{"id":7085153517748,"title":"Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter","handle":"authentic-capricorn-bowden-ptfe-tubing-xs-series-1-meter-for-1-75mm-filament-with-ptfe-teflon-tube-cutter-and-2x-pc4-m6-extruder-fitting-and-2x-pc4-m10-hotend-fitting-capricorn-1m-w-fittings-w-cutter","description":"\u003ch3\u003eAuthentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProduct description: Capricorn Premium XS bowden Tubing is\nenhanced with a proprietary blend of high performance additives. It was\ndeveloped specifically for 1.75mm filament with an extremely precise internal\ndiameter. When printing flexible filaments in a bowden system, the inside\ndiameter of bowden liner is one of the critical feature for the successful\nprint. Capricorn Premium XS Bowden imported Teflon tube, which is specially\ndeveloped for 1.75mm consumables, has a very precise inner diameter. The shape\nand inner diameter of the height are consistent, the diameter is consistent\nand perfectly round, to ensure smooth lubrication of the wire, the inner\ndiameter of 1.9mm is suitable for large and uniform filaments Made of PTFE\nresin imported from Japan, the most slippery substance known to mankind is\nslightly softer than ordinary PTFE, more flexible, heat-resistant, moisture-\nresistant, non-sticky on the surface, wear-resistant and corrosion-\nresistant.Makes the inner wall extremely smooth, and the extrusion efficiency\nis faster and better High-quality accessories, strong applicability Creative\n3D selected imported Teflon tubes, high quality, low loss rate, suitable for\nall models of Creative 3D Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAuthentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing.\u003c\/li\u003e\n \u003cli\u003eBest Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner \u0026amp; outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.\u003c\/li\u003e\n \u003cli\u003eAdvanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260C.\u003c\/li\u003e\n \u003cli\u003ePerfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.\u003c\/li\u003e\n \u003cli\u003eSpecifications: 1M Capricorn Bowden PTFE Tubing (1.95mm 0.05mm inner diameter, 2mm outer diameter). Reduces the \"wiggle room\" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-17T16:34:12+11:00","created_at":"2022-03-17T16:34:12+11:00","vendor":"Mefine","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":9400,"price_min":9400,"price_max":9400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41331646496948,"title":"Capricorn 1M w\/ Fittings w\/ Cutter","option1":"Capricorn 1M w\/ Fittings w\/ Cutter","option2":null,"option3":null,"sku":"B08BHVWNWK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter - Capricorn 1M w\/ Fittings w\/ Cutter","public_title":"Capricorn 1M w\/ Fittings w\/ Cutter","options":["Capricorn 1M w\/ Fittings w\/ Cutter"],"price":9400,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"0778992842792","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08BHVWNWK.jpg?v=1648523766","\/\/auspowers.com\/cdn\/shop\/products\/51zkoK_b53L.jpg?v=1647495252","\/\/auspowers.com\/cdn\/shop\/products\/61qees9zBiL.jpg?v=1647495252","\/\/auspowers.com\/cdn\/shop\/products\/61IgGadgVML.jpg?v=1647495252","\/\/auspowers.com\/cdn\/shop\/products\/511ivQ3ACqL.jpg?v=1647495252","\/\/auspowers.com\/cdn\/shop\/products\/61UNyVyVE_L.jpg?v=1647495252","\/\/auspowers.com\/cdn\/shop\/products\/61cUN0f6ptL.jpg?v=1647495252","\/\/auspowers.com\/cdn\/shop\/products\/518DOuV3XPL.jpg?v=1647495252"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08BHVWNWK.jpg?v=1648523766","options":["Size"],"media":[{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25341179658420,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08BHVWNWK.jpg?v=1648523766"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08BHVWNWK.jpg?v=1648523766","width":1000},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431271092,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51zkoK_b53L.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51zkoK_b53L.jpg?v=1647495252","width":1000},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431303860,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61qees9zBiL.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61qees9zBiL.jpg?v=1647495252","width":1200},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431336628,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61IgGadgVML.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61IgGadgVML.jpg?v=1647495252","width":1200},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431369396,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/511ivQ3ACqL.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/511ivQ3ACqL.jpg?v=1647495252","width":1000},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431402164,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UNyVyVE_L.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UNyVyVE_L.jpg?v=1647495252","width":1000},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431434932,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61cUN0f6ptL.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61cUN0f6ptL.jpg?v=1647495252","width":1200},{"alt":"[Australia - AusPower] - Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w\/ Fittings w\/ Cutter ","id":25186431467700,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/518DOuV3XPL.jpg?v=1647495252"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/518DOuV3XPL.jpg?v=1647495252","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eAuthentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eProduct description: Capricorn Premium XS bowden Tubing is\nenhanced with a proprietary blend of high performance additives. It was\ndeveloped specifically for 1.75mm filament with an extremely precise internal\ndiameter. When printing flexible filaments in a bowden system, the inside\ndiameter of bowden liner is one of the critical feature for the successful\nprint. Capricorn Premium XS Bowden imported Teflon tube, which is specially\ndeveloped for 1.75mm consumables, has a very precise inner diameter. The shape\nand inner diameter of the height are consistent, the diameter is consistent\nand perfectly round, to ensure smooth lubrication of the wire, the inner\ndiameter of 1.9mm is suitable for large and uniform filaments Made of PTFE\nresin imported from Japan, the most slippery substance known to mankind is\nslightly softer than ordinary PTFE, more flexible, heat-resistant, moisture-\nresistant, non-sticky on the surface, wear-resistant and corrosion-\nresistant.Makes the inner wall extremely smooth, and the extrusion efficiency\nis faster and better High-quality accessories, strong applicability Creative\n3D selected imported Teflon tubes, high quality, low loss rate, suitable for\nall models of Creative 3D Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAuthentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing.\u003c\/li\u003e\n \u003cli\u003eBest Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner \u0026amp; outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.\u003c\/li\u003e\n \u003cli\u003eAdvanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260C.\u003c\/li\u003e\n \u003cli\u003ePerfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.\u003c\/li\u003e\n \u003cli\u003eSpecifications: 1M Capricorn Bowden PTFE Tubing (1.95mm 0.05mm inner diameter, 2mm outer diameter). Reduces the \"wiggle room\" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting Capricorn 1M w/ Fittings w/ Cutter

In Stock. Leaves warehouse within 2 - 3 business days

$94.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

Product description: Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print. Capricorn Premium XS Bowden imported Teflon tube, which is specially developed for 1.75mm consumables, has a very precise inner diameter. The shape and inner diameter of the height are consistent, the diameter is consistent and perfectly round, to ensure smooth lubrication of the wire, the inner diameter of 1.9mm is suitable for large and uniform filaments Made of PTFE resin imported from Japan, the most slippery substance known to mankind is slightly softer than ordinary PTFE, more flexible, heat-resistant, moisture- resistant, non-sticky on the surface, wear-resistant and corrosion- resistant.Makes the inner wall extremely smooth, and the extrusion efficiency is faster and better High-quality accessories, strong applicability Creative 3D selected imported Teflon tubes, high quality, low loss rate, suitable for all models of Creative 3D Read more

Product Features

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing.
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260C.
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • Specifications: 1M Capricorn Bowden PTFE Tubing (1.95mm 0.05mm inner diameter, 2mm outer diameter). Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.

Related Products