AITRIP 2 Pieces ESP32-CAM WiFi Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Compatible with Arduino IDE Arduino Raspberry Pi 2 Pieces ESP32-CAM-MB
AITRIP 2 Pieces ESP32-CAM WiFi Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Compatible with Arduino IDE Arduino Raspberry Pi
Specifications1 : Working voltage: 4.75-5.25V SPIFlash: Default 32Mbit RAM: Internal 520KB + external 8MB PSRAM Wi-Fi: 802.11b/g/n/e/i Bluetooth: Bluetooth 4.2BR/EDR and BLE standard Support interface (2Mbps): UART, SPI, I2C, PWM Support TF card: maximum support 4G IO port: 9 Serial port rate: default 115200bps Spectrum range: 2400 ~2483.5MHz Antenna form: onboard PCB antenna, gain 2dBi Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE Specifications2: Using low-power dual-core 32-bit CPU, which can be used as an application processor. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS Built-in 520 KB SRAM, external 8MB PSRAM Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces Support OV2640 and OV7670 cameras, built-in flash Support picture WiFI upload Support multiple sleep modes. Lwip and FreeRTOS embedded Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click network configuration Support secondary development Package Included: 2pcsESP32-CAM-MB Camera Module
Product Features
- A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz.
- ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
- Wide range of use: ESP-32CAM can be widely applied in various IoT applications; It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless, wireless positioning system signals and other IoT applications; It is an proper solution for IoT applications
- compliant with WiFi 802.11b/g/n/e/i and 4.2 standards, it can be applied as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices