{"id":7085132218548,"title":"Scotch-Brite (TM) Surface Conditioning Belt, 72\" Length x 2\" Width, Very Fine, Blue (Pack of 1)","handle":"scotch-brite-tm-surface-conditioning-belt-72-length-x-2-width-very-fine-blue-pack-of-1","description":"\u003ch3\u003eScotch-Brite (TM) Surface Conditioning Belt, 72\" Length x 2\" Width, Very Fine, Blue (Pack of 1)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProduct description 3M Scotch-Brite non-woven SC-BS sanding belt uses aluminum\noxide as the abrasive material. Since this product is non-woven, grade is\ngenerally used to describe the abrasiveness; with the 00579 having a very fine\ngrade. This particular 3M sanding belt is 2 in wide by 72 in long. From the\nManufacturer The 3M™ Scotch-Brite™ Surface Conditioning Belt in very fine\ngrade is a durable belt engineered to perform detail work such as blending,\nblending corners, cleaning, contour finishing, deburring, deburring edges,\nfine finishing, flat finishing, setting the grain, stainless steel finishing,\nand attaining straightline - brushed finish on a variety of metals. Very fine\ngrade abrasive and high operating speed provides an effective means to achieve\nprofessional stainless steel finishes. The non-woven fiber construction runs\ncool, resists loading, and maintains edge durability while aluminum oxide\nabrasives provide a high cut-rate for consistent finishing performance over\nthe life of the belt. The 3M™ Scotch-Brite™ Surface Conditioning belt works\nwell to remove coarse grindlines, mill marks, or small burrs left by cutting\ntools or conventional abrasives. Thin width belts are ideal for blending and\nfinishing right angle welds on stainless steel. The Scotch-Brite Surface\nConditioning Belt uses course grade aluminum oxide abrasive. Aluminum oxide is\na popular choice among industrial professionals because of its cut-rate and\nlong life. This mineral is a tough, durable abrasive that self-fractures to\nexpose fresh cutting edges in use, whereas traditional abrasives, such as\ngarnet, quickly wear down with use. Due to its high cut-rate, hardness,\nstrength, and low heat retention, aluminum oxide mineral is widely used in\ngrinding applications in addition to sanding and finishing use. Aluminum oxide\nis suitable on a wide variety of substrates in both woodworking and\nmetalworking, including ferrous alloys. Belt sanders are used for rapid\ngrinding, sanding and finishing on a variety of surfaces. Depending on the\nmaterial being worked, sanding wheels and discs may clog, quickly making them\nless efficient, while belt sanders continue to sand without clogging because\nsmall grooves in the abrasive belt open as they go around the arc of the drive\nwheel. For more than a century, 3M has applied innovation and technology to\nimproving our customers’ lives and supporting their business goals. Today the\ncompany, from its headquarters in St. Paul, Minnesota, serves industrial and\ncommercial customers and consumers in nearly 200 countries. Abrasive Systems\nproducts, including a complete line of coated abrasives, microfinishing and\nmicroreplicated abrasives, and hardware accessories, provide the finishing\ntouch for almost any surface conditioning application. The 3M brand, across\nthousands of products, represents consistency, superior quality, and value.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSale Unit: BELT\u003c\/li\u003e\n \u003cli\u003eTrade Name: Scotch-Brite\u003c\/li\u003e\n \u003cli\u003eAbrasive Type: Non-Woven\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-17T15:54:02+11:00","created_at":"2022-03-17T15:54:02+11:00","vendor":"3M","type":"Abrasive Belts","tags":["auspowers_batchone"],"price":16700,"price_min":16700,"price_max":16700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41331602161844,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0002FU7IS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Scotch-Brite (TM) Surface Conditioning Belt, 72\" Length x 2\" Width, Very Fine, Blue (Pack of 1)","public_title":null,"options":["Default Title"],"price":16700,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":"048011005799","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0002FU7IS.jpg?v=1648522292"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0002FU7IS.jpg?v=1648522292","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Scotch-Brite (TM) Surface Conditioning Belt, 72\" Length x 2\" Width, Very Fine, Blue (Pack of 1) ","id":25341016408244,"position":1,"preview_image":{"aspect_ratio":0.832,"height":2560,"width":2130,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0002FU7IS.jpg?v=1648522292"},"aspect_ratio":0.832,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0002FU7IS.jpg?v=1648522292","width":2130}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eScotch-Brite (TM) Surface Conditioning Belt, 72\" Length x 2\" Width, Very Fine, Blue (Pack of 1)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProduct description 3M Scotch-Brite non-woven SC-BS sanding belt uses aluminum\noxide as the abrasive material. Since this product is non-woven, grade is\ngenerally used to describe the abrasiveness; with the 00579 having a very fine\ngrade. This particular 3M sanding belt is 2 in wide by 72 in long. From the\nManufacturer The 3M™ Scotch-Brite™ Surface Conditioning Belt in very fine\ngrade is a durable belt engineered to perform detail work such as blending,\nblending corners, cleaning, contour finishing, deburring, deburring edges,\nfine finishing, flat finishing, setting the grain, stainless steel finishing,\nand attaining straightline - brushed finish on a variety of metals. Very fine\ngrade abrasive and high operating speed provides an effective means to achieve\nprofessional stainless steel finishes. The non-woven fiber construction runs\ncool, resists loading, and maintains edge durability while aluminum oxide\nabrasives provide a high cut-rate for consistent finishing performance over\nthe life of the belt. The 3M™ Scotch-Brite™ Surface Conditioning belt works\nwell to remove coarse grindlines, mill marks, or small burrs left by cutting\ntools or conventional abrasives. Thin width belts are ideal for blending and\nfinishing right angle welds on stainless steel. The Scotch-Brite Surface\nConditioning Belt uses course grade aluminum oxide abrasive. Aluminum oxide is\na popular choice among industrial professionals because of its cut-rate and\nlong life. This mineral is a tough, durable abrasive that self-fractures to\nexpose fresh cutting edges in use, whereas traditional abrasives, such as\ngarnet, quickly wear down with use. Due to its high cut-rate, hardness,\nstrength, and low heat retention, aluminum oxide mineral is widely used in\ngrinding applications in addition to sanding and finishing use. Aluminum oxide\nis suitable on a wide variety of substrates in both woodworking and\nmetalworking, including ferrous alloys. Belt sanders are used for rapid\ngrinding, sanding and finishing on a variety of surfaces. Depending on the\nmaterial being worked, sanding wheels and discs may clog, quickly making them\nless efficient, while belt sanders continue to sand without clogging because\nsmall grooves in the abrasive belt open as they go around the arc of the drive\nwheel. For more than a century, 3M has applied innovation and technology to\nimproving our customers’ lives and supporting their business goals. Today the\ncompany, from its headquarters in St. Paul, Minnesota, serves industrial and\ncommercial customers and consumers in nearly 200 countries. Abrasive Systems\nproducts, including a complete line of coated abrasives, microfinishing and\nmicroreplicated abrasives, and hardware accessories, provide the finishing\ntouch for almost any surface conditioning application. The 3M brand, across\nthousands of products, represents consistency, superior quality, and value.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSale Unit: BELT\u003c\/li\u003e\n \u003cli\u003eTrade Name: Scotch-Brite\u003c\/li\u003e\n \u003cli\u003eAbrasive Type: Non-Woven\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Scotch-Brite (TM) Surface Conditioning Belt, 72" Length x 2" Width, Very Fine, Blue (Pack of 1)

In Stock. Leaves warehouse within 2 - 3 business days

$167.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Scotch-Brite (TM) Surface Conditioning Belt, 72" Length x 2" Width, Very Fine, Blue (Pack of 1)

Product description 3M Scotch-Brite non-woven SC-BS sanding belt uses aluminum oxide as the abrasive material. Since this product is non-woven, grade is generally used to describe the abrasiveness; with the 00579 having a very fine grade. This particular 3M sanding belt is 2 in wide by 72 in long. From the Manufacturer The 3M™ Scotch-Brite™ Surface Conditioning Belt in very fine grade is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline - brushed finish on a variety of metals. Very fine grade abrasive and high operating speed provides an effective means to achieve professional stainless steel finishes. The non-woven fiber construction runs cool, resists loading, and maintains edge durability while aluminum oxide abrasives provide a high cut-rate for consistent finishing performance over the life of the belt. The 3M™ Scotch-Brite™ Surface Conditioning belt works well to remove coarse grindlines, mill marks, or small burrs left by cutting tools or conventional abrasives. Thin width belts are ideal for blending and finishing right angle welds on stainless steel. The Scotch-Brite Surface Conditioning Belt uses course grade aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel. For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface conditioning application. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Features

  • Sale Unit: BELT
  • Trade Name: Scotch-Brite
  • Abrasive Type: Non-Woven