Greluma W1209 LED Digital Thermostat Controller Temperature Temp Control Switch Module Board 12 V DC -50 ~ 110 °C with Waterproof Sensor Probe (Red LED + Acrylic Housing) Pack of 2 Temperature Control Module 1-2
Greluma W1209 LED Digital Thermostat Controller Temperature Temp Control Switch Module Board 12 V DC -50 ~ 110 °C with Waterproof Sensor Probe (Red LED + Acrylic Housing) Pack of 2
Technical data: Dimensions: 48.5 x 40 x 15.8 mm. Temperature control mode: ON/OFF Temperature range: -50 - 110 °C. Resolution: when the temperature is 0.1°C, the resolution is -9.9 ~ 99.9, the other temperature segment is 1 °C. Control accuracy: 0.1 °C. Hysteresis accuracy: 0.1℃ Refresh rate: 0.5 s High temperature protection 0 - 110 °C. Supply voltage: DC 12 V. Static current: less than 35mA, attract a current less than 65mA Output voltage: DC 12 V. Output power: 20 A relay. Measurement input: NTC (10K 0.5%) waterproof sensor. Environmental requirements: -10 - 60 ℃; Humidity: 20% - 85%. Instructions for use: Connect the power supply and equipment, the measurement temperature is displayed, Press the "Set" button, press "+ or -" to set the desired temperature (long press "+ or - " to quickly increase or decrease). Press "SET" to confirm the setting and return. The controller automatically switches on/off the relay. The thermostat output is 10A relay, meet a variety of high- performance loads. LED indicator: LED off indicates that the relay is off; the lighting indicates that the relay is closed. Digital LED tubes: "LL" indicates that the sensor is open, " HH " indicates an overrange, the relay is forcibly disconnected. " --- " Displays a high temperature alarm Long press the "Set" button to access the settings of the main menu. Press "+ or - " to switch between P0 and P6, and then long press "Set" or 10 seconds without keystrokes to confirm the setting and return. Restore factory settings ----- Press and hold the "+" "-" button when turning off. When you turn on the device, "888" will be displayed to restore the factory settings. Package includes: Pack of 2 W1209 12V DC digital temperature controller board with transparent acrylic housing
Product Features
- The W1209 thermostat module controller has a sensor input, buttons, an LED indicator and a relay. It can be reprogrammed for control, timing or counting.
- Temperature measurement range: -50~110C Control accuracy: 0.1 celsius. Input Power (DC): 12V; Measurement Inputs: NTC (10K 0.5%); Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output; Capacity: 10A; Current Consumption: Static Current: 35mA; Current: 65mA.
- Electronic digital thermostat with 3 digit LED indicator, red colour, extremely bright. Operation in both heating and cooling for easy control of appliances and fixtures.
- The output is electronically controlled by a microprocessor to ensure the highest precision of the intervention and excellent resolution of the reading temperature.
- The NTC probe is waterproof and allows you to control the temperature even of liquids, allowing controlled heating or cooling. NoteThe wood laminate case is the clear plastic case. You need to carefully tear off the wood outer layer, the outer layer is very thin. (It can protect the interior to avoid scratches.) And you need to assemble and install the case yourself.