4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro
4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro
Specifications: Interface: Step/Dir Configuration: CFG Pins or UART Native Microsteps: up to 1/256 MicroPlyer Microsteps: 1/256 Logic Voltage (VIO): 3-5V Motor Voltage (VM): 4.75-36V Motor Phase Current max: 1.2A RMS, 2.0A Peak. Therefore, the reference voltage of the driver module should not exceed 1V. At the same time, the driver module must be dissipated, otherwise it will affect the life of the driver module. Note: TMC2208 driver needs extra fan to cool it, otherwise the high temperature may destroy it. Do not connect the motor when measuring the voltage, otherwise it is easy to burn the driver. Power should be connected when measuring voltage, do not just connect USB power supply. Package Includes: 4 X TMC2208 Driver 4 X Heat Sink 1 X Screwdriver
Product Features
- TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
- The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
- Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
- With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
- The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).
Related Products
STEPPERONLINE High Torque Nema 1...
![[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor](http://auspowers.com/cdn/shop/products/B00PNEQUZ2_1024x.jpg?v=1648523049)
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor
$171.00 AUD
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part Number: 17HS24-2104S Motor Type:...
BZ 3D GT2 Timing Belt 6mm...
![[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M](http://auspowers.com/cdn/shop/products/B07WRBRDBZ_1024x.jpg?v=1648582620)
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M
$136.00 AUD
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service! Product Features Upg...
Official Creality New Upgrade Mo...
![[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard](http://auspowers.com/cdn/shop/products/B08G4MYYVL_1024x.jpg?v=1648555280)
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard
$232.00 AUD
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board This new upgraded silent mainboard does not currently come pre-installed on our Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the silent motherboard is a separate upgrade for all 3 ...
Creality 3D Printer 42-40 Steppe...
![[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series](http://auspowers.com/cdn/shop/products/B091CXPXVP_1024x.jpg?v=1648555205)
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series
$159.00 AUD
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series 42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series,like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / ...
Micro Swiss All Metal Hotend Kit...
![[Australia - AusPower] - Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max](http://auspowers.com/cdn/shop/products/B07NDL3PNX_1024x.jpg?v=1648554774)
Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max
$283.00 AUD
Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO: This is a drop in All Metal Conversion kit for the CR-10s Pro printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not ha...
E3D Volcano Nozzle - Brass (Stan...
![[Australia - AusPower] - E3D Volcano Nozzle - Brass (Standard): 0.40mm for 1.75mm Filament](http://auspowers.com/cdn/shop/products/B0163TTOAI_1024x.jpg?v=1648554626)
E3D Volcano Nozzle - Brass (Standard): 0.40mm for 1.75mm Filament
$117.00 AUD
E3D Volcano Nozzle - Brass (Standard): 0.40mm for 1.75mm Filament Volcano nozzles are super -fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. Volcano nozzles have extra-long heated melt zones for ultimate filament melt speeds. We've also carefully crafted the internal g...
Sovol Upgraded 4pcs Aluminum Han...
![[Australia - AusPower] - Sovol Upgraded 4pcs Aluminum Hand Twist Leveling Nut & 8pcs Heatbed Silicone Leveling Column Mounts for SV01/SV02/SV03/SV04, Ender 3/3 Pro/3 V2, Ender 5/5 Plus/5 Pro, CR-10, CR10S/10S Pro 3D Printer Dark Blue](http://auspowers.com/cdn/shop/products/B08FQSRCMD_1024x.jpg?v=1648554572)
Sovol Upgraded 4pcs Aluminum Hand Twist Leveling Nut & 8pcs Heatbed Silicone Leveling Column Mounts for SV01/SV02/SV03/SV04, Ender 3/3 Pro/3 V2, Ender 5/5 Plus/5 Pro, CR-10, CR10S/10S Pro 3D Printer Dark Blue
$115.00 AUD
Sovol Upgraded 4pcs Aluminum Hand Twist Leveling Nut & 8pcs Heatbed Silicone Leveling Column Mounts for SV01/SV02/SV03/SV04, Ender 3/3 Pro/3 V2, Ender 5/5 Plus/5 Pro, CR-10, CR10S/10S Pro 3D Printer For Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20. Upgrade...
10PCS 3D Printer TMC2208 Stepper...
![[Australia - AusPower] - 10PCS 3D Printer TMC2208 Stepper Motor Driver,TMC2208 V1.2 Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro TMC2208 V1.2](http://auspowers.com/cdn/shop/products/B08DFW1HDG_1024x.jpg?v=1648554386)
10PCS 3D Printer TMC2208 Stepper Motor Driver,TMC2208 V1.2 Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro TMC2208 V1.2
$192.00 AUD
10PCS 3D Printer TMC2208 Stepper Motor Driver,TMC2208 V1.2 Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro Specifications: Interface: Step/Dir Configuration: CFG Pins or UART Native Microsteps: up to 1/256 MicroPlyer Microsteps: 1/256 Logic Voltage (VIO): 3...
Creality Official 3D Printer Ext...
![[Australia - AusPower] - Creality Official 3D Printer Extruder, Ender 3 Extruder Upgraded Replacement, Ender 3 V2 Aluminum MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series](http://auspowers.com/cdn/shop/products/B079JZ374W_1024x.jpg?v=1648554149)
Creality Official 3D Printer Extruder, Ender 3 Extruder Upgraded Replacement, Ender 3 V2 Aluminum MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series
$109.00 AUD
Creality Official 3D Printer Extruder, Ender 3 Extruder Upgraded Replacement, Ender 3 V2 Aluminum MK8 Drive Feed Bowden Extruders for Ender 3 Series, Creality CR-10 Series, Ender 5 Series Specifications: Install Easily All Metal High Quality Durable Material Read more A must have upgraded kit for your printer. Upgraded 3D Printer Extruder Block....
STEPPERONLINE Nema 11 Bipolar St...
![[Australia - AusPower] - STEPPERONLINE Nema 11 Bipolar Stepper Motor 0.67A 14oz.in/9.5Ncm 4 Leads DIY Robot CNC](http://auspowers.com/cdn/shop/products/B00PNEPK94_1024x.jpg?v=1648554145)
STEPPERONLINE Nema 11 Bipolar Stepper Motor 0.67A 14oz.in/9.5Ncm 4 Leads DIY Robot CNC
$166.00 AUD
STEPPERONLINE Nema 11 Bipolar Stepper Motor 0.67A 14oz.in/9.5Ncm 4 Leads DIY Robot CNC This hybrid bipolar stepper motor has 1.8 deg. step angle (200 steps/revolution). Each phase draws 670 mA at 4.6V, allowing for a holding torque of 9.5Ncm(13.5oz.in). Electrical Specification: Manufacturer Part Number: 11HS18-0674S Motor Type: Bipolar Steppe...
Micro Swiss Plated A2 Tool Steel...
![[Australia - AusPower] - Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Builder 3D Printer .4mm](http://auspowers.com/cdn/shop/products/B07F457WBV_1024x.jpg?v=1648554096)
Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Builder 3D Printer .4mm
$156.00 AUD
Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Builder 3D Printer .4mm This nozzle is for Dremel Digilab 3D45 3D Printer, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any...
BIQU Nema17 Stepper Motor Steel ...
![[Australia - AusPower] - BIQU Nema17 Stepper Motor Steel and Rubber Vibration Dampers with 3pcsTL Smoother Addon Module for Pattern Elimination Motor Clipping Filter for Ender 3,CR-10 3D Printer](http://auspowers.com/cdn/shop/products/B08B3PB7HV_1024x.jpg?v=1648553988)
BIQU Nema17 Stepper Motor Steel and Rubber Vibration Dampers with 3pcsTL Smoother Addon Module for Pattern Elimination Motor Clipping Filter for Ender 3,CR-10 3D Printer
$139.00 AUD
BIQU Nema17 Stepper Motor Steel and Rubber Vibration Dampers with 3pcsTL Smoother Addon Module for Pattern Elimination Motor Clipping Filter for Ender 3,CR-10 3D Printer Specifications: Material:Steel & Rubber Damper Size: 53.853.8MM Thickness:6mm M3 Screws: Material: stainless steel Quantity: 12 pieces Package List: 3pcs Vibration Dampers 1...
Micro Swiss Plated Wear Resistan...
![[Australia - AusPower] - Micro Swiss Plated Wear Resistant High Flow Volcano Compatible/Artillery Sidewinder 1.75mm Nozzle .4mm](http://auspowers.com/cdn/shop/products/B01LZBMOE2_1024x.jpg?v=1648553783)
Micro Swiss Plated Wear Resistant High Flow Volcano Compatible/Artillery Sidewinder 1.75mm Nozzle .4mm
$123.00 AUD
Micro Swiss Plated Wear Resistant High Flow Volcano Compatible/Artillery Sidewinder 1.75mm Nozzle .4mm This is Micro Swiss Plated Wear Resistant nozzle for Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the l...