Beduan Push to Connect Air Fitting, 5/32 inch or 4mm Tube OD Pneumatic Tee Union Fitting Push Lock(Pack of 10)
Beduan Push to Connect Air Fitting, 5/32 inch or 4mm Tube OD Pneumatic Tee Union Fitting Push Lock(Pack of 10)
Product ParameterSize:4mm or 5/32" ODShape: T ShapeMaterial: PlasticWorking Temperature:32~140°FFluid Admitted: AirMax Working Pressure: 0~145PsiApplicable Tube:PU/PA/FEP/PFA Installation Method1. Before installation, make sure that the cutting surface of the tubing is vertical, there is no scar around the tube and the tube is not oval. 2. When inserting the connector, it must be inserted at the bottom of the connector. If the tube is not inserted in the end, it may cause air leakage. 3: After the tube is connected and installed, pull the tube to make sure that the tube cannot be pulled out.4: When removing the air tube, press the connector clamp into the tube with thumb, and gently pull out the pneumatic tube with force5: After installation, The Tube Can Rotate 360° to adjust the connector direction.6: After repeatedly pulling out the pneumatic tube.The top frayed part should be cut off.Continue to use after trim.
Product Features
- Type: Push in fittings, T-Type. Tube size: 4mm tube OD
- Body Material: Plastic (PET). Applicable Tube: PU/PE/PA/PE/PVC
- Pressure Range: 0-145Psi (0-1Mpa). Max Pressure: 217Psi (1.5Mpa). Temperature Range: 0-60C | 32~140F.
- Fluid Admitted: Air Vacuum Water (no freezing).
- Easy to install, just need one step to finish installation. Round O-Rings: It offers a 360 rotation, even after the installation of tubing, 360 rotation could operate though.