Gebildet 3pcs USB to 3pin/4pin PWM 5V USB Sleeve Fan Power Adapter Cable with USB Fan Controller Speed Controller ON/OFF Switch USB controller (1 to 1)
Gebildet 3pcs USB to 3pin/4pin PWM 5V USB Sleeve Fan Power Adapter Cable with USB Fan Controller Speed Controller ON/OFF Switch
Cable specification: Product name: USB to 3-pin / 4-pin small plug. Length: 30 cm. Cable model: 2464 22AWG. Insulation material: PVC insulation Driver model 18 x 0.10 TS Conductor material: pure copper Wire Diameter: OD 3.0mm Nominal temperature: 80°C Colour: black. Weight: 10g Interface: a small 3 pin/4 pin connector on one end of the motherboard and a USB interface on the other end. Speed controller specification: Power supply range: 4V to 12V (USB port) Output range: 3V-8V (not for 12V USB fan) Rated power: 5W (not overcharged) Note The speed controller can handle an input voltage from 4 to 12V, which does not mean it can supply a 12V power supply, the regulator can only reduce the voltage. If you want a 12V power supply, you need to supply a 12V power supply to the controller. The package includes: 6 x 3 pin/4 pin USB case fan adapter cable.
Product Features
- The starting voltage of the fan must not exceed 5V (fans with a higher start voltage will not work).
- The 12V fan works with a reduced voltage of 5V to ensure quiet operation.
- The cable is a 5V USB port to 3pin/4pin fan cable that allows you to power most case fans via a USB connection, while a 3pin/4pin power adapter cable works for case fans.
- Use: very simple. Plug the controller into the charger of your mobile phone or into the charging container, then plug the USB plug of the fan into the USB port of the controller and then adjust the large volume or small air volume by turning the adjustment knob.
- In the USB controller, you can plug a mobile phone charger, a battery charger, a computer USB port and a fan plug and then plug in the controller head! Or use the Micro USB 5.0V power supply.