5pcs LM393 Photoelectric Sensor H2010 Photoelectric Infrared Sensor with Opposite Count Motor Speed Sensor Module with Encoder Cable
5pcs LM393 Photoelectric Sensor H2010 Photoelectric Infrared Sensor with Opposite Count Motor Speed Sensor Module with Encoder Cable
Specification: 1.The two circular holes of the PCB (the distance from the point to the center of the point) are 15mm, and the aperture is 3mm 2.Slot type optocoupler slot width 10mm Main chip: LM393, slot optocoupler H2010, through-beam infrared head. 4. Working voltage: DC 5 V. Features: 1.With signal output indication. 2.Single-channel signal output. Output high level (LED light off) when there is an obstruction, and output low level (LED light on) when there is no obstruction. 4.The sensitivity is not adjustable. 5. It can be used for workpiece counting and motor speed measurement. 6. The circuit board output switch. Package includes: 5 x correlation photoelectric sensors. 5 x encoders. 15 x Male and female cable
Product Features
- What it does: This module can be used for workpiece counting and motor speed measurement.
- Features: Output a high level (LED light off) when there is an obstacle, output a low level (LED light on) when there is no obstacle.
- The output shape: single channel signal output; optical coupling slot width: 10 mm.
- Size: 2.3 x 2 x 1.8 cm / 0.91 x 0.79 x 0.71 inches; the two circular holes of the circuit board (the distance from the tip to the centre of the tip) are 15 mm and the opening is 3 mm.
- Chip: LM393; Groove Optocoupler: H2010; Working Voltage: DC 5V
- Pin definition: VCC is connected to the positive pole of the power supply, GND is connected to the negative pole of the power supply, OUT switch signal output.
- Products included: 5 x photoelectric correlation sensor; 5 x encoders; 15 x male and female cables.