CONFAST 1/4" x 1-1/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box) 1/4" x 1-1/4"
CONFAST 1/4" x 1-1/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)
ApplicationsThe anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Driver RequiredA 5/16" nut driver is required for driving the anchor into the base material.Diameter of Anchor The diameter of the anchor is 1/4".Length Anchor The length of the anchor is 1-1/4"Thread LengthThe length of the threads on the anchor is 1-1/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 0" to 1/4". This will ensure that the minimum embedment of 1" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".Spacing between AnchorsEach anchor must be spaced a minimum distance of 4" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
Product Features
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- SLOTTED HEX HEAD-Can be driven with a nut driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Related Products
LUORNG 100PCS 0.67 inches Stainl...
LUORNG 100PCS 0.67 inches Stainless Steel Eye Screws, Heavy Duty Screw, Eye Hooks Screw Eye Bolts Eye Hooks Screw
$88.00 AUD
LUORNG 100PCS 0.67 inches Stainless Steel Eye Screws, Heavy Duty Screw, Eye Hooks Screw Eye Bolts Eye Hooks Screw Product name: Sheep-eye self-tapping screws Product material: 304 stainless steel Dimensions: full length: 0.67''; outer diameter of the ring: 0.35''; inner diameter of the ring: 0.24'' Features: These eye screws are widely used in o...
Hard-to-Find Fastener 0149735089...
Hard-to-Find Fastener 014973508913 508913 8 x 1 Phillips Pan Sheet Metal Screws (100 Pieces), White Alloy Steel
$115.00 AUD
Hard-to-Find Fastener 014973508913 508913 8 x 1 Phillips Pan Sheet Metal Screws (100 Pieces), White We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated And...
M4-0.7 x 8mm Flanged Button Head...
M4-0.7 x 8mm Flanged Button Head Socket Cap Screws, Stainless Steel 18-8 (304), Bright Finish, Full Thread, Allen Socket Drive, Quantity 100 M4 x 8 mm (100 PCS)
$91.00 AUD
M4-0.7 x 8mm Flanged Button Head Socket Cap Screws, Stainless Steel 18-8 (304), Bright Finish, Full Thread, Allen Socket Drive, Quantity 100 Product Specification Button head screws have a low domed head with a wider bearing surface than standard heads, and they offer a finished appearance, making them an ideal choice when a neat appearance is d...
Rustark 450Pcs M3/M4/M5/M6/M8 Al...
Rustark 450Pcs M3/M4/M5/M6/M8 Allen Head Socket Hex Grub Screw Set Assortment Kit with Internal Hex Drive - 12.9 Class Black Alloy Steel
$121.00 AUD
Rustark 450Pcs M3/M4/M5/M6/M8 Allen Head Socket Hex Grub Screw Set Assortment Kit with Internal Hex Drive - 12.9 Class Black Alloy Steel Rustark 450Pcs M3/M4/M5/M6/M8 Allen Head Socket Hex Grub Screw Set Assortment Kit [Specifications]: 1.Color: Black 2.Material: 12.9 Class Alloy Steel 3.Screw Sizes: M3 M4 M5 M6 M8 4.Quantity: 450pcs, come with ...
YeeBeny Stainless Steel Screws M...
YeeBeny Stainless Steel Screws Marine Grade Boat Canvas Snaps 3/8" inch Diameter Stainless Steel, Snaps for Boat Cover, Snap Screw Stud, Made of high-Quality Materials, not Easy to corrode (24pcs)
$88.00 AUD
YeeBeny Stainless Steel Screws Marine Grade Boat Canvas Snaps 3/8" inch Diameter Stainless Steel, Snaps for Boat Cover, Snap Screw Stud, Made of high-Quality Materials, not Easy to corrode (24pcs) Made of high-quality materials: This set of universal snap screw-in studs with kit is strong, heavy and of good quality. They are strong, durable, rus...
410 Stainless Steel Thread Cutti...
410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 3/16" Length (Pack of 100)
$83.00 AUD
410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #2-56 Thread Size, 3/16" Length (Pack of 100) The 410 stainless steel thread cutting screw has a plain finish, a Type F point style, and a pan head with a Phillips drive. The type F point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, ...
The Hillman Group 2851 6 x...
The Hillman Group 2851 6 x 5/8-Inch Flat Head Antique Copper Decorative Sheet Metal Screw, 40-Pack
$84.00 AUD
The Hillman Group 2851 6 x 5/8-Inch Flat Head Antique Copper Decorative Sheet Metal Screw, 40-Pack These sheet metal screws, or tapping screws, are highly versatile and are used to attached metal, wood, fiberglass, and plastic. The sharp threads draw material together and ensure a secure hold. Sheet metal screws are fully threaded with a sharp p...
MonsterBolts - M3 x 3mm Cup...
MonsterBolts - M3 x 3mm Cup Point Set Screws, DIN 916, Stainless Steel, 10 Pack
$76.00 AUD
MonsterBolts - M3 x 3mm Cup Point Set Screws, DIN 916, Stainless Steel, 10 Pack Diameter : M3 / 3mm, Thread Size : 0.50 - UNC / Coarse Thread, Drive : M1.5 / 1.5mm Hex Key, Type : Cup Point Socket Set Screw, System of Measurement : Metric, Material : Stainless Steel Grade A2 / 18-8 / Type 304, Specifications : DIN 916 / ISO 4029 Product Featur...
#8 x 1-1/2" Bronze Star Exterior...
#8 x 1-1/2" Bronze Star Exterior Coated Wood Screw Torx/Star Drive Head (1 Pound - 196 Approx. Screw Count) - Multipurpose Exterior Coated Torx/Star Drive Wood Screws #8 x 1-1/2" (1 POUND - 196 Approx. Screws
$157.00 AUD
#8 x 1-1/2" Bronze Star Exterior Coated Wood Screw Torx/Star Drive Head (1 Pound - 196 Approx. Screw Count) - Multipurpose Exterior Coated Torx/Star Drive Wood Screws Product Features High Performance Exterior Coated Star/Torx Drive Wood Screws (1 pound (Approx. 196 screws)) Self-Countersinking Nibs & Drag Reducing Kn...
M8-1.25 x 12mm Socket Head Cap...
M8-1.25 x 12mm Socket Head Cap Screws Bolts, Allen Socket Drive, Stainless Steel 18-8 (304), Full Thread, Bright Finish, Machine Thread, 20 PCS M8 x 12mm (20 PCS)
$114.00 AUD
M8-1.25 x 12mm Socket Head Cap Screws Bolts, Allen Socket Drive, Stainless Steel 18-8 (304), Full Thread, Bright Finish, Machine Thread, 20 PCS Product Specification Socket caps have a small cylindrical head with tall vertical sides. Allen (hex socket) drive is a six-sided recess for use with an allen wrench (hex key). Thread Diameter 8 mm Threa...
HVAZI #2-56#4-40#6-32 UNC Stainl...
HVAZI #2-56#4-40#6-32 UNC Stainless Steel Internal Hex Drive Cup Point Set Screws Assortment Kit
$104.00 AUD
HVAZI #2-56#4-40#6-32 UNC Stainless Steel Internal Hex Drive Cup Point Set Screws Assortment Kit Product description: All set Screws have a hex socket,Set screws exert pressure at the tip to hold objects in place. The cup has a thin edge that digs into the contact surface for high holding power. Length listed is the overall length. Package inclu...
The Hillman Group The Hillman Gr...
The Hillman Group The Hillman Group 843 Zinc SAE Socket Set Screw 1/2-13 x 1/2 in. 8-Pack
$96.00 AUD
The Hillman Group The Hillman Group 843 Zinc SAE Socket Set Screw 1/2-13 x 1/2 in. 8-Pack A Set Screw is a type of screw generally used to secure an object within or against another object. Set screws are most often headless, meaning that the screw is fully threaded and has no head projecting past the major diameter of the screw thread. The set ...
Small Parts-0812KQPB Steel Self-...
Small Parts-0812KQPB Steel Self-Drilling Screw, Black Oxide Finish, Pan Head, Square Drive, #2 Drill Point, #8-18 Thread Size, 3/4" Length (Pack of 100)
$106.00 AUD
Small Parts-0812KQPB Steel Self-Drilling Screw, Black Oxide Finish, Pan Head, Square Drive, #2 Drill Point, #8-18 Thread Size, 3/4" Length (Pack of 100) The steel self-drilling screw with black oxide finish has a pan head and a square drive. Steel is often used in applications where strength is the primary consideration. The black oxide finish o...