DORHEA

{"id":7085131104436,"title":"4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro","handle":"4pcs-3d-printer-stepper-motor-driver-tmc2208-v1-2-stepstick-stepper-driver-module-carrier-with-heat-sink-screwdriver-for-3d-printer-controller-boards-ramps-1-4-mks-gen-mega-i3-ender-3-pro","description":"\u003ch3\u003e4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: Interface: Step\/Dir Configuration: CFG Pins or UART Native\nMicrosteps: up to 1\/256 MicroPlyer Microsteps: 1\/256 Logic Voltage (VIO): 3-5V\nMotor Voltage (VM): 4.75-36V Motor Phase Current max: 1.2A RMS, 2.0A Peak.\nTherefore, the reference voltage of the driver module should not exceed 1V. At\nthe same time, the driver module must be dissipated, otherwise it will affect\nthe life of the driver module. Note: TMC2208 driver needs extra fan to cool\nit, otherwise the high temperature may destroy it. Do not connect the motor\nwhen measuring the voltage, otherwise it is easy to burn the driver. Power\nshould be connected when measuring voltage, do not just connect USB power\nsupply. Package Includes: 4 X TMC2208 Driver 4 X Heat Sink 1 X Screwdriver\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.\u003c\/li\u003e\n \u003cli\u003eThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.\u003c\/li\u003e\n \u003cli\u003eWith this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.\u003c\/li\u003e\n \u003cli\u003eThe adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-17T15:52:47+11:00","created_at":"2022-03-17T15:52:47+11:00","vendor":"DORHEA","type":"3D Printer Interface \u0026 Driver Modules","tags":["auspowers_batchone"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41331600359604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08DFVD4LL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro","public_title":null,"options":["Default Title"],"price":11400,"weight":41,"compare_at_price":null,"inventory_management":null,"barcode":"0701715439627","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08DFVD4LL.jpg?v=1648522246","\/\/auspowers.com\/cdn\/shop\/products\/61dBTWEZhoL.jpg?v=1647492767","\/\/auspowers.com\/cdn\/shop\/products\/61l2is543qL.jpg?v=1647492767","\/\/auspowers.com\/cdn\/shop\/products\/51WvDLdL_YL.jpg?v=1647492767","\/\/auspowers.com\/cdn\/shop\/products\/61UH9J1F2LL.jpg?v=1647492767","\/\/auspowers.com\/cdn\/shop\/products\/51FpZyqk0NS.jpg?v=1647492767","\/\/auspowers.com\/cdn\/shop\/products\/61FxwynHSFL.jpg?v=1647492767"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08DFVD4LL.jpg?v=1648522246","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25341008937140,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08DFVD4LL.jpg?v=1648522246"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08DFVD4LL.jpg?v=1648522246","width":1001},{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25186067841204,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61dBTWEZhoL.jpg?v=1647492767"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61dBTWEZhoL.jpg?v=1647492767","width":1001},{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25186067906740,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61l2is543qL.jpg?v=1647492767"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61l2is543qL.jpg?v=1647492767","width":1001},{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25186067939508,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51WvDLdL_YL.jpg?v=1647492767"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51WvDLdL_YL.jpg?v=1647492767","width":1001},{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25186067972276,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UH9J1F2LL.jpg?v=1647492767"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UH9J1F2LL.jpg?v=1647492767","width":1001},{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25186068005044,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51FpZyqk0NS.jpg?v=1647492767"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51FpZyqk0NS.jpg?v=1647492767","width":1001},{"alt":"[Australia - AusPower] - 4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro ","id":25186068037812,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61FxwynHSFL.jpg?v=1647492767"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61FxwynHSFL.jpg?v=1647492767","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e4PCS 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: Interface: Step\/Dir Configuration: CFG Pins or UART Native\nMicrosteps: up to 1\/256 MicroPlyer Microsteps: 1\/256 Logic Voltage (VIO): 3-5V\nMotor Voltage (VM): 4.75-36V Motor Phase Current max: 1.2A RMS, 2.0A Peak.\nTherefore, the reference voltage of the driver module should not exceed 1V. At\nthe same time, the driver module must be dissipated, otherwise it will affect\nthe life of the driver module. Note: TMC2208 driver needs extra fan to cool\nit, otherwise the high temperature may destroy it. Do not connect the motor\nwhen measuring the voltage, otherwise it is easy to burn the driver. Power\nshould be connected when measuring voltage, do not just connect USB power\nsupply. Package Includes: 4 X TMC2208 Driver 4 X Heat Sink 1 X Screwdriver\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.\u003c\/li\u003e\n \u003cli\u003eThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.\u003c\/li\u003e\n \u003cli\u003eWith this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.\u003c\/li\u003e\n \u003cli\u003eThe adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7164457353396,"title":"5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car","handle":"5pcs-bts7960-dc-stepper-motor-driver-module-43a-current-limit-control-module-h-bridge-pwm-smart-car-board-compatible-with-ar-duino-raspberry-pi-smart-car","description":"\u003ch3\u003e5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eMaximum current: 43A Input level: 3.3-5V 5V isolated with MCU, and effectively\nprotect MCU 5V power indicator on board Voltage indication of motor driver\noutput side Can solder heat sink Just need four lines from the MCU to driver\nmodule (GND, 5V,PWM1, PWM2) Control method: PWM or level Input Port: RPWM:\nforward level or PWM signal input, active high LPWM: Reverse level or PWM\nsignal input, active high R_EN: forward drive enable input, high-level enable,\nlow level off L_EN: Reverse drive enable input, high-level enable, low level\noff R_IS: forward drive current alarm output L_IS: Reverse drive current alarm\noutput VCC: +5 V power output, 5V power supply connection with the\nmicrocontroller GND: signal common low end Package included: 5 x BTS7960 motor\ndrive module\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eBTS7960 large current (43 A) H bridge driver, 5V power indicator on board; 5V isolate with MCU, and effectively protect MCU.\u003c\/li\u003e\n \u003cli\u003eMotor driver module isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.\u003c\/li\u003e\n \u003cli\u003eVoltage indication of motor driver output end; can solder heat sink.\u003c\/li\u003e\n \u003cli\u003eBTS7960 able to reverse the motor forward, two PWM input frequency up to 25kHZ.\u003c\/li\u003e\n \u003cli\u003eHigh power motor driver module just need four lines from MCU to driver module (GN\/ 5V\/ PWM1\/PWM2), two heat flow passing through an error signal output.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-06-22T06:17:49+10:00","created_at":"2022-06-22T06:17:56+10:00","vendor":"DORHEA","type":"Controls","tags":["industrial"],"price":17000,"price_min":17000,"price_max":17000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41597895344308,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B098X4SJR8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car","public_title":null,"options":["Default Title"],"price":17000,"weight":340,"compare_at_price":null,"inventory_management":null,"barcode":"0701715472099","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B098X4SJR8.jpg?v=1655882647","\/\/auspowers.com\/cdn\/shop\/products\/71w6qtDu77L.jpg?v=1655842676","\/\/auspowers.com\/cdn\/shop\/products\/71lQ_HpWdUL.jpg?v=1655842676","\/\/auspowers.com\/cdn\/shop\/products\/71596_CWEyL.jpg?v=1655842676","\/\/auspowers.com\/cdn\/shop\/products\/61CTq5IPZkL.jpg?v=1655842676","\/\/auspowers.com\/cdn\/shop\/products\/71LH36g3MnL.jpg?v=1655842676"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B098X4SJR8.jpg?v=1655882647","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car ","id":26241991573684,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B098X4SJR8.jpg?v=1655882647"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B098X4SJR8.jpg?v=1655882647","width":1600},{"alt":"[Australia - AusPower] - 5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car ","id":26235215610036,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71w6qtDu77L.jpg?v=1655842676"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71w6qtDu77L.jpg?v=1655842676","width":1500},{"alt":"[Australia - AusPower] - 5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car ","id":26235215642804,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71lQ_HpWdUL.jpg?v=1655842676"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71lQ_HpWdUL.jpg?v=1655842676","width":1500},{"alt":"[Australia - AusPower] - 5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car ","id":26235215675572,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71596_CWEyL.jpg?v=1655842676"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71596_CWEyL.jpg?v=1655842676","width":1500},{"alt":"[Australia - AusPower] - 5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car ","id":26235215708340,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61CTq5IPZkL.jpg?v=1655842676"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61CTq5IPZkL.jpg?v=1655842676","width":1500},{"alt":"[Australia - AusPower] - 5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car ","id":26235215741108,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71LH36g3MnL.jpg?v=1655842676"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71LH36g3MnL.jpg?v=1655842676","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e5PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Ar duino Raspberry Pi Smart Car\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eMaximum current: 43A Input level: 3.3-5V 5V isolated with MCU, and effectively\nprotect MCU 5V power indicator on board Voltage indication of motor driver\noutput side Can solder heat sink Just need four lines from the MCU to driver\nmodule (GND, 5V,PWM1, PWM2) Control method: PWM or level Input Port: RPWM:\nforward level or PWM signal input, active high LPWM: Reverse level or PWM\nsignal input, active high R_EN: forward drive enable input, high-level enable,\nlow level off L_EN: Reverse drive enable input, high-level enable, low level\noff R_IS: forward drive current alarm output L_IS: Reverse drive current alarm\noutput VCC: +5 V power output, 5V power supply connection with the\nmicrocontroller GND: signal common low end Package included: 5 x BTS7960 motor\ndrive module\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eBTS7960 large current (43 A) H bridge driver, 5V power indicator on board; 5V isolate with MCU, and effectively protect MCU.\u003c\/li\u003e\n \u003cli\u003eMotor driver module isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.\u003c\/li\u003e\n \u003cli\u003eVoltage indication of motor driver output end; can solder heat sink.\u003c\/li\u003e\n \u003cli\u003eBTS7960 able to reverse the motor forward, two PWM input frequency up to 25kHZ.\u003c\/li\u003e\n \u003cli\u003eHigh power motor driver module just need four lines from MCU to driver module (GN\/ 5V\/ PWM1\/PWM2), two heat flow passing through an error signal output.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7807384912052,"title":"5Pcs TMC2208 3D Printer Stepper Motor Driver, DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro 5PCS","handle":"5pcs-tmc2208-3d-printer-stepper-motor-driver-dorhea-tmc2208-v1-2-stepper-driver-module-with-heat-sink-screwdriver-for-3d-printer-controller-mother-boards-reprap-ramps1-4-mks-prusa-i3-ender-3-pro-5pcs","description":"\u003ch3\u003e5Pcs TMC2208 3D Printer Stepper Motor Driver, DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.\u003c\/li\u003e\n \u003cli\u003eThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.\u003c\/li\u003e\n \u003cli\u003eWith this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.\u003c\/li\u003e\n \u003cli\u003eThe adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2024-08-01T23:51:12+10:00","created_at":"2024-08-01T23:51:12+10:00","vendor":"DORHEA","type":"3D Printer Interface \u0026 Driver Modules","tags":["industrial_Aug2024_update"],"price":11800,"price_min":11800,"price_max":11800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43449048662196,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B082LSQWZF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5Pcs TMC2208 3D Printer Stepper Motor Driver, DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro 5PCS","public_title":null,"options":["Default Title"],"price":11800,"weight":45,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/files\/B082LSQWZF.jpg?v=1722580966","\/\/auspowers.com\/cdn\/shop\/files\/61QfsT72F1L.jpg?v=1722520284","\/\/auspowers.com\/cdn\/shop\/files\/61EYG27VMqL.jpg?v=1722520284","\/\/auspowers.com\/cdn\/shop\/files\/51WvDLdL_YL.jpg?v=1722520284","\/\/auspowers.com\/cdn\/shop\/files\/41YraADWGBL.jpg?v=1722520284","\/\/auspowers.com\/cdn\/shop\/files\/51FpZyqk0NS.jpg?v=1722520285","\/\/auspowers.com\/cdn\/shop\/files\/51S-uMnSUSL.jpg?v=1722520285"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/files\/B082LSQWZF.jpg?v=1722580966","options":["Title"],"media":[{"alt":null,"id":30556361228468,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/files\/B082LSQWZF.jpg?v=1722580966"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/B082LSQWZF.jpg?v=1722580966","width":1001},{"alt":null,"id":30552865570996,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/files\/61QfsT72F1L.jpg?v=1722520284"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/61QfsT72F1L.jpg?v=1722520284","width":1001},{"alt":null,"id":30552865603764,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/files\/61EYG27VMqL.jpg?v=1722520284"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/61EYG27VMqL.jpg?v=1722520284","width":1001},{"alt":null,"id":30552865636532,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/files\/51WvDLdL_YL.jpg?v=1722520284"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/51WvDLdL_YL.jpg?v=1722520284","width":1001},{"alt":null,"id":30552865669300,"position":5,"preview_image":{"aspect_ratio":1.374,"height":364,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/files\/41YraADWGBL.jpg?v=1722520284"},"aspect_ratio":1.374,"height":364,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/41YraADWGBL.jpg?v=1722520284","width":500},{"alt":null,"id":30552865702068,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/files\/51FpZyqk0NS.jpg?v=1722520285"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/51FpZyqk0NS.jpg?v=1722520285","width":1001},{"alt":null,"id":30552865734836,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/files\/51S-uMnSUSL.jpg?v=1722520285"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/51S-uMnSUSL.jpg?v=1722520285","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e5Pcs TMC2208 3D Printer Stepper Motor Driver, DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.\u003c\/li\u003e\n \u003cli\u003eThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.\u003c\/li\u003e\n \u003cli\u003eWith this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.\u003c\/li\u003e\n \u003cli\u003eThe adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7245171196084,"title":"5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102","handle":"5pcs-usb-uart-6-in-1-multifunctional-converter-usb-ttl-rs485-232-ttl-rs232-485-232-to-485-serial-adapter-3-3v-5v-universal-adapter-module-with-cp2102","description":" \u003ch1\u003e5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102\u003c\/h1\u003e\n \u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n \u003cp\u003eSpecification: USB to TTL 232 485 serial converter USB TTL 232 485 can freely\nconvert to each other Stable and reliable chipset: CP2102 USB specification\n2.0 compliant with full-speed 12Mbps Standard USB type A male and TTL(TXD RXD)\n232(232T 232R) 485(A B) 3.3V 5V All handshaking and modem interface signals\nBaud rates: 300 bps to 1.5 Mbps Event character support Line break\ntransmission Temperature Range: -40℃ to +85℃ Supports Windows 98SE, 2000, XP,\nVista, Window7, Mac OS 9, Mac OS X \u0026amp; Linux 2.40 Package Included: 5 x 6-In-1\nmultifunctiona USB to UART serial module\u003c\/p\u003e\n \u003cp\u003eFeatures:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e6-in-1 multifunctional serial adater supports usb-ttl, usb-rs232, usb-rs485, ttl-232, ttl-485, 232-485 converting function, freely convert to each other.\u003c\/li\u003e\n\u003cli\u003eEquipped with superior-quality mode switch(endurable), status indicating LED(easy to connect), upgraded TO5 fuse , CP2102 chipset , Baud rates: 300 bps to 1.5 Mbps; Power Output:This module can be powered through to the microcontroller system to facilitate debugging.5V-500ma or 3.3V-100ma.\u003c\/li\u003e\n\u003cli\u003eTransceiver indicator:When the serial line to send or receive data lines, the board will receive indicator lights for easy debugging; TTL level interface:can be directly connected microcontroller or other embedded devices, such as 51, STC, AVR, ARM, FPGA, etc. without conversion\u003c\/li\u003e\n\u003cli\u003eMultifunction USB converter board fully supports Win8, Win7, WinXp, Win2K, WinCE, Linux, Mac systems, 32-bit, 64-bit systems .\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection:Onboard resettable fuse, even if the positive and negative short-circuit will not damage the circuit board or computer.If there is a short circuit or current exceeds 500mA, the fuse will automatically disconnect, to be short-circuited fuse circuit to restore non-normal. Effectively protect the security of your computer.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n ","published_at":"2022-09-01T03:40:46+10:00","created_at":"2022-09-01T03:40:55+10:00","vendor":"DORHEA","type":"Serial Adapters","tags":["electronics3"],"price":12700,"price_min":12700,"price_max":12700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41815225761972,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B09PDKQJ7W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102","public_title":null,"options":["Default Title"],"price":12700,"weight":50,"compare_at_price":null,"inventory_management":null,"barcode":"13031-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B09PDKQJ7W.jpg?v=1662014526","\/\/auspowers.com\/cdn\/shop\/products\/718_NpLR-EL.jpg?v=1661967655","\/\/auspowers.com\/cdn\/shop\/products\/7139een53IL.jpg?v=1661967655","\/\/auspowers.com\/cdn\/shop\/products\/71XnZoX2fWL.jpg?v=1661967655","\/\/auspowers.com\/cdn\/shop\/products\/71CL3ESRkVL.jpg?v=1661967655","\/\/auspowers.com\/cdn\/shop\/products\/6142w5s8rPL.jpg?v=1661967655","\/\/auspowers.com\/cdn\/shop\/products\/619KNNDJPbL.jpg?v=1661967655"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B09PDKQJ7W.jpg?v=1662014526","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27013508202676,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B09PDKQJ7W.jpg?v=1662014526"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B09PDKQJ7W.jpg?v=1662014526","width":1601},{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27005670883508,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/718_NpLR-EL.jpg?v=1661967655"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/718_NpLR-EL.jpg?v=1661967655","width":1601},{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27005670916276,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/7139een53IL.jpg?v=1661967655"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/7139een53IL.jpg?v=1661967655","width":1601},{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27005670949044,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71XnZoX2fWL.jpg?v=1661967655"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71XnZoX2fWL.jpg?v=1661967655","width":1601},{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27005670981812,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71CL3ESRkVL.jpg?v=1661967655"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71CL3ESRkVL.jpg?v=1661967655","width":1601},{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27005671014580,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/6142w5s8rPL.jpg?v=1661967655"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/6142w5s8rPL.jpg?v=1661967655","width":1601},{"alt":"[Australia - AusPower] - 5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102 ","id":27005671047348,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/619KNNDJPbL.jpg?v=1661967655"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/619KNNDJPbL.jpg?v=1661967655","width":1601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" \u003ch1\u003e5Pcs USB-UART 6-in-1 Multifunctional Converter USB-TTL\/RS485\/232,TTL-RS232\/485,232 to 485 Serial Adapter 3.3V \/ 5V Universal Adapter Module with CP2102\u003c\/h1\u003e\n \u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n \u003cp\u003eSpecification: USB to TTL 232 485 serial converter USB TTL 232 485 can freely\nconvert to each other Stable and reliable chipset: CP2102 USB specification\n2.0 compliant with full-speed 12Mbps Standard USB type A male and TTL(TXD RXD)\n232(232T 232R) 485(A B) 3.3V 5V All handshaking and modem interface signals\nBaud rates: 300 bps to 1.5 Mbps Event character support Line break\ntransmission Temperature Range: -40℃ to +85℃ Supports Windows 98SE, 2000, XP,\nVista, Window7, Mac OS 9, Mac OS X \u0026amp; Linux 2.40 Package Included: 5 x 6-In-1\nmultifunctiona USB to UART serial module\u003c\/p\u003e\n \u003cp\u003eFeatures:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003e6-in-1 multifunctional serial adater supports usb-ttl, usb-rs232, usb-rs485, ttl-232, ttl-485, 232-485 converting function, freely convert to each other.\u003c\/li\u003e\n\u003cli\u003eEquipped with superior-quality mode switch(endurable), status indicating LED(easy to connect), upgraded TO5 fuse , CP2102 chipset , Baud rates: 300 bps to 1.5 Mbps; Power Output:This module can be powered through to the microcontroller system to facilitate debugging.5V-500ma or 3.3V-100ma.\u003c\/li\u003e\n\u003cli\u003eTransceiver indicator:When the serial line to send or receive data lines, the board will receive indicator lights for easy debugging; TTL level interface:can be directly connected microcontroller or other embedded devices, such as 51, STC, AVR, ARM, FPGA, etc. without conversion\u003c\/li\u003e\n\u003cli\u003eMultifunction USB converter board fully supports Win8, Win7, WinXp, Win2K, WinCE, Linux, Mac systems, 32-bit, 64-bit systems .\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection:Onboard resettable fuse, even if the positive and negative short-circuit will not damage the circuit board or computer.If there is a short circuit or current exceeds 500mA, the fuse will automatically disconnect, to be short-circuited fuse circuit to restore non-normal. Effectively protect the security of your computer.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n "}

{"id":7086009450676,"title":"6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro","handle":"6pcs-3d-printer-tmc2208-v1-2-stepper-motor-driver-tmc2208-stepstick-stepper-motor-driver-module-with-heat-sink-screwdriver-for-3d-printer-controller-boards-reprap-ramps1-4-mks-gen-ender-3-pro","description":"\u003ch3\u003e6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: Interface: Step\/Dir Configuration: CFG Pins or UART Native\nMicrosteps: up to 1\/256 MicroPlyer Microsteps: 1\/256 Logic Voltage (VIO): 3-5V\nMotor Voltage (VM): 4.75-36V Motor Phase Current max: 1.2A RMS, 2.0A Peak.\nTherefore, the reference voltage of the driver module should not exceed 1V. At\nthe same time, the driver module must be dissipated, otherwise it will affect\nthe life of the driver module. Note: TMC2208 driver needs extra fan to cool\nit, otherwise the high temperature may destroy it. Do not connect the motor\nwhen measuring the voltage, otherwise it is easy to burn the driver. Power\nshould be connected when measuring voltage, do not just connect USB power\nsupply. Package Includes: 6 X TMC2208 Driver 6 X Heat Sink 1 X Screwdriver\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.\u003c\/li\u003e\n \u003cli\u003eThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.\u003c\/li\u003e\n \u003cli\u003eWith this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.\u003c\/li\u003e\n \u003cli\u003eThe adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T17:03:19+11:00","created_at":"2022-03-18T17:03:19+11:00","vendor":"DORHEA","type":"3D Printer Interface \u0026 Driver Modules","tags":["auspowers_batchone"],"price":13400,"price_min":13400,"price_max":13400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333802631348,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08DFW14YB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro","public_title":null,"options":["Default Title"],"price":13400,"weight":59,"compare_at_price":null,"inventory_management":null,"barcode":"0701715439634","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08DFW14YB.jpg?v=1648552964","\/\/auspowers.com\/cdn\/shop\/products\/61m7lzy07wL.jpg?v=1647583399","\/\/auspowers.com\/cdn\/shop\/products\/71dQhCrsm6L.jpg?v=1647583399","\/\/auspowers.com\/cdn\/shop\/products\/61EYG27VMqL.jpg?v=1647583399","\/\/auspowers.com\/cdn\/shop\/products\/61UH9J1F2LL_9bb7fd61-27e0-4b68-bd26-b35e30b70f17.jpg?v=1647583399","\/\/auspowers.com\/cdn\/shop\/products\/61FxwynHSFL_e57e56ac-1562-409a-b589-1d70106d1c5f.jpg?v=1647583399","\/\/auspowers.com\/cdn\/shop\/products\/51FpZyqk0NS_cc2ab96f-ee29-40e3-99a0-ffce791df2f5.jpg?v=1647583399"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08DFW14YB.jpg?v=1648552964","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25345751515316,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08DFW14YB.jpg?v=1648552964"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08DFW14YB.jpg?v=1648552964","width":1001},{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25200357408948,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61m7lzy07wL.jpg?v=1647583399"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61m7lzy07wL.jpg?v=1647583399","width":1001},{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25200357441716,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71dQhCrsm6L.jpg?v=1647583399"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71dQhCrsm6L.jpg?v=1647583399","width":1001},{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25200357474484,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61EYG27VMqL.jpg?v=1647583399"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61EYG27VMqL.jpg?v=1647583399","width":1001},{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25200357507252,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UH9J1F2LL_9bb7fd61-27e0-4b68-bd26-b35e30b70f17.jpg?v=1647583399"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UH9J1F2LL_9bb7fd61-27e0-4b68-bd26-b35e30b70f17.jpg?v=1647583399","width":1001},{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25200357540020,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61FxwynHSFL_e57e56ac-1562-409a-b589-1d70106d1c5f.jpg?v=1647583399"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61FxwynHSFL_e57e56ac-1562-409a-b589-1d70106d1c5f.jpg?v=1647583399","width":1001},{"alt":"[Australia - AusPower] - 6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro ","id":25200357572788,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51FpZyqk0NS_cc2ab96f-ee29-40e3-99a0-ffce791df2f5.jpg?v=1647583399"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51FpZyqk0NS_cc2ab96f-ee29-40e3-99a0-ffce791df2f5.jpg?v=1647583399","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: Interface: Step\/Dir Configuration: CFG Pins or UART Native\nMicrosteps: up to 1\/256 MicroPlyer Microsteps: 1\/256 Logic Voltage (VIO): 3-5V\nMotor Voltage (VM): 4.75-36V Motor Phase Current max: 1.2A RMS, 2.0A Peak.\nTherefore, the reference voltage of the driver module should not exceed 1V. At\nthe same time, the driver module must be dissipated, otherwise it will affect\nthe life of the driver module. Note: TMC2208 driver needs extra fan to cool\nit, otherwise the high temperature may destroy it. Do not connect the motor\nwhen measuring the voltage, otherwise it is easy to burn the driver. Power\nshould be connected when measuring voltage, do not just connect USB power\nsupply. Package Includes: 6 X TMC2208 Driver 6 X Heat Sink 1 X Screwdriver\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.\u003c\/li\u003e\n \u003cli\u003eThe flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.\u003c\/li\u003e\n \u003cli\u003eWith this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.\u003c\/li\u003e\n \u003cli\u003eThe adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7889858822324,"title":"6Pcs TP5100 Charge Management Power Module 2A Charging Board Voltage Regulator Lithium Battery Charge Board Compatible with 4.2V 8.4V Single and Double Lithium Batteries","handle":"6pcs-tp5100-charge-management-power-module-2a-charging-board-voltage-regulator-lithium-battery-charge-board-compatible-with-4-2v-8-4v-single-and-double-lithium-batteries","description":"\u003ch3\u003e6Pcs TP5100 Charge Management Power Module 2A Charging Board Voltage Regulator Lithium Battery Charge Board Compatible with 4.2V 8.4V Single and Double Lithium Batteries\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDouble \/ single 8.4V \/ 4.2V lithium battery charging Programmable charging\ncurrent, 0.1A - 2A Programmable pre-charge current, 10% - 100% Wide operating\nvoltage, up to 18V Red and green LED charging status indication Chip\ntemperature protection, over current protection, under voltage protection,\nbattery temperature protection, battery reverse shutdown, short circuit\nprotection Switching frequency 400KHz, available inductor 20uH and above\nPWR_ON - Power supply, battery supply switching control less than 1% of the\ncharging voltage control accuracy Trickle, constant current, constant voltage\nthree-stage charging to protect the battery Static input power supply voltage\n(VIN) : 20V BAT: -8.4V ~ 20V BAT short-circuit duration: continuous Maximum\njunction temperature?120? Operating ambient temperature range?-40?~85? Storage\ntemperature range?-65?~125? Pin temperature (soldering time 10 seconds): 260?\nApplications: Portable devices, various chargers, MP4, MP5 players, tablet\nPCs, model airplanes, power tools, walkie-talkies Package include: 6 x TP5100\nmodule\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDouble 8.4v \/ 4.2v lithium rechargeable single. Input voltage: 5-18V DC power supply (actual 5-12V is appropriate); Current: 1A-2A\u003c\/li\u003e\n \u003cli\u003eThe TP5100 is a switching step-down dual-cell 8.4V\/single-cell 4.2V Li-ion battery charge management module.\u003c\/li\u003e\n \u003cli\u003eThe TP5100 has a wide input voltage range of 5V-18V and charges the battery in three stages: trickle pre-charge, constant current, and constant voltage. The trickle pre-charge current and constant current charge current are adjusted by external resistors, and the maximum charge current is up to 2A.\u003c\/li\u003e\n \u003cli\u003eTP5100 has built-in input over-current and undervoltage protection, chip over-temperature protection, short-circuit protection, battery temperature monitoring, and battery reverse connection protection.\u003c\/li\u003e\n \u003cli\u003eTP5100 charging management power supply module suitable for portable devices, various chargers, smart phones, tablets, power tools, walkie-talkies, etc.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2024-11-20T09:36:32+11:00","created_at":"2024-11-20T02:28:26+11:00","vendor":"DORHEA","type":"Robot Accessories","tags":["industrial_Aug2024_update"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43727604449460,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0C78184C1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"6Pcs TP5100 Charge Management Power Module 2A Charging Board Voltage Regulator Lithium Battery Charge Board Compatible with 4.2V 8.4V Single and Double Lithium Batteries","public_title":null,"options":["Default Title"],"price":8000,"weight":18,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/files\/B0C78184C1.jpg?v=1732087508","\/\/auspowers.com\/cdn\/shop\/files\/61RL96-GuvL.jpg?v=1732030109","\/\/auspowers.com\/cdn\/shop\/files\/71YqEkzUOCL.jpg?v=1732030109","\/\/auspowers.com\/cdn\/shop\/files\/71fnAWVVx-L.jpg?v=1732030108","\/\/auspowers.com\/cdn\/shop\/files\/61N20nE2cGL.jpg?v=1732030108","\/\/auspowers.com\/cdn\/shop\/files\/61VcCamnEIL.jpg?v=1732030108"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/files\/B0C78184C1.jpg?v=1732087508","options":["Title"],"media":[{"alt":null,"id":30983183630516,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/files\/B0C78184C1.jpg?v=1732087508"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/B0C78184C1.jpg?v=1732087508","width":1601},{"alt":null,"id":30980534370484,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1300,"width":1300,"src":"\/\/auspowers.com\/cdn\/shop\/files\/61RL96-GuvL.jpg?v=1732030109"},"aspect_ratio":1.0,"height":1300,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/61RL96-GuvL.jpg?v=1732030109","width":1300},{"alt":null,"id":30980534403252,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/files\/71YqEkzUOCL.jpg?v=1732030109"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/71YqEkzUOCL.jpg?v=1732030109","width":1601},{"alt":null,"id":30980534436020,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/files\/71fnAWVVx-L.jpg?v=1732030108"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/71fnAWVVx-L.jpg?v=1732030108","width":1601},{"alt":null,"id":30980534468788,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1300,"width":1300,"src":"\/\/auspowers.com\/cdn\/shop\/files\/61N20nE2cGL.jpg?v=1732030108"},"aspect_ratio":1.0,"height":1300,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/61N20nE2cGL.jpg?v=1732030108","width":1300},{"alt":null,"id":30980534501556,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/files\/61VcCamnEIL.jpg?v=1732030108"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/61VcCamnEIL.jpg?v=1732030108","width":1601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e6Pcs TP5100 Charge Management Power Module 2A Charging Board Voltage Regulator Lithium Battery Charge Board Compatible with 4.2V 8.4V Single and Double Lithium Batteries\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDouble \/ single 8.4V \/ 4.2V lithium battery charging Programmable charging\ncurrent, 0.1A - 2A Programmable pre-charge current, 10% - 100% Wide operating\nvoltage, up to 18V Red and green LED charging status indication Chip\ntemperature protection, over current protection, under voltage protection,\nbattery temperature protection, battery reverse shutdown, short circuit\nprotection Switching frequency 400KHz, available inductor 20uH and above\nPWR_ON - Power supply, battery supply switching control less than 1% of the\ncharging voltage control accuracy Trickle, constant current, constant voltage\nthree-stage charging to protect the battery Static input power supply voltage\n(VIN) : 20V BAT: -8.4V ~ 20V BAT short-circuit duration: continuous Maximum\njunction temperature?120? Operating ambient temperature range?-40?~85? Storage\ntemperature range?-65?~125? Pin temperature (soldering time 10 seconds): 260?\nApplications: Portable devices, various chargers, MP4, MP5 players, tablet\nPCs, model airplanes, power tools, walkie-talkies Package include: 6 x TP5100\nmodule\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDouble 8.4v \/ 4.2v lithium rechargeable single. Input voltage: 5-18V DC power supply (actual 5-12V is appropriate); Current: 1A-2A\u003c\/li\u003e\n \u003cli\u003eThe TP5100 is a switching step-down dual-cell 8.4V\/single-cell 4.2V Li-ion battery charge management module.\u003c\/li\u003e\n \u003cli\u003eThe TP5100 has a wide input voltage range of 5V-18V and charges the battery in three stages: trickle pre-charge, constant current, and constant voltage. The trickle pre-charge current and constant current charge current are adjusted by external resistors, and the maximum charge current is up to 2A.\u003c\/li\u003e\n \u003cli\u003eTP5100 has built-in input over-current and undervoltage protection, chip over-temperature protection, short-circuit protection, battery temperature monitoring, and battery reverse connection protection.\u003c\/li\u003e\n \u003cli\u003eTP5100 charging management power supply module suitable for portable devices, various chargers, smart phones, tablets, power tools, walkie-talkies, etc.\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7085907083444,"title":"Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10","handle":"dorhea-10pcs-2gt-timing-belt-6mm-width-closed-loop-rubber-belt-100mm-110mm-112mm-122mm-158mm-190mm-200mm-280mm-300mm-400mm-width-6mm-timing-bel-for-3d-printer-motor-belt-10","description":"\u003ch3\u003eDorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e2GT pitch: 2mm Belt height: 1.52mm Tooth Height: 0.76mm Material: Neoprene\nrubber with fiberglass core Width: 6mm Shape: Closed loop Package include: 1 x\n3.93inch \/ 100mm timing belts 1 x 4.33inch \/ 110mm timing belts 1 x 4.27inch \/\n112mm timing belts 1 x 4.41inch \/ 122mm timing belts 1 x 6.22inch \/ 158mm\ntiming belts 1 x 7.48inch \/ 190mm timing belts 1 x 8.66inch \/ 200mm timing\nbelts 1 x 11inch \/ 280mm timing belts 1 x 11.8inch \/ 300mm timing belts 1 x\n15.75inch \/ 400mm timing belts\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe timing belt is made of rubber, which is strong and durable, designed for linear motion, high positioning accuracy; The round tooth profile ensures a smooth fit of the belt teeth.\u003c\/li\u003e\n \u003cli\u003e10 different model type, 1 x 3.93inch(100), 1 x 4.33inch(110mm),1 x 4.27inch(112mm), 1 x 4.41inch(122mm),1 x 6.22(158mm),1 x 7.48inch(190mm), 1 x 8.66inch(200mm), 1 x 11inch(280mm), 1 x 11.8inch(300mm), 1 x 15.75(400mm) timing belts for you in daily used, 3d printer parts.\u003c\/li\u003e\n \u003cli\u003e2GT system is an extension of the HTD system with greater load carrying capacity.\u003c\/li\u003e\n \u003cli\u003eTemperature range: -34C to +85C (-30F to +185F)\u003c\/li\u003e\n \u003cli\u003e2GT driver belt suitable for most kind of 3D printers, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders ect.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T15:01:37+11:00","created_at":"2022-03-18T15:01:37+11:00","vendor":"DORHEA","type":"Timing Belts","tags":["auspowers_batchone"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333576532148,"title":"10","option1":"10","option2":null,"option3":null,"sku":"B094XCG1YS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 - 10","public_title":"10","options":["10"],"price":8800,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"0701715471214","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B094XCG1YS.jpg?v=1648548819","\/\/auspowers.com\/cdn\/shop\/products\/61HUjuArqLS.jpg?v=1647576098","\/\/auspowers.com\/cdn\/shop\/products\/71E5SMIHKgS.jpg?v=1647576098","\/\/auspowers.com\/cdn\/shop\/products\/61LIt2itbpS.jpg?v=1647576098","\/\/auspowers.com\/cdn\/shop\/products\/616xcPo0ZHS.jpg?v=1647576098","\/\/auspowers.com\/cdn\/shop\/products\/71eimb4XYxS.jpg?v=1647576098"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B094XCG1YS.jpg?v=1648548819","options":["Number of Items"],"media":[{"alt":"[Australia - AusPower] - Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 ","id":25344894992564,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B094XCG1YS.jpg?v=1648548819"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B094XCG1YS.jpg?v=1648548819","width":1600},{"alt":"[Australia - AusPower] - Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 ","id":25198980300980,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61HUjuArqLS.jpg?v=1647576098"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61HUjuArqLS.jpg?v=1647576098","width":1100},{"alt":"[Australia - AusPower] - Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 ","id":25198980333748,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71E5SMIHKgS.jpg?v=1647576098"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71E5SMIHKgS.jpg?v=1647576098","width":1600},{"alt":"[Australia - AusPower] - Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 ","id":25198980366516,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61LIt2itbpS.jpg?v=1647576098"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61LIt2itbpS.jpg?v=1647576098","width":1600},{"alt":"[Australia - AusPower] - Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 ","id":25198980399284,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/616xcPo0ZHS.jpg?v=1647576098"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/616xcPo0ZHS.jpg?v=1647576098","width":1100},{"alt":"[Australia - AusPower] - Dorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt 10 ","id":25198980432052,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71eimb4XYxS.jpg?v=1647576098"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71eimb4XYxS.jpg?v=1647576098","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDorhea 10Pcs 2GT Timing Belt 6mm Width Closed Loop Rubber Belt 100mm 110mm 112mm 122mm 158mm 190mm 200mm 280mm 300mm 400mm Width 6mm Timing Bel for 3D Printer Motor Belt\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e2GT pitch: 2mm Belt height: 1.52mm Tooth Height: 0.76mm Material: Neoprene\nrubber with fiberglass core Width: 6mm Shape: Closed loop Package include: 1 x\n3.93inch \/ 100mm timing belts 1 x 4.33inch \/ 110mm timing belts 1 x 4.27inch \/\n112mm timing belts 1 x 4.41inch \/ 122mm timing belts 1 x 6.22inch \/ 158mm\ntiming belts 1 x 7.48inch \/ 190mm timing belts 1 x 8.66inch \/ 200mm timing\nbelts 1 x 11inch \/ 280mm timing belts 1 x 11.8inch \/ 300mm timing belts 1 x\n15.75inch \/ 400mm timing belts\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe timing belt is made of rubber, which is strong and durable, designed for linear motion, high positioning accuracy; The round tooth profile ensures a smooth fit of the belt teeth.\u003c\/li\u003e\n \u003cli\u003e10 different model type, 1 x 3.93inch(100), 1 x 4.33inch(110mm),1 x 4.27inch(112mm), 1 x 4.41inch(122mm),1 x 6.22(158mm),1 x 7.48inch(190mm), 1 x 8.66inch(200mm), 1 x 11inch(280mm), 1 x 11.8inch(300mm), 1 x 15.75(400mm) timing belts for you in daily used, 3d printer parts.\u003c\/li\u003e\n \u003cli\u003e2GT system is an extension of the HTD system with greater load carrying capacity.\u003c\/li\u003e\n \u003cli\u003eTemperature range: -34C to +85C (-30F to +185F)\u003c\/li\u003e\n \u003cli\u003e2GT driver belt suitable for most kind of 3D printers, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders ect.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7167451005108,"title":"Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay","handle":"dorhea-12pcs-jqc-3f-12v-spst-power-relay-module-pcb-type-dc-12-volt-coil-5-pins-mini-spst-power-coil-relay-electric-circuit-protection-dc-power-relay","description":"\u003ch3\u003eDorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor: Blue Material: Plastic, Metal, Electronic component Size: 1.8x1.4x1.9\ncm\/0.71x0.55x0.75 inch Model: JQC-3F Pin Quantity: 5 Pin, PCB plug-in Type\npower relay Coil Voltage: DC 12V Contact: 7A 250VAC ,12A 120VAC\/10A 125VAC\n,10A 28VDC Compact and sealed construction Easy to wire Built in circuit\nprotection, safe to use Can be widely applied in modules, development board,\nDIY PCB universal board, connector, cables and adapters, IC sockets and so on.\nPacking include: 12 x JQC-3F 12V coil 5 Pins mini power coil relay\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eJQC-3F general purpose 5 pins SPST power relay PCB type mini power coil relay\u003c\/li\u003e\n \u003cli\u003eJQC-3F SPST coil voltage : DC 12V; Contact : 7A 250VAC, 12A 120VAC\/10A 125VAC, 10A 28VDC\u003c\/li\u003e\n \u003cli\u003eCoil 5 pins mini SPST power relay pin quantity : 5 Pin; material : plastic, metal, electronic component\u003c\/li\u003e\n \u003cli\u003ePower relay size (Approx.) : 1.8 x 1.4 x 1.9cm \/ 0.7\"\"\"\" x 0.6\"\"\"\" x 0.7\"\"\"\"(L*W*T),widely used in the remote control, communication, automatic control system, electronic equipments, etc.\u003c\/li\u003e\n \u003cli\u003ePower relay PCB type compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-06-24T15:20:42+10:00","created_at":"2022-06-24T15:20:48+10:00","vendor":"DORHEA","type":"Electromechanical Relays","tags":["industrial"],"price":11400,"price_min":11400,"price_max":11400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41604520181940,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B097HFSNSN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay","public_title":null,"options":["Default Title"],"price":11400,"weight":181,"compare_at_price":null,"inventory_management":null,"barcode":"0701715471511","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B097HFSNSN.jpg?v=1656054132","\/\/auspowers.com\/cdn\/shop\/products\/611h_V9QWsS.jpg?v=1656048049","\/\/auspowers.com\/cdn\/shop\/products\/61L-szv5umS.jpg?v=1656048049","\/\/auspowers.com\/cdn\/shop\/products\/61ybEIyeyHS.jpg?v=1656048049","\/\/auspowers.com\/cdn\/shop\/products\/41G6J-gSF_S.jpg?v=1656048049","\/\/auspowers.com\/cdn\/shop\/products\/51svr1v2zrS.jpg?v=1656048049"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B097HFSNSN.jpg?v=1656054132","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay ","id":26268768239796,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B097HFSNSN.jpg?v=1656054132"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B097HFSNSN.jpg?v=1656054132","width":1500},{"alt":"[Australia - AusPower] - Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay ","id":26267814625460,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/611h_V9QWsS.jpg?v=1656048049"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/611h_V9QWsS.jpg?v=1656048049","width":1500},{"alt":"[Australia - AusPower] - Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay ","id":26267814658228,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61L-szv5umS.jpg?v=1656048049"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61L-szv5umS.jpg?v=1656048049","width":1500},{"alt":"[Australia - AusPower] - Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay ","id":26267814690996,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61ybEIyeyHS.jpg?v=1656048049"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61ybEIyeyHS.jpg?v=1656048049","width":1500},{"alt":"[Australia - AusPower] - Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay ","id":26267814723764,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41G6J-gSF_S.jpg?v=1656048049"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41G6J-gSF_S.jpg?v=1656048049","width":1500},{"alt":"[Australia - AusPower] - Dorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay ","id":26267814756532,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51svr1v2zrS.jpg?v=1656048049"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51svr1v2zrS.jpg?v=1656048049","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDorhea 12Pcs JQC-3F 12V SPST Power Relay Module PCB Type DC 12 Volt Coil 5 Pins Mini SPST Power Coil Relay Electric Circuit Protection DC Power Relay\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eColor: Blue Material: Plastic, Metal, Electronic component Size: 1.8x1.4x1.9\ncm\/0.71x0.55x0.75 inch Model: JQC-3F Pin Quantity: 5 Pin, PCB plug-in Type\npower relay Coil Voltage: DC 12V Contact: 7A 250VAC ,12A 120VAC\/10A 125VAC\n,10A 28VDC Compact and sealed construction Easy to wire Built in circuit\nprotection, safe to use Can be widely applied in modules, development board,\nDIY PCB universal board, connector, cables and adapters, IC sockets and so on.\nPacking include: 12 x JQC-3F 12V coil 5 Pins mini power coil relay\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eJQC-3F general purpose 5 pins SPST power relay PCB type mini power coil relay\u003c\/li\u003e\n \u003cli\u003eJQC-3F SPST coil voltage : DC 12V; Contact : 7A 250VAC, 12A 120VAC\/10A 125VAC, 10A 28VDC\u003c\/li\u003e\n \u003cli\u003eCoil 5 pins mini SPST power relay pin quantity : 5 Pin; material : plastic, metal, electronic component\u003c\/li\u003e\n \u003cli\u003ePower relay size (Approx.) : 1.8 x 1.4 x 1.9cm \/ 0.7\"\"\"\" x 0.6\"\"\"\" x 0.7\"\"\"\"(L*W*T),widely used in the remote control, communication, automatic control system, electronic equipments, etc.\u003c\/li\u003e\n \u003cli\u003ePower relay PCB type compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7358540873908,"title":"DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino","handle":"dorhea-20pcs-4-channels-i2c-iic-logic-level-converter-bi-directional-module-3-3v-to-5v-shifter-module-compatible-with-arduino","description":"\u003ch3\u003eDORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBi-directional logic level converter is a small device that safely steps down\n5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level\nconverter also works with 2.8V and 1.8V devices. What really separates this\nLogic level converter from our previous versions is that you can successfully\nset your high and low voltages and step up and down between them safely on the\nsame channel. Each level converter has the capability of converting 4 pins on\nthe high side to 4 pins on the low side with two inputs and two outputs\nprovided for each side. The level converter is very easy to use. The board\nneeds to be powered from the two voltages sources (high voltage and low\nvoltage) that your system is using. High voltage (5V for example) to the ‘HV’\npin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the\n‘GND’ pin. How to use it: The level converter is very easy to use, it needs to\nbe powered from the two voltages sources (high voltage and low voltage) that\nyour system is using. Take the high voltage (5V) and low voltage (3,3V) for\nexample. 5V connects to HV pin; 3.3V connects to LV pin; Ground from the\nsystem connects to GND pin. Package Include: 20 x 4 channels IIC logic level\nconverter\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe bi-directional logic level converter is a small device, can realize bidirectional conversion of UART, IIC, 1-Wire, SPI and other bus signals 3V-5V level, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.\u003c\/li\u003e\n \u003cli\u003eThis level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.\u003c\/li\u003e\n \u003cli\u003eEach logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.The board must be operated by the two voltage sources (high voltage, low voltage) that your system uses. The highest stable communication baud rate is 28800 bps.\u003c\/li\u003e\n \u003cli\u003eThe level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the HV pin, low voltage (3.3V for example) to LV, and ground from the system to the GND pin.\u003c\/li\u003e\n \u003cli\u003eIIC I2C logic level converter bi-directional module Compatible with the breadboard: The level converter is compatible with the breadboard, it can be placed directly on the breadboard\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2023-03-01T20:53:40+11:00","created_at":"2023-03-01T20:53:49+11:00","vendor":"DORHEA","type":"","tags":["industrial_Dec2022"],"price":9000,"price_min":9000,"price_max":9000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42195235307700,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B09J8KXQ5H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino","public_title":null,"options":["Default Title"],"price":9000,"weight":14,"compare_at_price":null,"inventory_management":null,"barcode":"701715489318","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B09J8KXQ5H.jpg?v=1677741170","\/\/auspowers.com\/cdn\/shop\/products\/61Yqy4DXKaL.jpg?v=1677664429","\/\/auspowers.com\/cdn\/shop\/products\/61P-6-7gg_L.jpg?v=1677664429","\/\/auspowers.com\/cdn\/shop\/products\/61fyKAhxrbL.jpg?v=1677664429","\/\/auspowers.com\/cdn\/shop\/products\/61tkCp_mriL.jpg?v=1677664429","\/\/auspowers.com\/cdn\/shop\/products\/61RJEhWmuoL.jpg?v=1677664429"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B09J8KXQ5H.jpg?v=1677741170","options":["Title"],"media":[{"alt":"[Australia - AusPower] - DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino ","id":28315011317940,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B09J8KXQ5H.jpg?v=1677741170"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B09J8KXQ5H.jpg?v=1677741170","width":1600},{"alt":"[Australia - AusPower] - DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino ","id":28310874816692,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Yqy4DXKaL.jpg?v=1677664429"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Yqy4DXKaL.jpg?v=1677664429","width":1600},{"alt":"[Australia - AusPower] - DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino ","id":28310874849460,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61P-6-7gg_L.jpg?v=1677664429"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61P-6-7gg_L.jpg?v=1677664429","width":1600},{"alt":"[Australia - AusPower] - DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino ","id":28310874882228,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61fyKAhxrbL.jpg?v=1677664429"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61fyKAhxrbL.jpg?v=1677664429","width":1600},{"alt":"[Australia - AusPower] - DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino ","id":28310874914996,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61tkCp_mriL.jpg?v=1677664429"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61tkCp_mriL.jpg?v=1677664429","width":1600},{"alt":"[Australia - AusPower] - DORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino ","id":28310874947764,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61RJEhWmuoL.jpg?v=1677664429"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61RJEhWmuoL.jpg?v=1677664429","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDORHEA 20Pcs 4 Channels I2C IIC Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter Module Compatible with Arduino\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBi-directional logic level converter is a small device that safely steps down\n5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level\nconverter also works with 2.8V and 1.8V devices. What really separates this\nLogic level converter from our previous versions is that you can successfully\nset your high and low voltages and step up and down between them safely on the\nsame channel. Each level converter has the capability of converting 4 pins on\nthe high side to 4 pins on the low side with two inputs and two outputs\nprovided for each side. The level converter is very easy to use. The board\nneeds to be powered from the two voltages sources (high voltage and low\nvoltage) that your system is using. High voltage (5V for example) to the ‘HV’\npin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the\n‘GND’ pin. How to use it: The level converter is very easy to use, it needs to\nbe powered from the two voltages sources (high voltage and low voltage) that\nyour system is using. Take the high voltage (5V) and low voltage (3,3V) for\nexample. 5V connects to HV pin; 3.3V connects to LV pin; Ground from the\nsystem connects to GND pin. Package Include: 20 x 4 channels IIC logic level\nconverter\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe bi-directional logic level converter is a small device, can realize bidirectional conversion of UART, IIC, 1-Wire, SPI and other bus signals 3V-5V level, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.\u003c\/li\u003e\n \u003cli\u003eThis level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.\u003c\/li\u003e\n \u003cli\u003eEach logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.The board must be operated by the two voltage sources (high voltage, low voltage) that your system uses. The highest stable communication baud rate is 28800 bps.\u003c\/li\u003e\n \u003cli\u003eThe level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the HV pin, low voltage (3.3V for example) to LV, and ground from the system to the GND pin.\u003c\/li\u003e\n \u003cli\u003eIIC I2C logic level converter bi-directional module Compatible with the breadboard: The level converter is compatible with the breadboard, it can be placed directly on the breadboard\u003c\/li\u003e\n \u003c\/ul\u003e"}

{"id":7234685141172,"title":"Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi","handle":"dorhea-2pcs-iic-i2c-twi-serial-lcd-2004-20x4-blue-backlight-module-with-i2c-interface-adapter-compatible-with-raspberry-pi","description":" \u003ch1\u003eDorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi\u003c\/h1\u003e\n \u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n \u003cp\u003ePackage Include: 2 X Blue 20x4 2004 LCD display module\nwith interface adapter Backlight: Blue with white character color Display: 4\nlines x 20 characters Default Address: 0x27, 0x3F Working Voltage: 5V LCD\ncontroller: HD44780Pin Definition: VCC\/ GND\/SDL and SCA Contrast Adjust:\nPotentiometer Backlight Adjust: Jumper Compatible with Raspberry Pi, banana\nPi, Tinker Board, STM32, ESP32 etc. Read more\u003c\/p\u003e\n \u003cp\u003eFeatures:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eI2C LCD 2004 display 20 characters in one row, 4 rows can display 80 characters.\u003c\/li\u003e\n\u003cli\u003eThis kit contains 3pcs IIC\/I2C\/TWI serial interface adapter, you can start your project at any time.\u003c\/li\u003e\n\u003cli\u003eLess I\/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line), address of the module: 0x27 or 0x3F.\u003c\/li\u003e\n\u003cli\u003eIIC\/I2C interface, only takes two I\/O ports thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you dont want the back light, you can also unplug the jumper cap at the LCD back.\u003c\/li\u003e\n\u003cli\u003eLCD display module works great compatible with Arduino \/ Mega2560 board and other micro-controllers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n ","published_at":"2022-08-24T04:40:40+10:00","created_at":"2022-08-24T04:40:46+10:00","vendor":"DORHEA","type":"Serial Adapters","tags":["electronics3"],"price":13400,"price_min":13400,"price_max":13400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41786344079540,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08DD2BJD6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi","public_title":null,"options":["Default Title"],"price":13400,"weight":150,"compare_at_price":null,"inventory_management":null,"barcode":"13558-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08DD2BJD6.jpg?v=1661324663","\/\/auspowers.com\/cdn\/shop\/products\/61zeNZQ_nkL.jpg?v=1661280046","\/\/auspowers.com\/cdn\/shop\/products\/6110e9edvIL.jpg?v=1661280046","\/\/auspowers.com\/cdn\/shop\/products\/61OSEwfkwiL.jpg?v=1661280046","\/\/auspowers.com\/cdn\/shop\/products\/61L1KbC2ZAL.jpg?v=1661280046","\/\/auspowers.com\/cdn\/shop\/products\/71_vCllqeyL.jpg?v=1661280046"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08DD2BJD6.jpg?v=1661324663","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi ","id":26922016964788,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08DD2BJD6.jpg?v=1661324663"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08DD2BJD6.jpg?v=1661324663","width":1001},{"alt":"[Australia - AusPower] - Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi ","id":26917157142708,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61zeNZQ_nkL.jpg?v=1661280046"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61zeNZQ_nkL.jpg?v=1661280046","width":1001},{"alt":"[Australia - AusPower] - Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi ","id":26917157175476,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/6110e9edvIL.jpg?v=1661280046"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/6110e9edvIL.jpg?v=1661280046","width":1001},{"alt":"[Australia - AusPower] - Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi ","id":26917157208244,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61OSEwfkwiL.jpg?v=1661280046"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61OSEwfkwiL.jpg?v=1661280046","width":1001},{"alt":"[Australia - AusPower] - Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi ","id":26917157241012,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61L1KbC2ZAL.jpg?v=1661280046"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61L1KbC2ZAL.jpg?v=1661280046","width":1001},{"alt":"[Australia - AusPower] - Dorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi ","id":26917157273780,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71_vCllqeyL.jpg?v=1661280046"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71_vCllqeyL.jpg?v=1661280046","width":1601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":" \u003ch1\u003eDorhea 2PCS IIC I2C TWI Serial LCD 2004 20x4 Blue Backlight Module with I2C Interface Adapter Compatible with Raspberry Pi\u003c\/h1\u003e\n \u003ch3\u003e\n\u003cspan class=\"glyphicon glyphicon-list-alt\"\u003e\u003c\/span\u003e Description\u003c\/h3\u003e\n \u003cp\u003ePackage Include: 2 X Blue 20x4 2004 LCD display module\nwith interface adapter Backlight: Blue with white character color Display: 4\nlines x 20 characters Default Address: 0x27, 0x3F Working Voltage: 5V LCD\ncontroller: HD44780Pin Definition: VCC\/ GND\/SDL and SCA Contrast Adjust:\nPotentiometer Backlight Adjust: Jumper Compatible with Raspberry Pi, banana\nPi, Tinker Board, STM32, ESP32 etc. Read more\u003c\/p\u003e\n \u003cp\u003eFeatures:\u003c\/p\u003e\n \u003cul\u003e\n \u003cli\u003eI2C LCD 2004 display 20 characters in one row, 4 rows can display 80 characters.\u003c\/li\u003e\n\u003cli\u003eThis kit contains 3pcs IIC\/I2C\/TWI serial interface adapter, you can start your project at any time.\u003c\/li\u003e\n\u003cli\u003eLess I\/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line), address of the module: 0x27 or 0x3F.\u003c\/li\u003e\n\u003cli\u003eIIC\/I2C interface, only takes two I\/O ports thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you dont want the back light, you can also unplug the jumper cap at the LCD back.\u003c\/li\u003e\n\u003cli\u003eLCD display module works great compatible with Arduino \/ Mega2560 board and other micro-controllers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n "}

{"id":7089365942452,"title":"Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2","handle":"dorhea-2pcs-vk172-g-mouse-usb-gps-dongle-glonass-vk-172-gmouse-receiver-usb-navigation-module-compatible-with-windows-10-8-7-vista-xp-raspberry-pi-vehicle-aviation-tracker-2","description":"\u003ch3\u003eDorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Supported operating systems: Windows 10\/8\/7\/Vista\/XP\/CE Support\nGoogle Earth C \/ A code, 1.023MHz stream Receive Band: L1 [1575.42MHz]\nTracking Channels: 56 Support DGPS [WAAS, EGNOS and MSAS] Positioning\nperformance: 2D plane: 5m [average] 2D plane: 3.5m [average], has DGPS\nauxiliary. Drift: \u0026lt;0.02m \/ s Timing Accuracy: 1us Reference coordinate system:\nWGS-84 Maximum altitude: 18,000 m Maximum speed: 500m \/ s Acceleration: \u0026lt;4g\nElectrical properties: Tracking sensitivity:-162dBm Acquisition\nsensitivity:-160dBm Cold Start Time: 29s [average] Warm start time: 28s\n[average] Hot start time: 1s [average] Recapture Time: 0.1s [average]\nOperating temperature: -30 to +80 Support system: Linux, Windows ME\/98\/CE,\nserver 2003, server 2008, vista, XP, Windows 7, Windows 8,Windows 10, all\nwindows series system. GGA: Time, Location, Location Type GLL: Longitude,\nLatitude, UTC Time GSA: GPS receiver operation mode, positioning satellite,\nDOP value GSV: visible GPS satellite information, elevation, azimuth, signal-\nto-noise ratio (SNR) RMC: time, date, position, speed VTG: Ground Velocity\nInformation Packing includes: 2 X VK172 gmouse USB gps\/glonass usb gps\nreceiver NOTE: The default output is the product GPS protocol data. You can\ntest the software or serial commands to modify switch PS \/ GLONASS protocol\ndata\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android\u003c\/li\u003e\n \u003cli\u003eThe vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver.\u003c\/li\u003e\n \u003cli\u003eVK-172 automatically adapt the baud rate, The baud rate has any data output.\u003c\/li\u003e\n \u003cli\u003eThe default output is GPS protocol data,you can modify the PS\/GLONASS protocol data by testing software or serial commands.\u003c\/li\u003e\n \u003cli\u003eVK-172 built-in high-gain LNA, dual-channel LDO, large area radiation GPS optional baud rate 4800, 9600, 19200, 38400, 5700, 115200, etc.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-10-27T18:05:51+11:00","created_at":"2022-03-22T17:35:40+11:00","vendor":"DORHEA","type":"Antennas","tags":["auspowers_batchtwo"],"price":12100,"price_min":12100,"price_max":12100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41344276332724,"title":"2","option1":"2","option2":null,"option3":null,"sku":"B097T9784Q","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2 - 2","public_title":"2","options":["2"],"price":12100,"weight":67,"compare_at_price":null,"inventory_management":null,"barcode":"14712-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B097T9784Q.jpg?v=1648620564","\/\/auspowers.com\/cdn\/shop\/products\/41l-hBTnb5L.jpg?v=1647930940","\/\/auspowers.com\/cdn\/shop\/products\/511xIK6QzcL.jpg?v=1647930940","\/\/auspowers.com\/cdn\/shop\/products\/41YdY8UXk0L.jpg?v=1647930940","\/\/auspowers.com\/cdn\/shop\/products\/51nsyq-FprL.jpg?v=1647930940"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B097T9784Q.jpg?v=1648620564","options":["Size"],"media":[{"alt":"[Australia - AusPower] - Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2 ","id":25358736326836,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B097T9784Q.jpg?v=1648620564"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B097T9784Q.jpg?v=1648620564","width":1500},{"alt":"[Australia - AusPower] - Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2 ","id":25249193361588,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41l-hBTnb5L.jpg?v=1647930940"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41l-hBTnb5L.jpg?v=1647930940","width":1500},{"alt":"[Australia - AusPower] - Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2 ","id":25249193394356,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/511xIK6QzcL.jpg?v=1647930940"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/511xIK6QzcL.jpg?v=1647930940","width":1500},{"alt":"[Australia - AusPower] - Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2 ","id":25249193427124,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41YdY8UXk0L.jpg?v=1647930940"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41YdY8UXk0L.jpg?v=1647930940","width":1500},{"alt":"[Australia - AusPower] - Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker 2 ","id":25249193459892,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51nsyq-FprL.jpg?v=1647930940"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51nsyq-FprL.jpg?v=1647930940","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10\/8\/7\/vista\/XP\/Raspberry PI Vehicle Aviation Tracker\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Supported operating systems: Windows 10\/8\/7\/Vista\/XP\/CE Support\nGoogle Earth C \/ A code, 1.023MHz stream Receive Band: L1 [1575.42MHz]\nTracking Channels: 56 Support DGPS [WAAS, EGNOS and MSAS] Positioning\nperformance: 2D plane: 5m [average] 2D plane: 3.5m [average], has DGPS\nauxiliary. Drift: \u0026lt;0.02m \/ s Timing Accuracy: 1us Reference coordinate system:\nWGS-84 Maximum altitude: 18,000 m Maximum speed: 500m \/ s Acceleration: \u0026lt;4g\nElectrical properties: Tracking sensitivity:-162dBm Acquisition\nsensitivity:-160dBm Cold Start Time: 29s [average] Warm start time: 28s\n[average] Hot start time: 1s [average] Recapture Time: 0.1s [average]\nOperating temperature: -30 to +80 Support system: Linux, Windows ME\/98\/CE,\nserver 2003, server 2008, vista, XP, Windows 7, Windows 8,Windows 10, all\nwindows series system. GGA: Time, Location, Location Type GLL: Longitude,\nLatitude, UTC Time GSA: GPS receiver operation mode, positioning satellite,\nDOP value GSV: visible GPS satellite information, elevation, azimuth, signal-\nto-noise ratio (SNR) RMC: time, date, position, speed VTG: Ground Velocity\nInformation Packing includes: 2 X VK172 gmouse USB gps\/glonass usb gps\nreceiver NOTE: The default output is the product GPS protocol data. You can\ntest the software or serial commands to modify switch PS \/ GLONASS protocol\ndata\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android\u003c\/li\u003e\n \u003cli\u003eThe vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver.\u003c\/li\u003e\n \u003cli\u003eVK-172 automatically adapt the baud rate, The baud rate has any data output.\u003c\/li\u003e\n \u003cli\u003eThe default output is GPS protocol data,you can modify the PS\/GLONASS protocol data by testing software or serial commands.\u003c\/li\u003e\n \u003cli\u003eVK-172 built-in high-gain LNA, dual-channel LDO, large area radiation GPS optional baud rate 4800, 9600, 19200, 38400, 5700, 115200, etc.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7390285856948,"title":"DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W","handle":"dorhea-30cm-11-8inch-raspberry-pi-zero-camera-cable-ribbon-ffc-11-8-inch-extension-cable-specific-camera-cable-15-pin-22-pin-for-raspberry-pi-zero-or-zero-w","description":"\u003ch3\u003eDORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHigh quality pi zero camera FFC cable Leight: 30 CM (11.8 inch ) This is a\ncamera cable compatible with Raspberry Pi zero and zero w Package Including: 1\nx Raspberry Pi Zero Camera Cable Note: The camera module and raspberry pi\nshown in the picture are not included\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis camera cable is specifically designed for Raspberry Pi zero or zero w camera module.\u003c\/li\u003e\n \u003cli\u003eThis pi zero camera ribbon is perfectly compatible for Raspberry Pi camera board ,work fine with your need and would be flexible with camera placement.\u003c\/li\u003e\n \u003cli\u003eOne end of the zero w cable is 15 Pin 1.0mm Pitch interface and the other end with 22 Pin 0.5mm interface.\u003c\/li\u003e\n \u003cli\u003eJust plug it into your pi zero's camera port and then the other end into one of the Pi Cameras for photo \u0026amp; video joy.\u003c\/li\u003e\n \u003cli\u003eThe FCC cable is extremely soft and compact, easy to install, perfect show video, length 30cm easy to adjust the distance.\u003c\/li\u003e\n \u003c\/ul\u003e","published_at":"2023-06-05T16:58:30+10:00","created_at":"2023-06-05T16:58:37+10:00","vendor":"DORHEA","type":"Cables \u0026 Cords","tags":["June2023_cocoonwix"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42293395587252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"w-B07H3L3LM2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W","public_title":null,"options":["Default Title"],"price":8000,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"701715546714","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/files\/w-B07H3L3LM2.jpg?v=1685949698","\/\/auspowers.com\/cdn\/shop\/products\/513O0cfJvaL.jpg?v=1685948317","\/\/auspowers.com\/cdn\/shop\/products\/51Tag0QMS_L.jpg?v=1685948317","\/\/auspowers.com\/cdn\/shop\/products\/51TmPB3rQVL.jpg?v=1685948318","\/\/auspowers.com\/cdn\/shop\/products\/51EqoySMo5L.jpg?v=1685948318","\/\/auspowers.com\/cdn\/shop\/products\/51mEBPKZ9FL.jpg?v=1685948318"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/files\/w-B07H3L3LM2.jpg?v=1685949698","options":["Title"],"media":[{"alt":"[Australia - AusPower] - DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W ","id":28742833832116,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/files\/w-B07H3L3LM2.jpg?v=1685949698"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/files\/w-B07H3L3LM2.jpg?v=1685949698","width":1000},{"alt":"[Australia - AusPower] - DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W ","id":28742767870132,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/513O0cfJvaL.jpg?v=1685948317"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/513O0cfJvaL.jpg?v=1685948317","width":1000},{"alt":"[Australia - AusPower] - DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W ","id":28742767902900,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51Tag0QMS_L.jpg?v=1685948317"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51Tag0QMS_L.jpg?v=1685948317","width":1000},{"alt":"[Australia - AusPower] - DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W ","id":28742767935668,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51TmPB3rQVL.jpg?v=1685948318"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51TmPB3rQVL.jpg?v=1685948318","width":1000},{"alt":"[Australia - AusPower] - DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W ","id":28742767968436,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51EqoySMo5L.jpg?v=1685948318"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51EqoySMo5L.jpg?v=1685948318","width":1000},{"alt":"[Australia - AusPower] - DORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W ","id":28742768001204,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51mEBPKZ9FL.jpg?v=1685948318"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51mEBPKZ9FL.jpg?v=1685948318","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eDORHEA 30cm\/11.8inch Raspberry Pi Zero Camera Cable Ribbon FFC 11.8 inch Extension Cable Specific Camera Cable 15 Pin 22 Pin for Raspberry Pi Zero or Zero W\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eHigh quality pi zero camera FFC cable Leight: 30 CM (11.8 inch ) This is a\ncamera cable compatible with Raspberry Pi zero and zero w Package Including: 1\nx Raspberry Pi Zero Camera Cable Note: The camera module and raspberry pi\nshown in the picture are not included\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThis camera cable is specifically designed for Raspberry Pi zero or zero w camera module.\u003c\/li\u003e\n \u003cli\u003eThis pi zero camera ribbon is perfectly compatible for Raspberry Pi camera board ,work fine with your need and would be flexible with camera placement.\u003c\/li\u003e\n \u003cli\u003eOne end of the zero w cable is 15 Pin 1.0mm Pitch interface and the other end with 22 Pin 0.5mm interface.\u003c\/li\u003e\n \u003cli\u003eJust plug it into your pi zero's camera port and then the other end into one of the Pi Cameras for photo \u0026amp; video joy.\u003c\/li\u003e\n \u003cli\u003eThe FCC cable is extremely soft and compact, easy to install, perfect show video, length 30cm easy to adjust the distance.\u003c\/li\u003e\n \u003c\/ul\u003e"}