Panel Type Water Flow Meter, 0.5-5 GPM & 2-18 LPM Acrylic Liquid Flowmeter with Adjustable Knob for Water Industrial Equipment (1/2" External Thread, 1/4" Internal Thread)
Panel Type Water Flow Meter, 0.5-5 GPM & 2-18 LPM Acrylic Liquid Flowmeter with Adjustable Knob for Water Industrial Equipment (1/2" External Thread, 1/4" Internal Thread)
Feature: Panel type reading is easy, convenient and clear for you to read the values. Transparent acrylic material, light and durable, suitable for long time use. The flow rate of the meter is large enough for some measuring of big flow rate. The thread material is durable plastic, rust-resistant and has long service life. Specification: Measuring Medium: Liquid Thread Type: Inner: 1/4" Female Outer: 1/2" Male Thread Material: Plastic Body Material: Acrylic Plexiglass Float Material: Stainless Steel Fitting Material: ABS or Stainless Steel Type: Panel Type Working Pressure: ≤1.5MPa Accuracy Level: ±4% Operating Temperature: 0~60℃ Adjustable: Yes How to use [1] The flowmeter must be installed vertically, and there should be no obvious inclination. The installation height should be convenient for the reading of the float. When reading, the line of sight and the float should be level. (General standard: the optimal flow rate to be used is 50%-70% of the maximum flow rate of the flowmeter, try not to use the highest number. ) [2] In the upstream and downstream inlet and outlet of the instrument, there should be a straight pipe section with 5 times the diameter of the instrument. [3] The pressure of the fluid on the side of the flowmeter must be stable. If the fluid is too unstable, the float will fluctuate and cannot be measured correctly. A buffer or a valuer should be installed upstream of the flowmeter. [4] The flowmeter should be installed vertically, and the angle between the centerline of the flowmeter and the plumb line should not exceed 5 degrees. [5] This product is made of plexiglass and is not suitable for organic solutions and corrosive gases and liquids. Package Content: 1x Liquid Flowmeter
Product Features
- The liquid flowmeter is made of high quality acrylic plexiglass, which is transparent and can hold up to 1.5MPa pressure.
- There is a control valve on this flow meter, so the flow rate of the meter can be adjusted according to your needs.
- The liquid flow meter is panel type design with scale markings for intuitive and convenient reading, can ensure high accuracy.
- Widely used in chemical, petroleum, light industry, medicine, chemical fertilizer, food, environmental protection and scientific research departments.
- Installment: The flowmeter must be installed vertically, and there should be no obvious inclination.