ALMOCN 2PCS W1209 DC Digital Temperature Controller Board 12V with Case, Blue Digital Display Thermostat -50-110°C Electronic Temperature Temp Control Module Switch Waterproof 2Pcs Blue
ALMOCN 2PCS W1209 DC Digital Temperature Controller Board 12V with Case, Blue Digital Display Thermostat -50-110°C Electronic Temperature Temp Control Module Switch Waterproof
Specification : Model: W1209 Temperature Control Range: -50 ~ 110℃ Measurement Accuracy: 0.1℃ Control Accuracy: 0.1℃ Resolution: When temperature is 0.1 degree, the resolution is 9.9~99.9, other temperature segment is 1 degree. Refresh Rate: 0.5 ″ Input Power (DC): 12V Measuring Inputs: NTC (10K 0.5%) Waterproof Sensor: 30 CM Output: 1 Channel Relay, 10A Power Consumption:Static Current: <35mA;Current: <65mA Environmental Requirements:Temperature: -10 ~ 60℃;Humidity: 20~85% Transparent case size: 48mm x 40mm x 14mm Parameter: P0 :Cooling / Heating; Range: C/H; Default: C; P1 :Hysteresis Setting; Range:0.1-15; Default: 2; P2 :Highest Setting Limit; Range:110; Default: 110; P3: Lowest setting Limit; Range:-50; Default: -50; P4 :Temperature Correction; Range:-7~7℃; Default: 0℃; P5: Delay Start Time; Range:0-10 Minute; Default: 0; P6: High Temperature Alarm; Range:0-110; Default: Off When the Thermostat is power off, long press "- or +", you can restore the factory settings Instructions for use: Connect the power supply and equipment, the measuring temperature is displayed, press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease), press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF. the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off; Lighting, indicates the relay is closed. Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P6, then long press "SET" or 10 seconds without keystrokes to confirm the setting and return. Package Included: 2 x Temperature Controller Module 2 x Transparent Plastic Case
Product Features
- The W1209 Digital Temperature Controller with a 3-digit LED display, extremely bright.
- Temperature Measurement Range: -50~110C. Control Precision: 0.1 celsius.
- Embedded CPU chip (MCU), more intelligent, lower power consumption.
- NTC10K waterproof probe is equipped for convenient usage. The NTC probe is allows to control the temperature even of fluids, allowing the controlled heated or cooling.
- The Clear case for thermostat module can be fixed in the acrylic case perfectly and be protected in a good condition.