JZK PC817 4-Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Insulated Module PC 817
JZK PC817 4-Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Insulated Module PC 817
Package includes: 1 x PC817 4-channel optocoupler insulation board. Function: This module is used when it comes to insulation control and voltage conversion. It can realize 3.3V or 5V to control the interface with a voltage level of 3.6 to 24V. After the control terminal has been turned on, the controlled terminal is also switched on. The photoelectric insulation has strong anti-interference ability. It can drive high performance triodes, MOS tubes and other applications that require high voltage control, and can also directly drive 24V low power relay. If it is a pulse signal, please note that the limit of 817 is 4 kHz or less. If the control signal is greater than 4KHz, please do not use this module, it does not work properly. Module parameters: Signal voltage of the drive connection: 3.6-24V Output connection voltage connection: 3.6-30V (output current depends on the respective situation, but the maximum does not exceed 10mA, the total power is constant, voltage and current are inversely proportional) Whether the output is a high potential output or a low potential output, can be realized by a jumper cap. 4 channels 817 are independent, can achieve simultaneous control of different voltages. Plate size: 48mm x 38mm (length and width); hole spacing longitudinal side: 42mm; wide side hole spacing: 32mm
Product Features
- This module is used when isolated control and voltage conversion are required in practice.
- It can realise a 3.3 V or 5 V control interface with a voltage level of 3.6 V - 24 V. After the control terminal has been turned on, the controlled terminal is also switched on
- The optical insulation has strong anti-interference ability. The latter can control high-performance three-tubes, MOS tubes and other occasions that require high voltage control, and can also directly drive 24V low power relay to work.
- If it is a pulse signal, please note that the limit of 817 is below 4 kHz. Please do not use this module for control signals greater than 4 kHz, as it does not work properly.
- Module parameters: driver signal voltage: 3.6-24V Output voltage range: 3.6V-30V. The 4 channels of the 817 on the board are independent, which can realize simultaneous control of different voltages. Board Size: 48mm x 38mm; Hole Distance Long Side: 42mm; Wide Side Hole Spacing: 32mm