1PCS Pre-Soldered MPU9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI Compatible with Raspberry Pi ESP32
1PCS Pre-Soldered MPU9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI Compatible with Raspberry Pi ESP32
AITIAO MPU9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPIFeatures:This module integrates gyroscope, accelerometer and magnetometer into a single QFN package.The 9-axis sensor module features the immersion gold PCB, which uses the machine connecting process to make it work fine.Compared to previous generation, the MPU-9250 has its size smaller and its sensitivity improved to 0.15 μT/ LSB.Specifications:Module model: GY-9250Chip: MPU-9250Acceleration range: ±2 ±4 ±8 ±16 gSensitivity: up to 16,384 LSB/gGyroscope range: ± 2000 °/sSensitivity: up to 131 LSB/deg/secMagnetic Field Range: ± 4800 μTSupply Voltage: 4.4 to 6.5 V or 3.3V if you connect the jumper near the on-board voltage regulatorInterface: I2C2C Address: 0x68 by default, 0x69 if AD0 is pulled highModule size: approx. 15 x 25 mm/ 0.59 x 0.98 inch Pin spacing: approx. 2.54 mm/ 0.1 inchOn-board pull-up resistors on SDA, SCL, and nCSOn-board pull-down resistors on FSYNC and AD0TIPS: This MPU9250 GY-9250 module is ready to be plugged in. No soldering is needed. No dangerous and save time.Package Included:1PCS MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor
Product Features
- MPU9250 9-Axis SensorMain Chip:MPU-9250, MPU-9250 Sensor module( 3 axis accelerator, 3 axis gyro and 3 axis magnetometer)
- Exquisite QualityThe MPU-9250 9-axis sensor module features the immersion gold PCB, the MPU-9250 integrates a 3-axis magnetometer AK8963, The 16-bit AD converter is embedded in the chip, with 16-bit data output
- Power Supply3-5V (internal low dropout voltage regulator); Communication: standard IIC communication protocol
- CompatibleGY-9250 Gyroscope Acceleration Magnetic Sensor Perfect for all models of Raspberry Pi, ESP 32 and various microcontrollers.
- Pre-solderedSolderless! Pins are already attached. Ready to plug in and go, no dangerous and save time.