{"id":7086828454068,"title":"Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches","handle":"boston-gear-nb40a-spur-gear-steel-inch-16-pitch-0-500-bore-2-625-od-0-500-face-width-40-teeth-16-inches-0-500-inches-2-625-inches","description":"\u003ch3\u003eBoston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear low carbon steel spur gear with 20-degree pressure angle (PA)\nand a diametral pitch (DP) of 16 transmits torque between parallel shafts to\nprovide rotational power to another part of a motorized system. It has a\n20-degree pressure angle for lower contact ratio between gears, resulting in\nhigher load capacity than smaller pressure angles, and a 16-diametral pitch\nfor applications requiring a balance between transferring torque and\ncontrolling changes in speed and direction of rotation with precision. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of low carbon steel (.2 percent carbon) for\napplications where the hardness and strength of higher levels of carbon are\nnot needed to transmit torque and motion. This Boston Gear spur gear is\nsuitable for use in a variety of commercial and industrial applications, such\nas construction equipment, aeronautics, conveyors, and manufacturing\nequipment, among others.Spur gears, the most common gear type, have a circular\nor cylindrical shape with teeth bordering the outer perimeter and are used for\ntransmitting rotational torque and motion between parallel rotating shafts. A\nspur gear's pressure angle (PA), diametral pitch (also called DP or pitch),\nand its material are important factors to consider when purchasing. Gears come\nin several types for use in different power transmission configurations and\nfor different applications, including bevel and miter gears (for rotating\nshafts perpendicular to each other), change gears (to increase or decrease\ntorque and speed), helical gears (for high rates of rotational speed),\ninternal gears (where one gear is nested inside the other), rack and pinion\ngears (for turning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.Boston Gear manufactures a variety of\ngear drives, variable speed drives, clutches, and the components that comprise\nthese systems including sprockets and bearings. Their manufacturing designs,\nproduction, and inspection meet International Organization for Standardization\n(ISO) standards for quality assurance. The company, founded in 1877, is\nheadquartered in Charlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision\u003c\/li\u003e\n \u003cli\u003eLow carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:19:19+11:00","created_at":"2022-03-19T05:19:19+11:00","vendor":"Boston Gear","type":"Spur Gears","tags":["auspowers_batchone"],"price":24700,"price_min":24700,"price_max":24700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335994384564,"title":"0.500 Inches \/ 0.500 Inches \/ 2.625 Inches","option1":"0.500 Inches","option2":"0.500 Inches","option3":"2.625 Inches","sku":"B0026H3PYI","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches - 0.500 Inches \/ 0.500 Inches \/ 2.625 Inches","public_title":"0.500 Inches \/ 0.500 Inches \/ 2.625 Inches","options":["0.500 Inches","0.500 Inches","2.625 Inches"],"price":24700,"weight":476,"compare_at_price":null,"inventory_management":null,"barcode":"781711102442","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023","\/\/auspowers.com\/cdn\/shop\/products\/612ek1J3OrL.jpg?v=1647627559","\/\/auspowers.com\/cdn\/shop\/products\/81kpuxuFp1L.jpg?v=1647627559"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023","options":["Bore Diameter String","Face Width","Item Diameter String"],"media":[{"alt":"[Australia - AusPower] - Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches ","id":25352058798260,"position":1,"preview_image":{"aspect_ratio":1.069,"height":1123,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023"},"aspect_ratio":1.069,"height":1123,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023","width":1200},{"alt":"[Australia - AusPower] - Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches ","id":25207455056052,"position":2,"preview_image":{"aspect_ratio":0.34,"height":1496,"width":508,"src":"\/\/auspowers.com\/cdn\/shop\/products\/612ek1J3OrL.jpg?v=1647627559"},"aspect_ratio":0.34,"height":1496,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/612ek1J3OrL.jpg?v=1647627559","width":508},{"alt":"[Australia - AusPower] - Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches ","id":25207455088820,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1648,"width":1648,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81kpuxuFp1L.jpg?v=1647627559"},"aspect_ratio":1.0,"height":1648,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81kpuxuFp1L.jpg?v=1647627559","width":1648}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBoston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear low carbon steel spur gear with 20-degree pressure angle (PA)\nand a diametral pitch (DP) of 16 transmits torque between parallel shafts to\nprovide rotational power to another part of a motorized system. It has a\n20-degree pressure angle for lower contact ratio between gears, resulting in\nhigher load capacity than smaller pressure angles, and a 16-diametral pitch\nfor applications requiring a balance between transferring torque and\ncontrolling changes in speed and direction of rotation with precision. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of low carbon steel (.2 percent carbon) for\napplications where the hardness and strength of higher levels of carbon are\nnot needed to transmit torque and motion. This Boston Gear spur gear is\nsuitable for use in a variety of commercial and industrial applications, such\nas construction equipment, aeronautics, conveyors, and manufacturing\nequipment, among others.Spur gears, the most common gear type, have a circular\nor cylindrical shape with teeth bordering the outer perimeter and are used for\ntransmitting rotational torque and motion between parallel rotating shafts. A\nspur gear's pressure angle (PA), diametral pitch (also called DP or pitch),\nand its material are important factors to consider when purchasing. Gears come\nin several types for use in different power transmission configurations and\nfor different applications, including bevel and miter gears (for rotating\nshafts perpendicular to each other), change gears (to increase or decrease\ntorque and speed), helical gears (for high rates of rotational speed),\ninternal gears (where one gear is nested inside the other), rack and pinion\ngears (for turning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.Boston Gear manufactures a variety of\ngear drives, variable speed drives, clutches, and the components that comprise\nthese systems including sprockets and bearings. Their manufacturing designs,\nproduction, and inspection meet International Organization for Standardization\n(ISO) standards for quality assurance. The company, founded in 1877, is\nheadquartered in Charlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision\u003c\/li\u003e\n \u003cli\u003eLow carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500" Bore, 2.625" OD, 0.500" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches

In Stock. Leaves warehouse within 2 - 3 business days

$247.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500" Bore, 2.625" OD, 0.500" Face Width, 40 Teeth

The Boston Gear low carbon steel spur gear with 20-degree pressure angle (PA) and a diametral pitch (DP) of 16 transmits torque between parallel shafts to provide rotational power to another part of a motorized system. It has a 20-degree pressure angle for lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles, and a 16-diametral pitch for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision. This spur gear, which can mesh only with spur gears that have the same pressure angle and diametral pitch, is made of low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion. This Boston Gear spur gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.Spur gears, the most common gear type, have a circular or cylindrical shape with teeth bordering the outer perimeter and are used for transmitting rotational torque and motion between parallel rotating shafts. A spur gear's pressure angle (PA), diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including bevel and miter gears (for rotating shafts perpendicular to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.Boston Gear manufactures a variety of gear drives, variable speed drives, clutches, and the components that comprise these systems including sprockets and bearings. Their manufacturing designs, production, and inspection meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1877, is headquartered in Charlotte, NC.

Product Features

  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion

Related Products