Meter 220v Digital 1-Phase 2 Wire 4p Din-Rail Electric Meter Electronic Kwh Meter(20(80)A) for kwh meter 1 fase analog kwh meter 80 amp kwh meter electric consumption metre digital kwh meter 100 digit
Meter 220v Digital 1-Phase 2 Wire 4p Din-Rail Electric Meter Electronic Kwh Meter(20(80)A) for kwh meter 1 fase analog kwh meter 80 amp kwh meter electric consumption metre digital kwh meter 100 digit
Specification: Features: 35mm standard DIN rail installation, complying with standard DIN EN50022. Six pole width (Modulus 12.5mm), complying with standard /T7121-1993. May select 5+1LCD digits display (99999.1kWh) . Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse output passive (nonpolarity), complying with standard IEC 62053-31 Standard configuration don\'t detection direction of the of load current. May select automatic detection the direction of the of load current. And instructions by an individual LED. Single direction measure single phase two wire active energy consumption. It is nothing with direction of the of load current. Complying with standard IEC 62053-21. Standard configuration short terminals cover, may select extension terminals cover, in order to to use safely. Specifications: Model: XTM75S-U Accuracy: Class 1 Voltage: 220V Current: 5(30)A,15(60)A, 20(80)A (Optional) Insulation performance: AC voltage 4kv for 1 minute,1.2/50us waveform impulse voltage 6kv Size: 10 x 7.6cm / 3.94 x 2.99in Weight: Approx. 270-277g Package included: 1 x DIN-Rail Electric Meter 1 x Manual Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Product Features
- Compatibility: This meter is suitable for measuring single-phase AC active energy with a rated frequency of 5Hz or 6Hz for fixed installation indoors. It is suitable for ambient temperature not exceeding -25C~+55C, relative humidity not more than 95%, and no air Contain corrosive gas and avoid the influence of dust, , salt spray, condensation, s, etc. for kwh meter 1 fase conta kw monofase 2 din
- Standard configuration pulse output passive (polarity) port: You can choose to add a pulse output passive (non-polar) remote port, which conforms to the standard IEC 6253-31. for 8 amp kwh meter electric meter
- Standard short terminal cover: You can choose to extend the terminal cover to use. measurement of single-phase two-wire active power consumption. The direction in which the load current flows does not matter. Comply with standard IEC 6253-21. for electric consumption metre 22v din-rail kwh meter
- The standard configuration does not detect the direction of load current: You can choose to automatically detect the direction of the load current and be indicated by a single LED. You can choose 5+1LCD digital display (99999.1kWh). for digital kwh meter mains meter