ANMBEST 10PCS 12V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino 12V Relay 1 Channel
ANMBEST 10PCS 12V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
The relay comes with 1 single channel 12V activation relay, ready to control 250VAC at 10A. Extra isolation with opto-coupler at the front end of control, and the activation logic for relay is configureable via a mini jumper. Technical Specifications: Channel: 1 channel Working Voltage: DC 12V Normally Open Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC Quiescent Current: 5mA Maximum Current: 80mA Trigger Current: 2 - 5mA Trigger Voltage(Low): 0 - 4V Trigger Voltage(High): 4.5 - 12V Insulation resistance: 100MΩ (500VDC) Action time: less than 10ms Release time: less than 5ms Power indicator: Green Relay status indicator: Red Module Size: 51mmX25.5mmX18.5mm /2.07X1.01X0.73inch(LWH) High/Low Level Trigger: 1. Low level trigger when jumper and L short circuit; 2. High level trigger when jumper and H short circuit. Package includes: 10 x One Channel 12V Relay Module with Optocoupler Module Input Interface: DC+:connect to power positive (according to the relay voltage range)DC-: connect to power negativeIN: relay module trigger pin (high or low level trigger Optional) Relay Output: Normally Opened (NO) : normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on;Common pin (COM) : Common pin of the relay;Normally closed (NC) : normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on. Read more
Product Features
- It is 1 Channel Isolated 12V 10A Relay Module, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.