6.08 Inches Mono LCD Screen for Anycubic Photon Mono/Mono SE, 2K Light Curing Print Screen Replacement, with 1620x2560 Resolution (Interface Type: MIPI-4 Lane/03) Interface Type: MIPI-4 Lane/03
6.08 Inches Mono LCD Screen for Anycubic Photon Mono/Mono SE, 2K Light Curing Print Screen Replacement, with 1620x2560 Resolution (Interface Type: MIPI-4 Lane/03)
This lcd screen can use for Anycubic Photon MONO. For MONO SE you need this screen to work with the original adaptor. Shipping List: 1 X LCD Screen 1 X Tape Please note: All the brands we mentioned above just show products compatibility, not worked as trade mark use. The LCD for Anycubic Photon MONO/Anycubic Photon MONO SE Specifications: Item Type: LCD Screen Interface Type: MIPI-4 Lane/03 Panel Size: 6.08 inch Display Color: Monochrome Resolution: 1620 X 2560 Read more Before you install the screen, you need to remove the protective film on the front and back of the screen. Please ensure that the wiring to the motherboard is not loose. After confirming that there are no loose wires and securing the lcd screen, the entire installation is complete when the screen lights up properly. Read more The mono screen longer lifespan than RGB screen. The mono screen three times higher light transmitance than RGB screen. The mono screen faster printing than RGB screen. Read more FEP Release Film LCD Screen for Anycubic Photon Mono X PJ LCD Screen for Anycubic Photon Mono X LCD for Anycubic Photon S/Elegoo Mars Pro LCD for Anycubic Photon/Elegoo Mars ✓ ✓ ✓ ✓ ✓
Product Features
- Compatible Printers: Compatible with Anycubic Photon Mono/Mono SE LCD resin 3d printer.
- High Resolution: 6.08 inches mono LCD with 1620x2560 high resolution ensures your printing with high precision.
- High Performance: Compared with ordinary RGB LCD 3D printers, it has longer life span, faster printing speed, higher printing efficiency and more stable performance.
- Easy Installation: 2K LCD Screen installation are straightforward and easy.
- Customer Support: We provide 24-hour customer service,your satisfaction is our greatest pursuit. If the product is damaged when it arrives, or if you have any other questions, please contact us, we will provide you with a satisfactory solution.
Related Products
PEMENOL 5PCS OLED Display Module...
PEMENOL 5PCS OLED Display Module for Arduino, 0.96 Inch I2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Raspberry Pi and ESP8266 - White Light
$134.00 AUD
PEMENOL 5PCS OLED Display Module for Arduino, 0.96 Inch I2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Raspberry Pi and ESP8266 - White Light PEMENOL is a franchised store that has long been engaged in the wholesale and retail business of electronic related products. PEMENOL 5PCS OLED Display Module can be widely used wi...
uxcell Common Cathode 10 Pin 1...
uxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55" Red LED Display Digital Tube 10pcs
$91.00 AUD
uxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55" Red LED Display Digital Tube 10pcs Used widely in home appliances, instruments, accessories, etc.specificationsProduct Name : LED Digital Display TubeType : Common CathodeModel : 5611AHCommon Cathode : 3-8Digital Display : 1 DigitDigital Number : 1 Bit 7 SegmentEmitted Col...
HiLetgo 1602 LCD Keypad Shield 1...
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot
$87.00 AUD
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot 1602 LCD module read and write operations, screen and cursor operations are programmed to achieve through the instructions. Note: 1- High level, 0 -Low level) Instruction1: clear display, instruction 01H, cursor reset to address 0...
HiLetgo 2pcs MAX7219 8-Digital S...
HiLetgo 2pcs MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32
$83.00 AUD
HiLetgo 2pcs MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32 Features: MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 digit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD ...
HiLetgo 2004 20X4 LCD Display LC...
HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi
$93.00 AUD
HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi Features: IIC/I2C interface was developed to reduce the IO port usage on Arduino board. Old 1602 screen requires 7 IO ports but this module uses only two. Much needed control panel IO ports can be used to add some sensors, SD ca...
6.08 Inches Monochrome 2K LCD Sc...
6.08 Inches Monochrome 2K LCD Screen for ELEGOO Mars 2/Mars 2 Pro/Voxelab Proxima Resin 3D Printers, 1620x2560 Resolution Without Touch Panel 6.08'' (with Glass)
$243.00 AUD
6.08 Inches Monochrome 2K LCD Screen for ELEGOO Mars 2/Mars 2 Pro/Voxelab Proxima Resin 3D Printers, 1620x2560 Resolution Without Touch Panel 6.08 inch Product Features
MakerFocus TFT LCD Screen Displa...
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240 * 240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY
$104.00 AUD
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240 * 240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously c...
diymore 5 Packs Red/Green/White/...
diymore 5 Packs Red/Green/White/Yellow/Blue Colors TM1637 0.56" LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Dots Module Serial Driver Board(5 Colors) 5 Colors
$113.00 AUD
diymore 5 Packs Red/Green/White/Yellow/Blue Colors TM1637 0.56" LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Dots Module Serial Driver Board(5 Colors) Package Included: 5pcs x TM1637 7-Segment 4-Digit 0.56" LED Display Colon Module Clock Digital Tube Serial Driver Board (5 colors) Specification: This module is a 12 foot with c...
HiLetgo 2pcs 0.36" 4-Digit Tube ...
HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3
$83.00 AUD
HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3 Description: The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver TM1637; only two signal lines can make the MCU control 4 bits 8 digital tube. Parameter: Supply vol...
HiLetgo 3.5" TFT LCD Display ILI...
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
$126.00 AUD
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560 Features: 1.Brand new and high quality. 2.Module Size: 96.6 (w) 60.3 (L) (mm) 3.Effective display size: 73.44 48.98mm 4.Screen size: 3.5 inches 5.Backlight Type: bright white 6LED 6.Screen resolution: 480 320 (Pixel) 7.Screen type: TFT 8.Module power supply: 5V ...
HiLetgo 1.3" SPI 128x64 SSH1106 ...
HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32
$91.00 AUD
HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32 Product Features 1.3" mini OLED display screen with 128X64 resoluction and SSH1106 chipset Ultra-low power consumption: full screen lit 0.08w Four fixed bolt holes for easy installation Interface Type:SPI(Can be changed to ...
HiLetgo ILI9341 2.8" SPI TFT LCD...
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
$119.00 AUD
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32 100% brand new and high qualityType: touch panelSize:2.8" SPI SerialDisplay area:36.72(W)X48.96(H)mmSize:8.5 x 4.8cmDriver element: a-Si TFT active matrixPixel arrangement: RGB vertical stripeDriver IC: ILI9341Backlight: White LEDViewing Direction: 6 o'clockColor...
DC 3.3V 1.28'' LCD Display Modul...
DC 3.3V 1.28'' LCD Display Module, RGB 240x240 GC9A01 Driver SPI Interface 240x240 Resolution for Instrument Display, Mobile Devices and Display Equipment
$127.00 AUD
DC 3.3V 1.28'' LCD Display Module, RGB 240x240 GC9A01 Driver SPI Interface 240x240 Resolution for Instrument Display, Mobile Devices and Display Equipment welcome to my store , Hope you have a pleasant shopping trip! Description: It is a 1.28 inch 240240 IPS LCD Display Screen.It uses IPS color display screen and the display effect is more vivid...