milKit Tubeless Rim Tape - 11yd (10m) Rim Strip Roll - Extra Strong Bicycle Rim Tape 21mm -25mm - 29mm - 32mm Available Widths (21mm) 21mm / 10m
milKit Tubeless Rim Tape - 11yd (10m) Rim Strip Roll - Extra Strong Bicycle Rim Tape 21mm -25mm - 29mm - 32mm Available Widths (21mm)
QUICK AND EASY CONVERSION OF YOUR RIMS TO TUBELESS Optimum mix of strength and flexibility for easy mounting. EXTRA STRONG Extra strong and reliable adhesive ensures a tight fit on your rim, making our rim tape one of the best tubeless rim tapes available. AVAILABLE FOR MOST POPULAR WIDTHS milKit tubeless bike rim tape is available in the four most popular widths – covering most rim sizes: 21mm, 25mm, 29mm, 32mm. Read more Your strong and reliable tubeless rim tape - milKit rim tape is available in the four most popular widths on 10m/11yd rolls. One role is sufficient to set up 4-5 wheels. - (!) Choose a rim tape width that matches the inner width of your rim or is slightly larger. The rim tape should cover the whole rim base and it can even cover a part of both sides. - (!) Using too narrow rim tape can lead to air leaking between rim and tape - which can be frustrating. If it is too wide it can make it difficult for the tire to sit correctly. Read more How to use milKit rim tape milKit products offer the simplest solution for tubeless installation and maintenance. We designed our rim tape to be very strong and reliable for an airtight fit, but with enough flex to make installation quick and easy. Rim tape is needed to ensure air does not escape through holes that are drilled in the rim for spokes. Choose a rim tape width that matches the inner width of your rim or is slightly larger. The rim tape should cover the whole rim base and it can even cover a part of both sides. Using too narrow rim tape can lead to air leaking between rim and tape – which can be frustrating. If it is too wide it can interfere with the tire seating correctly. For easy and effective installation: Clean rim thoroughly and ensure it is dry Install rim tape by pulling it firmly into the rim. It must be tight and ensure there are no gaps or air trapped underneath Make sure it overlaps at least 10 cm / 4 in over the valve hole, it’s better to have a longer overlap than shorter Use two layers for high pressure wheels (above 8 bar / 120 psi) Cut rim tape at a 45° angle for the best adhesion and flexibility Install milKit tubeless valves into rim: pinch just a small hole into the rim tape and push valve through tape into rim milKit Conversion Kit milKit Sealant milKit Valves milKit Booster milKit Compact
Product Features
- milKit Tubeless sealing tape - 10 metre x 21 mm