PEI Sheet 235x235mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 5/Ender 5 Pro/CR-20/Voxelab Aquila/Voxelab Aquila C2/ 3D Printer 235x235mm（9.2x9.2in）
PEI Sheet 235x235mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 5/Ender 5 Pro/CR-20/Voxelab Aquila/Voxelab Aquila C2/ 3D Printer
PEI Magnetic Flexible Heated Bed 235x235mm, Customizable PEI Plate, Easy to Adhere and Removal.For Ender 3/ Ender 3X / Ender 3 Pro/Ender 3 Prox/Ender 5 / Ender 5 Pro.Compatible with PLA/PETG/PEEK/ABS and any other filaments. PEI Magnetic Bed Designed for easy disassembly of the model, Simply print on the surface, remove the upper magnetic surface from the lowefree your hands of tapes and glues. Magnet Platform Sticker Upper - Build surface comes with magnetic build surface, it plays an attractive role on the interaction with the front of lower. Lower - Magnetic adhesive base, it plays a fixed role. Place lower adhesive surface on top of normal build plate. Excellent Flatness The upgraded 3D printer magnetic build surface provides the most flat build surface in the market, ensuring high flatness for the bottom of print, make sure the model can be firmly attached to the surface of the print platform. Read more When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. Read more Size: 235 x 235 x 0.5MM/platePackage dimension: 11.5 x 11 x 1.2 inchFlexible, removable,high heat resistance. Note Please clean the dust with a soft cloth. Do NOT wash or clean the PEI with any water, strong chemical reagents or strong detergents.Please make sure measure it correctly before removing the adhesive and stick to the 3d printer heated bed.Recommend to an add extra 5 degrees on the both nozzle and the bed temperature to have the best printing result. Read more
- Size - 235x235mm/9.2x9.2in. Applicable models: Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro, or other hot bed size 235x235mm/9.2x9.2in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
- Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable.
- Note - If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours.