valterra

{"id":7137817886900,"title":"Valterra 200-C15W PVC Swing (No Spring) Check Valve, Clear, 1-1\/2\" Slip","handle":"valterra-200-c15w-pvc-swing-no-spring-check-valve-clear-1-1-2-slip","description":"\u003ch3\u003eValterra 200-C15W PVC Swing (No Spring) Check Valve, Clear, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 200-C15W check valve is made of clear schedule 40 (standard\nwall) PVC for corrosion resistance, high strength, and less weight than\nfittings made from metal. It is compatible with schedule 40 PVC (polyvinyl\nchloride) pipes and fittings or can be connected to other materials such as\nsteel, copper, or cast iron using transition fittings. Its full flow design\nallows for insignificant flow loss at the swing check, so no spring is needed.\nIt has 1-1\/2\" slip connectors at both ends to connect to pipes with a smooth\nbore for enhanced flow and has a maximum pressure rating of 150 psi. This\ncheck valve meets ASTM International and American National Standards Institute\n(ANSI) standards and is suitable for use with landscape and irrigation, pool\nand spa, aquaculture, and general purpose applications.Check valves have two\nports and restrict the flow of fluids and other loose materials through a pipe\nor passageway to one direction. Flow enters through one port and exits through\nthe other, closing when flow reverses or stops. Two common types of check\nvalves are ball cone valves and swing check valves. A ball cone valve utilizes\na spring-loaded ball seated against a cone-shaped interior surface to stop the\nflow of fluid in a forward direction, and a swing check valve has a movable\ndisc on a hinge to block reverse flow. Check valves are rated by their\ncracking pressure (the minimum upstream pressure required for the valve to\noperate), and they are used in various water, gas, air, and steam lines.\nValterra Products manufactures and distributes valves, hoses, sewer systems,\nand pool and spa products. The company, founded in 1981, is headquartered in\nMission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eClear PVC for corrosion resistance, high strength, and less weight than fittings made from metal\u003c\/li\u003e\n \u003cli\u003eFull flow design for insignificant flow loss at swing check\u003c\/li\u003e\n \u003cli\u003eSlip connection for easy attachment\u003c\/li\u003e\n \u003cli\u003eMaximum pressure rating 150 psi\u003c\/li\u003e\n \u003cli\u003eMeets ASTM and ANSI standards\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-19T23:41:43+10:00","created_at":"2022-05-19T23:41:45+10:00","vendor":"Valterra","type":"Check Valves","tags":["industrial"],"price":12700,"price_min":12700,"price_max":12700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41509483151540,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0064TQ2WQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 200-C15W PVC Swing (No Spring) Check Valve, Clear, 1-1\/2\" Slip","public_title":null,"options":["Default Title"],"price":12700,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"019079201560","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ2WQ.jpg?v=1653030128"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ2WQ.jpg?v=1653030128","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 200-C15W PVC Swing (No Spring) Check Valve, Clear, 1-1\/2\" Slip ","id":25915344486580,"position":1,"preview_image":{"aspect_ratio":0.702,"height":1200,"width":842,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ2WQ.jpg?v=1653030128"},"aspect_ratio":0.702,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ2WQ.jpg?v=1653030128","width":842}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 200-C15W PVC Swing (No Spring) Check Valve, Clear, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 200-C15W check valve is made of clear schedule 40 (standard\nwall) PVC for corrosion resistance, high strength, and less weight than\nfittings made from metal. It is compatible with schedule 40 PVC (polyvinyl\nchloride) pipes and fittings or can be connected to other materials such as\nsteel, copper, or cast iron using transition fittings. Its full flow design\nallows for insignificant flow loss at the swing check, so no spring is needed.\nIt has 1-1\/2\" slip connectors at both ends to connect to pipes with a smooth\nbore for enhanced flow and has a maximum pressure rating of 150 psi. This\ncheck valve meets ASTM International and American National Standards Institute\n(ANSI) standards and is suitable for use with landscape and irrigation, pool\nand spa, aquaculture, and general purpose applications.Check valves have two\nports and restrict the flow of fluids and other loose materials through a pipe\nor passageway to one direction. Flow enters through one port and exits through\nthe other, closing when flow reverses or stops. Two common types of check\nvalves are ball cone valves and swing check valves. A ball cone valve utilizes\na spring-loaded ball seated against a cone-shaped interior surface to stop the\nflow of fluid in a forward direction, and a swing check valve has a movable\ndisc on a hinge to block reverse flow. Check valves are rated by their\ncracking pressure (the minimum upstream pressure required for the valve to\noperate), and they are used in various water, gas, air, and steam lines.\nValterra Products manufactures and distributes valves, hoses, sewer systems,\nand pool and spa products. The company, founded in 1981, is headquartered in\nMission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eClear PVC for corrosion resistance, high strength, and less weight than fittings made from metal\u003c\/li\u003e\n \u003cli\u003eFull flow design for insignificant flow loss at swing check\u003c\/li\u003e\n \u003cli\u003eSlip connection for easy attachment\u003c\/li\u003e\n \u003cli\u003eMaximum pressure rating 150 psi\u003c\/li\u003e\n \u003cli\u003eMeets ASTM and ANSI standards\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7134428135604,"title":"Valterra 200-C20 Check Valve, 2in, Slip x Slip, Clear","handle":"valterra-200-c20-check-valve-2in-slip-x-slip-clear","description":"\u003ch3\u003eValterra 200-C20 Check Valve, 2in, Slip x Slip, Clear\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 200-C20 check valve is made of clear schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals. Its\nEPDM (ethylene propylene diene monomer) seal resists degradation caused by\nwater and oils, and its swing\/spring combination design allows the valve to be\ninstalled in any position. It has a 2\" slip connection at each end, which must\nbe fastened with glue, a maximum pressure rating of 150 pounds per square inch\n(psi), and a spring tension of 1\/2 lb. This check valve is suitable for use\nwith landscape and irrigation, pool and spa, aquaculture, and general purpose\napplications.Check valves have two ports and restrict the flow of fluids and\nother loose materials through a pipe or passageway to one direction. Flow\nenters through one port and exits through the other, closing when flow\nreverses or stops. Two common types of check valves are ball cone valves and\nswing check valves. A ball cone valve utilizes a spring-loaded ball seated\nagainst a cone-shaped interior surface to stop the flow of fluid in a forward\ndirection, and a swing check valve has a movable disc on a hinge to block\nreverse flow. Check valves are rated by their cracking pressure (the minimum\nupstream pressure required for the valve to operate), and they are used in\nvarious water, gas, air, and steam lines.Valterra Products manufactures and\ndistributes valves, hoses, sewer systems, and pool and spa products. The\ncompany, founded in 1981, is headquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and chemicals\u003c\/li\u003e\n \u003cli\u003eEPDM seal for resistance to water and oils\u003c\/li\u003e\n \u003cli\u003eMaximum pressure rating of 150 psi\u003c\/li\u003e\n \u003cli\u003eSpring tension of 1\/2 lb. for secure closure of valve\u003c\/li\u003e\n \u003cli\u003e2\" slip connections\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-14T20:14:47+10:00","created_at":"2022-05-14T20:14:48+10:00","vendor":"Valterra","type":"Check Valves","tags":["industrial"],"price":16300,"price_min":16300,"price_max":16300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41496420778164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0064TQ45G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 200-C20 Check Valve, 2in, Slip x Slip, Clear","public_title":null,"options":["Default Title"],"price":16300,"weight":472,"compare_at_price":null,"inventory_management":null,"barcode":"019079703200","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ45G.jpg?v=1652599578"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ45G.jpg?v=1652599578","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 200-C20 Check Valve, 2in, Slip x Slip, Clear ","id":25867882168500,"position":1,"preview_image":{"aspect_ratio":0.682,"height":1200,"width":818,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ45G.jpg?v=1652599578"},"aspect_ratio":0.682,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0064TQ45G.jpg?v=1652599578","width":818}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 200-C20 Check Valve, 2in, Slip x Slip, Clear\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 200-C20 check valve is made of clear schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals. Its\nEPDM (ethylene propylene diene monomer) seal resists degradation caused by\nwater and oils, and its swing\/spring combination design allows the valve to be\ninstalled in any position. It has a 2\" slip connection at each end, which must\nbe fastened with glue, a maximum pressure rating of 150 pounds per square inch\n(psi), and a spring tension of 1\/2 lb. This check valve is suitable for use\nwith landscape and irrigation, pool and spa, aquaculture, and general purpose\napplications.Check valves have two ports and restrict the flow of fluids and\nother loose materials through a pipe or passageway to one direction. Flow\nenters through one port and exits through the other, closing when flow\nreverses or stops. Two common types of check valves are ball cone valves and\nswing check valves. A ball cone valve utilizes a spring-loaded ball seated\nagainst a cone-shaped interior surface to stop the flow of fluid in a forward\ndirection, and a swing check valve has a movable disc on a hinge to block\nreverse flow. Check valves are rated by their cracking pressure (the minimum\nupstream pressure required for the valve to operate), and they are used in\nvarious water, gas, air, and steam lines.Valterra Products manufactures and\ndistributes valves, hoses, sewer systems, and pool and spa products. The\ncompany, founded in 1981, is headquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and chemicals\u003c\/li\u003e\n \u003cli\u003eEPDM seal for resistance to water and oils\u003c\/li\u003e\n \u003cli\u003eMaximum pressure rating of 150 psi\u003c\/li\u003e\n \u003cli\u003eSpring tension of 1\/2 lb. for secure closure of valve\u003c\/li\u003e\n \u003cli\u003e2\" slip connections\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7134771085492,"title":"Valterra 200-C20W PVC Swing (No Spring) Check Valve, Clear Blue, 2\" Slip , White","handle":"valterra-200-c20w-pvc-swing-no-spring-check-valve-clear-blue-2-slip-white","description":"\u003ch3\u003eValterra 200-C20W PVC Swing (No Spring) Check Valve, Clear Blue, 2\" Slip , White\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 200-C20W check valve is made of schedule 40 (standard wall) PVC\nfor corrosion resistance, high strength, and less weight than fittings made\nfrom metal. It is compatible with schedule 40 PVC (polyvinyl chloride) pipes\nand fittings or can be connected to other materials such as steel, copper, or\ncast iron using transition fittings. Its full flow design allows for\ninsignificant flow loss at the swing check, so no spring is needed. It has 2\"\nslip connectors at both ends to connect to pipes with a smooth bore for\nenhanced flow and has a maximum pressure rating of 150 psi. This check valve\nmeets ASTM International and American National Standards Institute (ANSI)\nstandards and is suitable for use with landscape and irrigation, pool and spa,\naquaculture, and general purpose applications.Check valves have two ports and\nrestrict the flow of fluids and other loose materials through a pipe or\npassageway to one direction. Flow enters through one port and exits through\nthe other, closing when flow reverses or stops. Two common types of check\nvalves are ball cone valves and swing check valves. A ball cone valve utilizes\na spring-loaded ball seated against a cone-shaped interior surface to stop the\nflow of fluid in a forward direction, and a swing check valve has a movable\ndisc on a hinge to block reverse flow. Check valves are rated by their\ncracking pressure (the minimum upstream pressure required for the valve to\noperate), and they are used in various water, gas, air, and steam lines.\nValterra Products manufactures and distributes valves, hoses, sewer systems,\nand pool and spa products. The company, founded in 1981, is headquartered in\nMission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eClear blue PVC for corrosion resistance, high strength, and less weight than fittings made from metal\u003c\/li\u003e\n \u003cli\u003eFull flow design for insignificant flow loss at swing check\u003c\/li\u003e\n \u003cli\u003eSlip connection for easy attachment\u003c\/li\u003e\n \u003cli\u003eMaximum pressure rating 150 psi\u003c\/li\u003e\n \u003cli\u003eMeets ASTM and ANSI standards\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-15T20:55:31+10:00","created_at":"2022-05-15T20:55:32+10:00","vendor":"Valterra","type":"Check Valves","tags":["industrial"],"price":15300,"price_min":15300,"price_max":15300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41498082607284,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00B95U3TS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 200-C20W PVC Swing (No Spring) Check Valve, Clear Blue, 2\" Slip , White","public_title":null,"options":["Default Title"],"price":15300,"weight":431,"compare_at_price":null,"inventory_management":null,"barcode":"019079202062","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00B95U3TS.jpg?v=1652684630"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95U3TS.jpg?v=1652684630","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 200-C20W PVC Swing (No Spring) Check Valve, Clear Blue, 2\" Slip , White ","id":25875592315060,"position":1,"preview_image":{"aspect_ratio":0.646,"height":1200,"width":775,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95U3TS.jpg?v=1652684630"},"aspect_ratio":0.646,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95U3TS.jpg?v=1652684630","width":775}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 200-C20W PVC Swing (No Spring) Check Valve, Clear Blue, 2\" Slip , White\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 200-C20W check valve is made of schedule 40 (standard wall) PVC\nfor corrosion resistance, high strength, and less weight than fittings made\nfrom metal. It is compatible with schedule 40 PVC (polyvinyl chloride) pipes\nand fittings or can be connected to other materials such as steel, copper, or\ncast iron using transition fittings. Its full flow design allows for\ninsignificant flow loss at the swing check, so no spring is needed. It has 2\"\nslip connectors at both ends to connect to pipes with a smooth bore for\nenhanced flow and has a maximum pressure rating of 150 psi. This check valve\nmeets ASTM International and American National Standards Institute (ANSI)\nstandards and is suitable for use with landscape and irrigation, pool and spa,\naquaculture, and general purpose applications.Check valves have two ports and\nrestrict the flow of fluids and other loose materials through a pipe or\npassageway to one direction. Flow enters through one port and exits through\nthe other, closing when flow reverses or stops. Two common types of check\nvalves are ball cone valves and swing check valves. A ball cone valve utilizes\na spring-loaded ball seated against a cone-shaped interior surface to stop the\nflow of fluid in a forward direction, and a swing check valve has a movable\ndisc on a hinge to block reverse flow. Check valves are rated by their\ncracking pressure (the minimum upstream pressure required for the valve to\noperate), and they are used in various water, gas, air, and steam lines.\nValterra Products manufactures and distributes valves, hoses, sewer systems,\nand pool and spa products. The company, founded in 1981, is headquartered in\nMission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eClear blue PVC for corrosion resistance, high strength, and less weight than fittings made from metal\u003c\/li\u003e\n \u003cli\u003eFull flow design for insignificant flow loss at swing check\u003c\/li\u003e\n \u003cli\u003eSlip connection for easy attachment\u003c\/li\u003e\n \u003cli\u003eMaximum pressure rating 150 psi\u003c\/li\u003e\n \u003cli\u003eMeets ASTM and ANSI standards\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7138765865140,"title":"Valterra 2101X PVC Gate Valve, White, 1-1\/2\" Inner Diameter, 1.9\" Outer Diameter Unibody Valve, Slip w\/ Gate Keeper","handle":"valterra-2101x-pvc-gate-valve-white-1-1-2-inner-diameter-1-9-outer-diameter-unibody-valve-slip-w-gate-keeper","description":"\u003ch3\u003eValterra 2101X PVC Gate Valve, White, 1-1\/2\" Inner Diameter, 1.9\" Outer Diameter Unibody Valve, Slip w\/ Gate Keeper\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis type of slide gate valve was originally designed for the Pool \u0026amp; Spa\nIndustry to hold higher pressures compared to the bolted versions. It is\ntypically used to hold back Above Ground Pool, Hot Tub or Spa water while the\nfilter is being changed or maintenance is being done on the pump but has many\nother applications. It has a one piece (body and fittings) UniBody\nconfiguration which is made from polyvinyl chloride (PVC). It can be used in\nany application that requires less than 75 pounds per square inch (PSI) of\nworking pressure and is in an easily accessible location as it is not\nrepairable. Easy push pull operation; locks in the closed position and comes\nwith a gate keeper to hold the valve open. These slide valves are sometimes\nreferred to as “knife or guillotine” gate valves and are a great alternative\nto ball valves in low pressure applications since they are full flow and quick\nopening. This valve is designed for use with clean water. The handle is\nthreaded for easy replacement – if you do so be sure not to damage the valve\nshaft. The Valterra 2101X Unibody gate valve has 1-1\/2\" Schedule 40 female\nslip\/hub fittings with solvent cement glue traps to help prevent solvent from\nleaking into the valve seal area. The fittings receive 1-1\/2\" pipe. Its shaft\nis made of 304 stainless steel; the paddle material is polypropylene (PP); the\nseals are made of thermoplastic vulcanizate (TPV) for dimensional stability.\nAll materials resist corrosion and mild chemicals. It has a working pressure\nrating of 75 (PSI) in both the open and closed positions. For throttling or\nmid-flow closure (closing the valve while water is flowing) the maximum\npressure rating is 15 PSI. The maximum temperature rating for the 2101X is 167\ndegrees F (75 degrees C). For applications that hold back static water\npressure see the “Static Head Pressure Chart” to determine the water pressure\nbased on the height of the water being held back.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for quick opening and shut off in vacuum or pressure applications - Can be used with air or clean water up to 75 PSI\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full Port - Simple push pull operation - Twist lock closure \u0026amp; Gate Keeper to hold open - Solvent traps help keep solvent out of seal area\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Working pressure of 75 PSI in both open and closed postions - Sch 40 PVC with female Slip\/Hub fittings - All materials resist corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Non-repairable body - Handle is threaded for easy replacement\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-21T01:56:33+10:00","created_at":"2022-05-21T01:56:36+10:00","vendor":"Valterra","type":"Gate Valves","tags":["industrial"],"price":11700,"price_min":11700,"price_max":11700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41513485041844,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00B95SMUA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 2101X PVC Gate Valve, White, 1-1\/2\" Inner Diameter, 1.9\" Outer Diameter Unibody Valve, Slip w\/ Gate Keeper","public_title":null,"options":["Default Title"],"price":11700,"weight":204,"compare_at_price":null,"inventory_management":null,"barcode":"019079921017","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00B95SMUA.jpg?v=1653118162","\/\/auspowers.com\/cdn\/shop\/products\/61g-ZAhlb5L.jpg?v=1653062196"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95SMUA.jpg?v=1653118162","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 2101X PVC Gate Valve, White, 1-1\/2\" Inner Diameter, 1.9\" Outer Diameter Unibody Valve, Slip w\/ Gate Keeper ","id":25925302714548,"position":1,"preview_image":{"aspect_ratio":0.653,"height":1200,"width":784,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95SMUA.jpg?v=1653118162"},"aspect_ratio":0.653,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95SMUA.jpg?v=1653118162","width":784},{"alt":"[Australia - AusPower] - Valterra 2101X PVC Gate Valve, White, 1-1\/2\" Inner Diameter, 1.9\" Outer Diameter Unibody Valve, Slip w\/ Gate Keeper ","id":25919406211252,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61g-ZAhlb5L.jpg?v=1653062196"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61g-ZAhlb5L.jpg?v=1653062196","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 2101X PVC Gate Valve, White, 1-1\/2\" Inner Diameter, 1.9\" Outer Diameter Unibody Valve, Slip w\/ Gate Keeper\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis type of slide gate valve was originally designed for the Pool \u0026amp; Spa\nIndustry to hold higher pressures compared to the bolted versions. It is\ntypically used to hold back Above Ground Pool, Hot Tub or Spa water while the\nfilter is being changed or maintenance is being done on the pump but has many\nother applications. It has a one piece (body and fittings) UniBody\nconfiguration which is made from polyvinyl chloride (PVC). It can be used in\nany application that requires less than 75 pounds per square inch (PSI) of\nworking pressure and is in an easily accessible location as it is not\nrepairable. Easy push pull operation; locks in the closed position and comes\nwith a gate keeper to hold the valve open. These slide valves are sometimes\nreferred to as “knife or guillotine” gate valves and are a great alternative\nto ball valves in low pressure applications since they are full flow and quick\nopening. This valve is designed for use with clean water. The handle is\nthreaded for easy replacement – if you do so be sure not to damage the valve\nshaft. The Valterra 2101X Unibody gate valve has 1-1\/2\" Schedule 40 female\nslip\/hub fittings with solvent cement glue traps to help prevent solvent from\nleaking into the valve seal area. The fittings receive 1-1\/2\" pipe. Its shaft\nis made of 304 stainless steel; the paddle material is polypropylene (PP); the\nseals are made of thermoplastic vulcanizate (TPV) for dimensional stability.\nAll materials resist corrosion and mild chemicals. It has a working pressure\nrating of 75 (PSI) in both the open and closed positions. For throttling or\nmid-flow closure (closing the valve while water is flowing) the maximum\npressure rating is 15 PSI. The maximum temperature rating for the 2101X is 167\ndegrees F (75 degrees C). For applications that hold back static water\npressure see the “Static Head Pressure Chart” to determine the water pressure\nbased on the height of the water being held back.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for quick opening and shut off in vacuum or pressure applications - Can be used with air or clean water up to 75 PSI\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full Port - Simple push pull operation - Twist lock closure \u0026amp; Gate Keeper to hold open - Solvent traps help keep solvent out of seal area\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Working pressure of 75 PSI in both open and closed postions - Sch 40 PVC with female Slip\/Hub fittings - All materials resist corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Non-repairable body - Handle is threaded for easy replacement\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7135206572212,"title":"Valterra 2201X PVC Unibody Gate Valve, Silver, 2\" Slip w\/Gate Keeper","handle":"valterra-2201x-pvc-unibody-gate-valve-silver-2-slip-w-gate-keeper","description":"\u003ch3\u003eValterra 2201X PVC Unibody Gate Valve, Silver, 2\" Slip w\/Gate Keeper\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eOne piece PCV UniBody configuration. Stainless steel shafts prevent rust or\ncorrosion. Locking handle provides positive shut off and easy gate opening.\nMaximum recommended working pressure is 50 psi. Solvent Cement traps to\nprevent from over gluing.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOne piece PVC UniBody configuration\u003c\/li\u003e\n \u003cli\u003eStainless steel shafts prevent rust or corrosion\u003c\/li\u003e\n \u003cli\u003eLocking handle provides positive shut off and easy gate opening\u003c\/li\u003e\n \u003cli\u003eMaximum recommended working pressure is 50 psi\u003c\/li\u003e\n \u003cli\u003eSolvent Cement traps to prevent from over gluing\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-16T21:16:46+10:00","created_at":"2022-05-16T21:16:48+10:00","vendor":"Valterra","type":"Gate Valves","tags":["industrial"],"price":12800,"price_min":12800,"price_max":12800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41499745714356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00B95RERM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 2201X PVC Unibody Gate Valve, Silver, 2\" Slip w\/Gate Keeper","public_title":null,"options":["Default Title"],"price":12800,"weight":386,"compare_at_price":null,"inventory_management":null,"barcode":"019079922014","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00B95RERM.jpg?v=1652769504","\/\/auspowers.com\/cdn\/shop\/products\/61LJzigsGsL.jpg?v=1652699809"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95RERM.jpg?v=1652769504","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 2201X PVC Unibody Gate Valve, Silver, 2\" Slip w\/Gate Keeper ","id":25884819980468,"position":1,"preview_image":{"aspect_ratio":0.556,"height":1200,"width":667,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95RERM.jpg?v=1652769504"},"aspect_ratio":0.556,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95RERM.jpg?v=1652769504","width":667},{"alt":"[Australia - AusPower] - Valterra 2201X PVC Unibody Gate Valve, Silver, 2\" Slip w\/Gate Keeper ","id":25877169897652,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61LJzigsGsL.jpg?v=1652699809"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61LJzigsGsL.jpg?v=1652699809","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 2201X PVC Unibody Gate Valve, Silver, 2\" Slip w\/Gate Keeper\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eOne piece PCV UniBody configuration. Stainless steel shafts prevent rust or\ncorrosion. Locking handle provides positive shut off and easy gate opening.\nMaximum recommended working pressure is 50 psi. Solvent Cement traps to\nprevent from over gluing.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eOne piece PVC UniBody configuration\u003c\/li\u003e\n \u003cli\u003eStainless steel shafts prevent rust or corrosion\u003c\/li\u003e\n \u003cli\u003eLocking handle provides positive shut off and easy gate opening\u003c\/li\u003e\n \u003cli\u003eMaximum recommended working pressure is 50 psi\u003c\/li\u003e\n \u003cli\u003eSolvent Cement traps to prevent from over gluing\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7135946637492,"title":"Valterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip","handle":"valterra-6101-pvc-gate-valve-white-1-1-2-slip","description":"\u003ch3\u003eValterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis type of slide gate valve was originally designed for draining tanks and\ncontrolling shallow bodies of water like ponds. They also can also be used as\nshut off valves in low pressure or vacuum air lines. Please note that each\nvalve size has an open and closed pressure rating. Because the plastic paddle\ncan flex with flowing water they are not good for throttling water or trying\nto close the valve when water is flowing – thus the low mid flow cut off water\npressure of ~6psi. These slide valves are sometimes referred to as “knife”\ngate valves and are a great alternative to ball valves in low pressure\napplications since they are full flow, quick opening, and are generally a much\nlower cost especially in larger sizes. Works well with soft debris like waste\nbut hard debris can settle in the bottom of the valve seat\/slot and prevent it\nfrom closing completely. They can easily be repaired by unbolting and\nreplacing the seals or the valve body. The handles simply unscrew for easy\nreplacement – if you do so be sure not to damage the valve shaft. Extension\nrods are available for remote actuation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off for liquids.\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full port opening - Simple push\/pull operation\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Maximum Pressure - 30 psi Open\/45 psi Closed, Schedule 40 PVC Slip fittings\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Replaceable body, seals and handle\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-17T22:12:16+10:00","created_at":"2022-05-17T22:12:20+10:00","vendor":"Valterra","type":"Gate Valves","tags":["industrial"],"price":13200,"price_min":13200,"price_max":13200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41502222614708,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000PR3FDW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip","public_title":null,"options":["Default Title"],"price":13200,"weight":322,"compare_at_price":null,"inventory_management":null,"barcode":"019079061010","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FDW.jpg?v=1652858075","\/\/auspowers.com\/cdn\/shop\/products\/61VWeuoUYpL.jpg?v=1652789540","\/\/auspowers.com\/cdn\/shop\/products\/41c_qxTMPsL_a61f8063-b0ee-4dd2-aef4-22d8b2b9a570.jpg?v=1652789540"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FDW.jpg?v=1652858075","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip ","id":25893512282292,"position":1,"preview_image":{"aspect_ratio":0.658,"height":1200,"width":789,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FDW.jpg?v=1652858075"},"aspect_ratio":0.658,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FDW.jpg?v=1652858075","width":789},{"alt":"[Australia - AusPower] - Valterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip ","id":25886537023668,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61VWeuoUYpL.jpg?v=1652789540"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61VWeuoUYpL.jpg?v=1652789540","width":1000},{"alt":"[Australia - AusPower] - Valterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip ","id":25886537056436,"position":3,"preview_image":{"aspect_ratio":0.766,"height":500,"width":383,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41c_qxTMPsL_a61f8063-b0ee-4dd2-aef4-22d8b2b9a570.jpg?v=1652789540"},"aspect_ratio":0.766,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41c_qxTMPsL_a61f8063-b0ee-4dd2-aef4-22d8b2b9a570.jpg?v=1652789540","width":383}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 6101 PVC Gate Valve, White, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis type of slide gate valve was originally designed for draining tanks and\ncontrolling shallow bodies of water like ponds. They also can also be used as\nshut off valves in low pressure or vacuum air lines. Please note that each\nvalve size has an open and closed pressure rating. Because the plastic paddle\ncan flex with flowing water they are not good for throttling water or trying\nto close the valve when water is flowing – thus the low mid flow cut off water\npressure of ~6psi. These slide valves are sometimes referred to as “knife”\ngate valves and are a great alternative to ball valves in low pressure\napplications since they are full flow, quick opening, and are generally a much\nlower cost especially in larger sizes. Works well with soft debris like waste\nbut hard debris can settle in the bottom of the valve seat\/slot and prevent it\nfrom closing completely. They can easily be repaired by unbolting and\nreplacing the seals or the valve body. The handles simply unscrew for easy\nreplacement – if you do so be sure not to damage the valve shaft. Extension\nrods are available for remote actuation.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off for liquids.\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full port opening - Simple push\/pull operation\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Maximum Pressure - 30 psi Open\/45 psi Closed, Schedule 40 PVC Slip fittings\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Replaceable body, seals and handle\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7134778425524,"title":"Valterra 6201 PVC Gate Valve, White, 2\" Slip","handle":"valterra-6201-pvc-gate-valve-white-2-slip","description":"\u003ch3\u003eValterra 6201 PVC Gate Valve, White, 2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 6201 gate valve has 2\" female slip connection openings, and a\nwhite PVC (polyvinyl chloride) body and hubs for resistance to corrosion and\nmild chemicals. Its shaft is made of 304 stainless steel and its paddle is\nmade of polypropylene for resistance to corrosion and chemicals. Its seals are\nmade of thermoplastic vulcanizate (TPV) for dimensional stability and\nresistance to chemicals. It has a maximum pressure rating of 40 pounds per\nsquare inch (psi), a mid-flow maximum pressure rating of 1 psi, and a maximum\ntemperature rating of 167 degrees F (75 degrees C). This gate valve measures\n10.25 x 3.37 x 3.5 inches\/260 x 86 x 105mm (H x W x D) in a fully open\nposition. (H is height, the vertical distance from bottom to top; W is width,\nthe horizontal distance from left to right; D is depth, the horizontal\ndistance from front to back.) It is suitable for use with landscape and\nirrigation, pool and spa, aquaculture, and general purpose applications.Gate\nvalves control flow in a piping system by lifting a gate out of the path of\nsteam, fluids, or gases. They are designed to block or permit flow, as the\nvibrations and force of flow repeatedly striking a partly lowered gate can\ndamage the gate and seats. To accommodate different flows and pressure\nrequirements, gates come in four types: solid wedge (appropriate for almost\nall liquid service), flexible wedge (appropriate for steam service), split\nwedge (appropriate for normal temperature, non-condensing gas and liquid\nservice, including corrosive service), and parallel disc (appropriate for high\nand low pressure applications). Hand wheels or levers activate the screw\nmechanism in the valve’s bonnet, which comes in various designs, to open and\nclose the gate. Union bonnets are preferable for building service piping,\nthreaded-in (or screw-in) bonnets work well for lighter-duty usage, and bolted\nbody-bonnet connections are used primarily in iron multi-turn valves. Most\ngate valves have either a rising stem, which moves up and down with the gate,\nor a non-rising stem, which remains fixed in place. When closed, the gate and\nits seats form tight planar sealing surfaces, ideal for linear liquid flow.\nGate valves are used in air, gas, liquid, and steam applications.Valterra\nProducts manufactures and distributes valves, hoses, sewer systems, and pool\nand spa products. The company, founded in 1981, is headquartered in Mission\nHills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean\/gray\/waste water\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full port opening - Simple push\/pull operation\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Maximum Pressure - 20 psi Open\/40 psi Closed, Schedule 40 PVC Slip fittings\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-15T21:16:44+10:00","created_at":"2022-05-15T21:16:47+10:00","vendor":"Valterra","type":"Gate Valves","tags":["industrial"],"price":14500,"price_min":14500,"price_max":14500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41498091651252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B005OTLJNE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 6201 PVC Gate Valve, White, 2\" Slip","public_title":null,"options":["Default Title"],"price":14500,"weight":413,"compare_at_price":null,"inventory_management":null,"barcode":"019079062017","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B005OTLJNE.jpg?v=1652685610","\/\/auspowers.com\/cdn\/shop\/products\/61oQBwspp5L.jpg?v=1652613407","\/\/auspowers.com\/cdn\/shop\/products\/41c_qxTMPsL.jpg?v=1652613407"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B005OTLJNE.jpg?v=1652685610","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 6201 PVC Gate Valve, White, 2\" Slip ","id":25875679150260,"position":1,"preview_image":{"aspect_ratio":0.633,"height":1200,"width":759,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B005OTLJNE.jpg?v=1652685610"},"aspect_ratio":0.633,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B005OTLJNE.jpg?v=1652685610","width":759},{"alt":"[Australia - AusPower] - Valterra 6201 PVC Gate Valve, White, 2\" Slip ","id":25868834570420,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61oQBwspp5L.jpg?v=1652613407"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61oQBwspp5L.jpg?v=1652613407","width":1000},{"alt":"[Australia - AusPower] - Valterra 6201 PVC Gate Valve, White, 2\" Slip ","id":25868834603188,"position":3,"preview_image":{"aspect_ratio":0.766,"height":500,"width":383,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41c_qxTMPsL.jpg?v=1652613407"},"aspect_ratio":0.766,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41c_qxTMPsL.jpg?v=1652613407","width":383}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 6201 PVC Gate Valve, White, 2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 6201 gate valve has 2\" female slip connection openings, and a\nwhite PVC (polyvinyl chloride) body and hubs for resistance to corrosion and\nmild chemicals. Its shaft is made of 304 stainless steel and its paddle is\nmade of polypropylene for resistance to corrosion and chemicals. Its seals are\nmade of thermoplastic vulcanizate (TPV) for dimensional stability and\nresistance to chemicals. It has a maximum pressure rating of 40 pounds per\nsquare inch (psi), a mid-flow maximum pressure rating of 1 psi, and a maximum\ntemperature rating of 167 degrees F (75 degrees C). This gate valve measures\n10.25 x 3.37 x 3.5 inches\/260 x 86 x 105mm (H x W x D) in a fully open\nposition. (H is height, the vertical distance from bottom to top; W is width,\nthe horizontal distance from left to right; D is depth, the horizontal\ndistance from front to back.) It is suitable for use with landscape and\nirrigation, pool and spa, aquaculture, and general purpose applications.Gate\nvalves control flow in a piping system by lifting a gate out of the path of\nsteam, fluids, or gases. They are designed to block or permit flow, as the\nvibrations and force of flow repeatedly striking a partly lowered gate can\ndamage the gate and seats. To accommodate different flows and pressure\nrequirements, gates come in four types: solid wedge (appropriate for almost\nall liquid service), flexible wedge (appropriate for steam service), split\nwedge (appropriate for normal temperature, non-condensing gas and liquid\nservice, including corrosive service), and parallel disc (appropriate for high\nand low pressure applications). Hand wheels or levers activate the screw\nmechanism in the valve’s bonnet, which comes in various designs, to open and\nclose the gate. Union bonnets are preferable for building service piping,\nthreaded-in (or screw-in) bonnets work well for lighter-duty usage, and bolted\nbody-bonnet connections are used primarily in iron multi-turn valves. Most\ngate valves have either a rising stem, which moves up and down with the gate,\nor a non-rising stem, which remains fixed in place. When closed, the gate and\nits seats form tight planar sealing surfaces, ideal for linear liquid flow.\nGate valves are used in air, gas, liquid, and steam applications.Valterra\nProducts manufactures and distributes valves, hoses, sewer systems, and pool\nand spa products. The company, founded in 1981, is headquartered in Mission\nHills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean\/gray\/waste water\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full port opening - Simple push\/pull operation\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Maximum Pressure - 20 psi Open\/40 psi Closed, Schedule 40 PVC Slip fittings\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7135973605556,"title":"Valterra 700-15 PVC Ball Valve, White, 1-1\/2\" Slip","handle":"valterra-700-15-pvc-ball-valve-white-1-1-2-slip","description":"\u003ch3\u003eValterra 700-15 PVC Ball Valve, White, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 700-15 ball valve is made of white schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals, and is\nsuitable for use as an inline valve for connecting two pipes going in the same\ndirection. It has a maximum operating pressure of 150 pounds per square inch\n(psi), and two 1-1\/2\" female slip connections. This ball valve is suitable for\nuse with landscape and irrigation, pool and spa, aquaculture, and general\npurpose applications. Ball valves use a spherical disc to control the flow\nbetween pipes, tubes, or hoses. Flow is allowed when the hole that pierces the\nball-shaped disc is in line with the inlet and outlet of the valve and is\nblocked when the ball is horizontally swiveled 90 degrees, so that the hole of\nthe ball is perpendicular to the opening of the valve. Ball valves can be\nreferred to as full port or reduced port (also known as regular or standard\nport) depending on the inner diameter or the valve. A ball valve is full port\nif the hole of the ball is the same size as the inner diameter of the\nconnecting pipeline (resulting in lower friction) and termed reduced port if\nthe hole of the valve is one pipe size smaller than the pipe, resulting in\nless flow through the valve than through the shaft of the pipe. Ball valves\nmay have a handle or lever that aligns with the ball’s position (open or\nclosed) for manual operation. They are primarily used in air, gas, liquid, and\nsteam applications. Valterra Products manufactures and distributes valves,\nhoses, sewer systems, and pool and spa products. The company, founded in 1981,\nis headquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eMaximum operating pressure rating of 150 ps\u003c\/li\u003e\n \u003cli\u003eInline valve for connecting two pipes going in the same direction\u003c\/li\u003e\n \u003cli\u003e1-1\/2\" female slip connections\u003c\/li\u003e\n \u003cli\u003eSuitable for residential, commercial, industrial, and agricultural use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-17T22:31:44+10:00","created_at":"2022-05-17T22:31:45+10:00","vendor":"Valterra","type":"Ball Valves","tags":["industrial"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41502290444468,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000PR6XPO","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 700-15 PVC Ball Valve, White, 1-1\/2\" Slip","public_title":null,"options":["Default Title"],"price":11500,"weight":318,"compare_at_price":null,"inventory_management":null,"barcode":"019079607003","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000PR6XPO.jpg?v=1652859036"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR6XPO.jpg?v=1652859036","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 700-15 PVC Ball Valve, White, 1-1\/2\" Slip ","id":25893575557300,"position":1,"preview_image":{"aspect_ratio":1.161,"height":1034,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR6XPO.jpg?v=1652859036"},"aspect_ratio":1.161,"height":1034,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR6XPO.jpg?v=1652859036","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 700-15 PVC Ball Valve, White, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 700-15 ball valve is made of white schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals, and is\nsuitable for use as an inline valve for connecting two pipes going in the same\ndirection. It has a maximum operating pressure of 150 pounds per square inch\n(psi), and two 1-1\/2\" female slip connections. This ball valve is suitable for\nuse with landscape and irrigation, pool and spa, aquaculture, and general\npurpose applications. Ball valves use a spherical disc to control the flow\nbetween pipes, tubes, or hoses. Flow is allowed when the hole that pierces the\nball-shaped disc is in line with the inlet and outlet of the valve and is\nblocked when the ball is horizontally swiveled 90 degrees, so that the hole of\nthe ball is perpendicular to the opening of the valve. Ball valves can be\nreferred to as full port or reduced port (also known as regular or standard\nport) depending on the inner diameter or the valve. A ball valve is full port\nif the hole of the ball is the same size as the inner diameter of the\nconnecting pipeline (resulting in lower friction) and termed reduced port if\nthe hole of the valve is one pipe size smaller than the pipe, resulting in\nless flow through the valve than through the shaft of the pipe. Ball valves\nmay have a handle or lever that aligns with the ball’s position (open or\nclosed) for manual operation. They are primarily used in air, gas, liquid, and\nsteam applications. Valterra Products manufactures and distributes valves,\nhoses, sewer systems, and pool and spa products. The company, founded in 1981,\nis headquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eMaximum operating pressure rating of 150 ps\u003c\/li\u003e\n \u003cli\u003eInline valve for connecting two pipes going in the same direction\u003c\/li\u003e\n \u003cli\u003e1-1\/2\" female slip connections\u003c\/li\u003e\n \u003cli\u003eSuitable for residential, commercial, industrial, and agricultural use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7135922028724,"title":"Valterra 700-15F PVC Ball Valve, White, 1-1\/2\" FPT","handle":"valterra-700-15f-pvc-ball-valve-white-1-1-2-fpt","description":"\u003ch3\u003eValterra 700-15F PVC Ball Valve, White, 1-1\/2\" FPT\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 700-15F ball valve is made of white schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals, and is\nsuitable for use as an inline valve for connecting two pipes going in the same\ndirection. It has a maximum operating pressure of 150 pounds per square inch\n(psi), and two 1-1\/2\" female National Pipe Taper (NPT) threaded connections.\nThis ball valve is suitable for use with landscape and irrigation, pool and\nspa, aquaculture, and general purpose applications. Ball valves use a\nspherical disc to control the flow between pipes, tubes, or hoses. Flow is\nallowed when the hole that pierces the ball-shaped disc is in line with the\ninlet and outlet of the valve and is blocked when the ball is horizontally\nswiveled 90 degrees, so that the hole of the ball is perpendicular to the\nopening of the valve. Ball valves can be referred to as full port or reduced\nport (also known as regular or standard port) depending on the inner diameter\nor the valve. A ball valve is full port if the hole of the ball is the same\nsize as the inner diameter of the connecting pipeline (resulting in lower\nfriction) and termed reduced port if the hole of the valve is one pipe size\nsmaller than the pipe, resulting in less flow through the valve than through\nthe shaft of the pipe. Ball valves may have a handle or lever that aligns with\nthe ball’s position (open or closed) for manual operation. They are primarily\nused in air, gas, liquid, and steam applications. Valterra Products\nmanufactures and distributes valves, hoses, sewer systems, and pool and spa\nproducts. The company, founded in 1981, is headquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eMaximum operating pressure rating of 150 ps\u003c\/li\u003e\n \u003cli\u003eInline valve for connecting two pipes going in the same direction\u003c\/li\u003e\n \u003cli\u003e1-1\/2\" female NPT connections\u003c\/li\u003e\n \u003cli\u003eSuitable for residential, commercial, industrial, and agricultural use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-17T21:19:59+10:00","created_at":"2022-05-17T21:20:01+10:00","vendor":"Valterra","type":"Ball Valves","tags":["industrial"],"price":11900,"price_min":11900,"price_max":11900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41502146691252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00B95QO2I","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 700-15F PVC Ball Valve, White, 1-1\/2\" FPT","public_title":null,"options":["Default Title"],"price":11900,"weight":340,"compare_at_price":null,"inventory_management":null,"barcode":"019079701565","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00B95QO2I.jpg?v=1652855708"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95QO2I.jpg?v=1652855708","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 700-15F PVC Ball Valve, White, 1-1\/2\" FPT ","id":25893160878260,"position":1,"preview_image":{"aspect_ratio":1.173,"height":1279,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95QO2I.jpg?v=1652855708"},"aspect_ratio":1.173,"height":1279,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95QO2I.jpg?v=1652855708","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 700-15F PVC Ball Valve, White, 1-1\/2\" FPT\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 700-15F ball valve is made of white schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals, and is\nsuitable for use as an inline valve for connecting two pipes going in the same\ndirection. It has a maximum operating pressure of 150 pounds per square inch\n(psi), and two 1-1\/2\" female National Pipe Taper (NPT) threaded connections.\nThis ball valve is suitable for use with landscape and irrigation, pool and\nspa, aquaculture, and general purpose applications. Ball valves use a\nspherical disc to control the flow between pipes, tubes, or hoses. Flow is\nallowed when the hole that pierces the ball-shaped disc is in line with the\ninlet and outlet of the valve and is blocked when the ball is horizontally\nswiveled 90 degrees, so that the hole of the ball is perpendicular to the\nopening of the valve. Ball valves can be referred to as full port or reduced\nport (also known as regular or standard port) depending on the inner diameter\nor the valve. A ball valve is full port if the hole of the ball is the same\nsize as the inner diameter of the connecting pipeline (resulting in lower\nfriction) and termed reduced port if the hole of the valve is one pipe size\nsmaller than the pipe, resulting in less flow through the valve than through\nthe shaft of the pipe. Ball valves may have a handle or lever that aligns with\nthe ball’s position (open or closed) for manual operation. They are primarily\nused in air, gas, liquid, and steam applications. Valterra Products\nmanufactures and distributes valves, hoses, sewer systems, and pool and spa\nproducts. The company, founded in 1981, is headquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eMaximum operating pressure rating of 150 ps\u003c\/li\u003e\n \u003cli\u003eInline valve for connecting two pipes going in the same direction\u003c\/li\u003e\n \u003cli\u003e1-1\/2\" female NPT connections\u003c\/li\u003e\n \u003cli\u003eSuitable for residential, commercial, industrial, and agricultural use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7134403068084,"title":"Valterra 700-20 PVC Ball Valve, White, 2\" Slip","handle":"valterra-700-20-pvc-ball-valve-white-2-slip","description":"\u003ch3\u003eValterra 700-20 PVC Ball Valve, White, 2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 700-20 ball valve is made of white schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals, and is\nsuitable for use as an inline valve for connecting two pipes going in the same\ndirection. It has a maximum operating pressure of 150 pounds per square inch\n(psi), and two 2\" female slip connections. This ball valve is suitable for use\nwith landscape and irrigation, pool and spa, aquaculture, and general purpose\napplications. Ball valves use a spherical disc to control the flow between\npipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-\nshaped disc is in line with the inlet and outlet of the valve and is blocked\nwhen the ball is horizontally swiveled 90 degrees, so that the hole of the\nball is perpendicular to the opening of the valve. Ball valves can be referred\nto as full port or reduced port (also known as regular or standard port)\ndepending on the inner diameter or the valve. A ball valve is full port if the\nhole of the ball is the same size as the inner diameter of the connecting\npipeline (resulting in lower friction) and termed reduced port if the hole of\nthe valve is one pipe size smaller than the pipe, resulting in less flow\nthrough the valve than through the shaft of the pipe. Ball valves may have a\nhandle or lever that aligns with the ball’s position (open or closed) for\nmanual operation. They are primarily used in air, gas, liquid, and steam\napplications. Valterra Products manufactures and distributes valves, hoses,\nsewer systems, and pool and spa products. The company, founded in 1981, is\nheadquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eMaximum operating pressure rating of 150 ps\u003c\/li\u003e\n \u003cli\u003eInline valve for connecting two pipes going in the same direction\u003c\/li\u003e\n \u003cli\u003e2\" female slip connections\u003c\/li\u003e\n \u003cli\u003eSuitable for residential, commercial, industrial, and agricultural use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-14T18:52:32+10:00","created_at":"2022-05-14T18:52:34+10:00","vendor":"Valterra","type":"Ball Valves","tags":["industrial"],"price":13100,"price_min":13100,"price_max":13100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41496384274612,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000PR3FF0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 700-20 PVC Ball Valve, White, 2\" Slip","public_title":null,"options":["Default Title"],"price":13100,"weight":520,"compare_at_price":null,"inventory_management":null,"barcode":"019079707000","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FF0.jpg?v=1652596085","\/\/auspowers.com\/cdn\/shop\/products\/41xrznNYajL.jpg?v=1652518355"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FF0.jpg?v=1652596085","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 700-20 PVC Ball Valve, White, 2\" Slip ","id":25867623989428,"position":1,"preview_image":{"aspect_ratio":1.212,"height":990,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FF0.jpg?v=1652596085"},"aspect_ratio":1.212,"height":990,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000PR3FF0.jpg?v=1652596085","width":1200},{"alt":"[Australia - AusPower] - Valterra 700-20 PVC Ball Valve, White, 2\" Slip ","id":25860839145652,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41xrznNYajL.jpg?v=1652518355"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41xrznNYajL.jpg?v=1652518355","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 700-20 PVC Ball Valve, White, 2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Valterra 700-20 ball valve is made of white schedule 40 PVC (polyvinyl\nchloride) for strength and resistance to corrosion and mild chemicals, and is\nsuitable for use as an inline valve for connecting two pipes going in the same\ndirection. It has a maximum operating pressure of 150 pounds per square inch\n(psi), and two 2\" female slip connections. This ball valve is suitable for use\nwith landscape and irrigation, pool and spa, aquaculture, and general purpose\napplications. Ball valves use a spherical disc to control the flow between\npipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-\nshaped disc is in line with the inlet and outlet of the valve and is blocked\nwhen the ball is horizontally swiveled 90 degrees, so that the hole of the\nball is perpendicular to the opening of the valve. Ball valves can be referred\nto as full port or reduced port (also known as regular or standard port)\ndepending on the inner diameter or the valve. A ball valve is full port if the\nhole of the ball is the same size as the inner diameter of the connecting\npipeline (resulting in lower friction) and termed reduced port if the hole of\nthe valve is one pipe size smaller than the pipe, resulting in less flow\nthrough the valve than through the shaft of the pipe. Ball valves may have a\nhandle or lever that aligns with the ball’s position (open or closed) for\nmanual operation. They are primarily used in air, gas, liquid, and steam\napplications. Valterra Products manufactures and distributes valves, hoses,\nsewer systems, and pool and spa products. The company, founded in 1981, is\nheadquartered in Mission Hills, CA.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eSchedule 40 PVC construction for strength and resistance to corrosion and mild chemicals\u003c\/li\u003e\n \u003cli\u003eMaximum operating pressure rating of 150 ps\u003c\/li\u003e\n \u003cli\u003eInline valve for connecting two pipes going in the same direction\u003c\/li\u003e\n \u003cli\u003e2\" female slip connections\u003c\/li\u003e\n \u003cli\u003eSuitable for residential, commercial, industrial, and agricultural use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7137817493684,"title":"Valterra 7101 ABS Gate Valve, Black, 1-1\/2\" Slip","handle":"valterra-7101-abs-gate-valve-black-1-1-2-slip","description":"\u003ch3\u003eValterra 7101 ABS Gate Valve, Black, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis type of slide gate valve was originally designed for draining tanks and\ncontrolling shallow bodies of water like ponds and lagoons. They can also be\nused as shut off valves in low pressure or vacuum air lines. Please note that\neach valve size has an open and closed pressure rating. Because the plastic\npaddle can flex with flowing water they are not good for throttling water or\ntrying to close the valve with fast moving water – thus the low mid flow cut\noff water pressure of approximately 6 pounds per square inch (psi). These\nslide valves are sometimes referred to as “knife or guillotine” gate valves\nand are a great alternative to ball valves in low pressure applications since\nthey are full flow, quick opening, and are generally a much lower cost\nespecially in larger sizes. They work well with soft debris like waste but\nsmall hard debris can settle in the bottom of the valve seat\/slot and prevent\nit from closing completely. They can easily be cleaned or repaired by\nunbolting and replacing the seals or valve body. The handles simply unscrew\nfor easy replacement – if you do so be sure not to damage the valve shaft.\nExtension rods are available for remote actuation. The Valterra 7101 gate\nvalve has 1-1\/2\" Schedule 40 female slip fittings which receive 1-1\/2\" pipe.\nBlack acrylonitrile butadiene styrene (ABS) body and hub fittings are\nresistant to corrosion and mild chemicals as are the polypropolene (PP) paddle\nand thermoplastic vulcanizate (TPV) seals. The valve shaft is made of 304\nstainless steel. Hardware is zinc plated steel. It has a maximum pressure\nrating of 45 psi in the closed position, 30 psi in the open position, and a\nmid-flow maximum closing pressure rating of 6 psi. The maximum temperature\nrating is 205 degrees F (96 degrees C). See Gate Valve Measurement chart for\ndimensions and Head Pressure chart for determining the pressure based on the\nheight of water being held back.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off for liquids.\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full port opening - Simple push\/pull operation\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Maximum Pressure - 30 psi Open\/45 psi Closed, Schedule 40 ABS Slip fittings\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Replaceable body, seals and handle\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-19T23:41:03+10:00","created_at":"2022-05-19T23:41:06+10:00","vendor":"Valterra","type":"Gate Valves","tags":["industrial"],"price":13000,"price_min":13000,"price_max":13000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41509479809204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B005OTLK24","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 7101 ABS Gate Valve, Black, 1-1\/2\" Slip","public_title":null,"options":["Default Title"],"price":13000,"weight":249,"compare_at_price":null,"inventory_management":null,"barcode":"019079071019","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B005OTLK24.jpg?v=1653030100","\/\/auspowers.com\/cdn\/shop\/products\/51Gj2vwEXyL.jpg?v=1652967666"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B005OTLK24.jpg?v=1653030100","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 7101 ABS Gate Valve, Black, 1-1\/2\" Slip ","id":25915343438004,"position":1,"preview_image":{"aspect_ratio":0.572,"height":1200,"width":686,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B005OTLK24.jpg?v=1653030100"},"aspect_ratio":0.572,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B005OTLK24.jpg?v=1653030100","width":686},{"alt":"[Australia - AusPower] - Valterra 7101 ABS Gate Valve, Black, 1-1\/2\" Slip ","id":25908652048564,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51Gj2vwEXyL.jpg?v=1652967666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51Gj2vwEXyL.jpg?v=1652967666","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 7101 ABS Gate Valve, Black, 1-1\/2\" Slip\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis type of slide gate valve was originally designed for draining tanks and\ncontrolling shallow bodies of water like ponds and lagoons. They can also be\nused as shut off valves in low pressure or vacuum air lines. Please note that\neach valve size has an open and closed pressure rating. Because the plastic\npaddle can flex with flowing water they are not good for throttling water or\ntrying to close the valve with fast moving water – thus the low mid flow cut\noff water pressure of approximately 6 pounds per square inch (psi). These\nslide valves are sometimes referred to as “knife or guillotine” gate valves\nand are a great alternative to ball valves in low pressure applications since\nthey are full flow, quick opening, and are generally a much lower cost\nespecially in larger sizes. They work well with soft debris like waste but\nsmall hard debris can settle in the bottom of the valve seat\/slot and prevent\nit from closing completely. They can easily be cleaned or repaired by\nunbolting and replacing the seals or valve body. The handles simply unscrew\nfor easy replacement – if you do so be sure not to damage the valve shaft.\nExtension rods are available for remote actuation. The Valterra 7101 gate\nvalve has 1-1\/2\" Schedule 40 female slip fittings which receive 1-1\/2\" pipe.\nBlack acrylonitrile butadiene styrene (ABS) body and hub fittings are\nresistant to corrosion and mild chemicals as are the polypropolene (PP) paddle\nand thermoplastic vulcanizate (TPV) seals. The valve shaft is made of 304\nstainless steel. Hardware is zinc plated steel. It has a maximum pressure\nrating of 45 psi in the closed position, 30 psi in the open position, and a\nmid-flow maximum closing pressure rating of 6 psi. The maximum temperature\nrating is 205 degrees F (96 degrees C). See Gate Valve Measurement chart for\ndimensions and Head Pressure chart for determining the pressure based on the\nheight of water being held back.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eAPPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off for liquids.\u003c\/li\u003e\n \u003cli\u003eKEY FEATURES: Unrestricted flow - Full port opening - Simple push\/pull operation\u003c\/li\u003e\n \u003cli\u003eSPECIFICATIONS: Maximum Pressure - 30 psi Open\/45 psi Closed, Schedule 40 ABS Slip fittings\u003c\/li\u003e\n \u003cli\u003eREPAIRS: Replaceable body, seals and handle\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7136005292212,"title":"Valterra 7201M ABS Gate Valve, Black, 2\" Slip, with Metal Handle","handle":"valterra-7201m-abs-gate-valve-black-2-slip-with-metal-handle","description":"\u003ch3\u003eValterra 7201M ABS Gate Valve, Black, 2\" Slip, with Metal Handle\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUnrestricted flow, simple push\/pull operation, ideal for quick shut-off.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage dimensions: 8.636 cms L x 18.796 cms W x 10.16 cms H\u003c\/li\u003e\n \u003cli\u003ePackage Quantity: 1\u003c\/li\u003e\n \u003cli\u003eProduct Type: VALVE\u003c\/li\u003e\n \u003cli\u003eCountry Of Origin: Mexico\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-05-17T23:00:33+10:00","created_at":"2022-05-17T23:00:34+10:00","vendor":"Valterra","type":"Gate Valves","tags":["industrial"],"price":15400,"price_min":15400,"price_max":15400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41502360993972,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00B95QAFE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Valterra 7201M ABS Gate Valve, Black, 2\" Slip, with Metal Handle","public_title":null,"options":["Default Title"],"price":15400,"weight":308,"compare_at_price":null,"inventory_management":null,"barcode":"0019079720122","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00B95QAFE.jpg?v=1652860298"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95QAFE.jpg?v=1652860298","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Valterra 7201M ABS Gate Valve, Black, 2\" Slip, with Metal Handle ","id":25893669306548,"position":1,"preview_image":{"aspect_ratio":0.563,"height":1200,"width":676,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95QAFE.jpg?v=1652860298"},"aspect_ratio":0.563,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00B95QAFE.jpg?v=1652860298","width":676}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eValterra 7201M ABS Gate Valve, Black, 2\" Slip, with Metal Handle\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUnrestricted flow, simple push\/pull operation, ideal for quick shut-off.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage dimensions: 8.636 cms L x 18.796 cms W x 10.16 cms H\u003c\/li\u003e\n \u003cli\u003ePackage Quantity: 1\u003c\/li\u003e\n \u003cli\u003eProduct Type: VALVE\u003c\/li\u003e\n \u003cli\u003eCountry Of Origin: Mexico\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}