5pcs GY-APDS9930-LLC APDS-9930 LLC Ambient Light Infrared LED Proximity Sensor
5pcs GY-APDS9930-LLC APDS-9930 LLC Ambient Light Infrared LED Proximity Sensor
X5pcs GY-APDS9930-LLC APDS-9930 LLC Ambient Light Infrared LED Proximity SensorThe APDS-9930 provides an I2C interface-compatible Ambient Light Sensor (ALS) and a proximity sensor with an infrared LED, where the ambient light sensor uses a dual photodiode to approximate 0.01 lux illumination. The performance of the human eye visual response provides the high sensitivity that allows the device to operate after dark glass. The proximity sensor is fully calibrated for 100 mm object detection, eliminating factory calibration requirements for terminal and subassemblies. From the bright sunlight to the dark room, the proximity detection function works well. The addition of micro- optical lenses to the module provides high efficiency of infrared energy transmission and reception, can reduce the overall power consumption. In addition, the internal state machine allows the device to enter the low power mode, bringing very low average power consumption.Features: Integrated optics for ALS, IR LEDs and proximity detectors Ambient Light Sensing (ALS, Ambient Light Sensing) • Approximate visual response to the human eye Programmable interrupt function with upper and lower thresholds Up to 16-bit resolution Dark glass after the operation of the high sensitivity 0.01lux low lumen performance Proximity detection Fully calibrated to 100 mm detection Integrated infrared LED and synchronous LED driver Eliminate plant calibration for proximity sensors Programmable wait timer with power consumption - 90μA typical The programmable range is 2.7 milliseconds to greater than 8 seconds I2C interface compatible Up to 400kHz (I2C fast mode) Sleep mode power - 2.2μA typical Small package 3.94 (long) x 2.36 (W) x 1.35 (H) mm Packet Contains:5pcs x APDS-9930 LLC Ambient Light Infrared LED Proximity Sensor