification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black Compatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build Surface Product Features Easy installation - This 3D printi...
25Pcs 3D Printer Nozzle Kit MK8...
25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5
$84.00 AUD
25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 Applicability and Compatibility MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm P...
2Pack A4988 Stepstick Stepper Mo...
2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red
$81.00 AUD
2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red Specifications: The drive current: 2A (best to install the heat sink) 3.3 and 5 V compatible logic supply five optional step mode: full, 1/2, 1/4, 1/8 and 1/16 Features: Low RDS (ON) outputs Automatic current decay mod...
Official Creality New Upgrade Mo...
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard
$220.00 AUD
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board This new upgraded silent mainboard does not currently come pre-installed on our Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the silent motherboard is a separate upgrade for all 3 ...
Creality 3D Printer 42-40 Steppe...
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series
$147.00 AUD
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series 42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series,like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / ...