ALAMSCN Robot Motor Kit DC Motor 3-6V Gear TT Motor with Tire Wheel + L293D Motor Drive Controller Motor Control Expansion Board for Arduino Smart Car
ALAMSCN Robot Motor Kit DC Motor 3-6V Gear TT Motor with Tire Wheel + L293D Motor Drive Controller Motor Control Expansion Board for Arduino Smart Car
Descriptions: L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what's known as a type of H-Bridge. You can match any combination: Drive four DC motors and two steering gears Drive two DC motors and one stepper motor and two steering gears Drive two stepping motors and two steering gears Features: 1. to 4 bidirectional DC motors and 4 PWM speed controllers (approximately 0.5% resolution). 2. Up to 2 stepper motor forward and reverse control, single / double step control, staggered or micro-step and rotation angle control. 3. 4-way H-bridge: The L293D chip provides 0.6A (peak 1.2A) current per bridge with thermal shutdown protection, 4.5V to 36V. 4. The pull-down resistor ensures that the motor remains stopped at power-up. 5. Large terminal blocks make wiring easier (10-22AWG) and power 6. With reset button. 7. 2 large terminal external power terminals, to ensure logic and motor drive power separation. 8. Download Easy to use software library for rapid project development. Application: for Arduino beginners, for Arduino experimental equipment platform, for Arduino interactive electronics, for Arduino robots, etc. Package Included: 1 L293D Motor Driver Shield 4 DC Motors 4 Wheels 1 20pin Jumper Cables Male to Male 20cm 1 20pin Jumper Cables Female to Female 20cm 1 20pin Jumper Cables Male to Female 20cm
Product Features
- Multiple functions, convenient operation, powerful driver library support and function updates.
- It can drive 4 DC motors or 2 stepper motors while also driving 2 servos, support the latest for Arduino UNO and for Arduino Mega 2560.
- Come with 4 DC motors, 4 Wheels and a set of DuPont cables (20pin male to male/20pin female to female/20pin male to female)
- Convenient for enthusiasts to develop quickly based on Arduino.
- NOTE: I/O occupies more. When driving four motors at the same time (compared to the Arduino version with less I/O), low power.