Network Cable Tester, Shielded Line Finder, Rechargeable Cable Tracer with Probe Tone, Multi-Function Wire Tracer, Ethernet LAN Network Cat5/6/7 Cable Maintenance Organizer, Telephone Line
Network Cable Tester, Shielded Line Finder, Rechargeable Cable Tracer with Probe Tone, Multi-Function Wire Tracer, Ethernet LAN Network Cat5/6/7 Cable Maintenance Organizer, Telephone Line
▲【Tips】 : When you cannot switch between metric and imperial units, you need to turn off the product, then hold down the “Wire Map Test Switch” button and press the power button at the same time to turn it on. After turning it on, the screen will display “OFF”, which indicates that the calibration was successful. Then turn it off and on again, and you will be able to switch between metric and imperial units.
Product Features
- TRACING CABLES & TRACING PAIRS MODE : The tracing cables function is to quickly find the desired pair among many pairs of wires. Transmitter can be directly connected to the switch for tracing pairs. NOTE: Inserting the RJ11 alligator clips will tracing cables and wire map test simultaneously, and the transmitter will light up with four indicators
- WIRE MAP TEST MODE : The wire map test function is the detection of open circuit, short circuit, wrong pair and reverse connection of network cable
- LENGTH MEASUREMENT MODE : The length test function is to detect the length and break point detection of the network cable. Length measurement range: 2m-400m. (Note: Not measurable for less than 2m). NOTE: When measuring the length, please do not connect any device at the remote end
- RECHARGEABLE NETWORK & CABLE TESTERS : 2000mah 3.7V Polymer Lithium Battery (Transmitter:1000mah, Receiver:1000mah). Digital Signal, Anti-interference, No Noise, Power-Over-Electricity (POE) Tracing Cables, Measurable Shielding line, DC 60V Anti-burn
- SENSITIVITY ADJUSTMENT : Adjusts the sensitivity to the proper operating feel, which improves line finding accuracy
- LED LIGHT : There is an LED light on the transmitter, which can also be used in the dark environment
- 48-Month Warranty : We provide 48 months unconditional warranty and lifetime after-sales service
- Package Content : 1 x Transmitter, 1 x Receiver, 1 x Charging cable, 1 x RJ45 adaptive cable (black), 1 x Cloth bag, 1 x User Manual
- Tips : When you cannot switch between metric and imperial units, you need to turn off the product, then hold down the Wire Map Test Switch button and press the power button at the same time to turn it on. After turning it on, the screen will display OFF, which indicates that the calibration was successful. Then turn it off and on again, and you will be able to switch between metric and imperial units.