DollaTek ADJ Power Module DC-DC Down Regulator 3A Adjustable 5V/12V/24V
DollaTek ADJ Power Module DC-DC Down Regulator 3A Adjustable 5V/12V/24V
Description: 1. HW-411 chip module used of high quality, with high efficiency (up to 92%), to heat up a small device, can be easily set up 3A (short). Long working hours are recommended for use with less than 2.5A current while adding wings (10W output at the top). 2. This module uses machine placement, reflow soldering and each module before shipping after two hours aging test to ensure high reliability. 3. Input voltage range: DC 3.2V-40V (input voltage must be greater than 1.5V or not increase several) 4. Output voltage range: voltage 1.25V-35V DC is infinitely adjustable, high efficiency (up to 92%), maximum output current of 3A. Note: 1. Long working hours are recommended for use in less than 2.5A current while adding a heat sink (10W output power at top); Buck module due to stable production and a minimum difference of 1.5V. 2. This module is an adjustable buck module. The module can be adjusted above the attenuation to change the output voltage. Input and output pressure is 2V; the minimum can be the output voltage of 1.25V. 3. The modules indicated above IN (negative input), IN + (positive input), OUT (negative output), OUT + (positive output), make sure you choose the right one, otherwise it may cause damage to the module. 4. This module has no output short circuit protection, an output short circuit if it extends can cause damage to the module. Package includes: 1 x DollaTek ADJ Power Module
Product Features
- 2596 chip module uses high quality
- This module uses machine placement, reflow soldering
- DC 3.2V-40V (input voltage output voltage must be higher than 1.5V or more
- Long working hours is recommended for use in less than 2.5A current
- Modules specified via IN-, IN+, OUT-, OUT+