Ass Savers Speed Mullet Clip On Front Mudguard/Fender, Regular for 23-47mm Tires, Universal Fit for All Bikes, Cable Routing, Single 2-in-1 Velcro Strap, Easy Mounting Within Seconds
Ass Savers Speed Mullet Clip On Front Mudguard/Fender, Regular for 23-47mm Tires, Universal Fit for All Bikes, Cable Routing, Single 2-in-1 Velcro Strap, Easy Mounting Within Seconds
Ass Savers Speed Mullet can be installed on any bike within seconds without requiring any tools. This front mudguard will protect bikers' feet from water splashes. The mudguard can also be fitted to offer drive train protection. Speed Mullet is designed in such a way that it will fit into big frames or thin frames, with angle adjustment for any bike. Fender has two shallow channels to allow for cable routing between frame and the mudguard. Comes with a longer strap for all downtube sizes. Speed Mullet comes with two stabilizer tabs to ensure secure fit on all kinds of trails.IMPORTANT NOTE: Do not use Speed Mullet in case of uncovered cables for the rear brake. Make sure that the downtube brake cable has housing. Before each ride, it is advised to check for steering clearance and the brake function for safety.SPECS:Measures: 390x113 mm.Weight: 30 g.Material: 0.8 mm PP (Polypropylene)
Product Features
- UNIVERSAL FIT: Speed Mullet is designed to keep your feet dry on wet roads. Now comes with a longer strap to work for all downtubes. Speed Mullet does it job regardless of where you are riding, does not matter if it is gnarl gravel rides, or leisure city or commuter ride. Speed Mullet can be mounted quickly within seconds to any frame or cable using the 2-in-1 velcro strap. The mullet can be mounted on fat carbon frames or thin steel frames with no hassles.
- STABILITY: Speed Mullet design has two stability tabs that folds under the velcro strap to ensure that the mullet stays in place even on the most adventurous trails. These tabs also ensure proper angle on all bike frames.
- CABLE MANAGEMENT: Innovative design has two shallow channels formed by three silicone bumpers and specific strap routing, to let cables pass through between the frame and the mudguard.
- MOUNTING TIPS: Fold the outer edges of the speed mullet at 90 degrees so that they are facing forward and place the mudguard as close to the wheel as possible with enough clearance for steering. This ensures maximum feet protection. For optimum drivetrain protection, fold the outer edges slightly and place the mullet further down, closer to the chainring. Measures: 390x113 mm. Weight: 30 g. Material: 0.8 mm PP (Polypropylene)
- IMPORTANT NOTE: Speed Mullet should not be used if there are uncovered cables for rare brakes. Please ensure that there is housing for the downward brake cable if you are using speed mullet. Also check drivetrain clearance and brake protection before each ride.