ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool
ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool
Warm notice: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that. Attenton: The feeler gauge is detachable in design. The screw at the end may fall off during transportation. You only need to tighten the screw after reinstallation. The Best Cost-effective, Durable Feeler Gauge Set Features: ✔Folding feeler gauges, easy to clean and convenient to take and store ✔Designed with a thumb notch for easy selection and expansion ✔The numbers of size are etched into feeler gauge for easy identification ✔Constructed from 65 manganese steel with a lube oil coating to prevent pitting and corrosion Note: 1.Please clean up the machine before measuring. It shouldn’t be measured when the machine has high temperature. Your action should be light and you shouldn’t insert it forcefully when measuring. 2.If the feeler gauge you received contains a lot of oil, don’t worry, it is an anti-rust oil, which has anti-rust and lubricating effects. 65 Manganese Steel Feeler with 32-Blade Measurement: ·Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88 ·Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035 Offset Feeler Gauge with 16-Blade Measurement: ·Metric sizes (mm): 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508 ·Inch sizes: 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018,0.019, 0.020
Product Features
- Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance.
- Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify.
- Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details.
- Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone.
- NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperation.
Related Products
ChgImposs Metric & Imperial & US...
ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metrisch 60 Degree Thread Pitch Gauge for Industrial Measurement
$91.00 AUD
ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metrisch 60 Degree Thread Pitch Gauge for Industrial Measurement Specifications: Features: - It is useful to check the tool angle when cutting threads on a metal lathe. - Check the angle on the thread cutting tool on the V-groove of the gauge. - It is 55 Degree &a...
Accusize Industrial Tools 0.011'...
Accusize Industrial Tools 0.011'' to 0.060'', 50 Pc Steel Plug Pin Gage Set, Minus, Class Zz, M0(-) 0.011"-0.060"
$196.00 AUD
Accusize Industrial Tools 0.011'' to 0.060'', 50 Pc Steel Plug Pin Gage Set, Minus, Class Zz, M0(-) Accusize Industrial Tools Minus Pin Gage Sets Accusize Minus Pin Gage Sets Class ZZEach gage is electro-etched with its actual size.Tolerance for minus set tolerance: +0.0000" / -0.0002"All gages are 2" long, center less lapped.Hardness: Each Accu...
Accusize Industrial Tools Premiu...
Accusize Industrial Tools Premium 5/16'' - 6", 6ps/Set Telescoping Gage Set, Stain Chrome Finished, 3602-5018
$245.00 AUD
Accusize Industrial Tools Premium 5/16'' - 6", 6ps/Set Telescoping Gage Set, Stain Chrome Finished, 3602-5018 Product Features Stain chrome finish Contact points are hardened tool steel and precision ground on the end measuring radius Rigid handle with self-centering system Smooth and constant spring tension Supplied with...
2 Pcs Stainless Steel Thickness ...
2 Pcs Stainless Steel Thickness Gauges, Wire Gauge Measurement Tool-Round Wire Cable Sheet Thickness Gage and Wire Thickness Gauge
$91.00 AUD
2 Pcs Stainless Steel Thickness Gauges, Wire Gauge Measurement Tool-Round Wire Cable Sheet Thickness Gage and Wire Thickness Gauge Features:1.Dual mark swg sae.swg: 0-36 standard,inch scale: 0.3125" - 0.007",the wire gauge is accurate for wire and metal.2.Our gauge is made of stainless steel,not iron or normal steel,most product in market are ma...
Spurtar 32 Blades Steel Feeler G...
Spurtar 32 Blades Steel Feeler Gauge Measurement Tool for Measuring Gap Width or Thickness
$91.00 AUD
Spurtar 32 Blades Steel Feeler Gauge Measurement Tool for Measuring Gap Width or Thickness Spurtar Tapered Feeler Gauge Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool (0.04-0.88 mm, 32 Blades) Spurtar Feeler Gauge Set is a 32-blade tapered feeler gauge set with both metric and inch readings. The tapered-end works...
Paint Thickness Gauge TC100 Car ...
Paint Thickness Gauge TC100 Car Coating Thickness Meter for Used Car Buyers, Paint Mil Thickness Meter Gauge Check The Car’s Original Coating Auto Car Paint Meter Black
$257.00 AUD
Paint Thickness Gauge TC100 Car Coating Thickness Meter for Used Car Buyers, Paint Mil Thickness Meter Gauge Check The Car’s Original Coating Auto Car Paint Meter Read more Read more PACKAGE: 1 TC100 car Coating Paint thickness gauge 1 Aluminum Substrate 1 Iron Substrate 1 Package Box 5 Calibration Coating Films 1 double language Manual 1 ...
GemRed Digital Depth Guage Heigh...
GemRed Digital Depth Guage Height Gauge for Router Table
$126.00 AUD
GemRed Digital Depth Guage Height Gauge for Router Table Product Features Measuring Range:0~80mm (0~3 1/8" ); Resolution:0.05mm(0.002") ; Accuracy: 0.1mm (0.004") Two measure mode: relative and absolute measurement Three measure units: in/mm/fraction(only shows fraction when the number HAS equivalent fraction) ...
Wire Gauge Measurement Tool, Met...
Wire Gauge Measurement Tool, Metal Gauge Thickness Tool, Stainless Steel Thickness Gauges, 2 Pack Sheet Metal Tools
$91.00 AUD
Wire Gauge Measurement Tool, Metal Gauge Thickness Tool, Stainless Steel Thickness Gauges, 2 Pack Sheet Metal Tools Specification: - color:as the picture. - material:stainless steel, rust proof, anti-corrosion. - package:2 pcs. Measuring range(imperial): 24GA (.0239) 22GA (.0299) 20GA (.0359) 18GA (.0478) 16GA (.0598) 14GA (.0747) 1/8" (.0125) 1...
HHIP 4103-0200 Replacement Pin G...
HHIP 4103-0200 Replacement Pin Gage, P-1 (-0.0002) Tolerance, 0.2" 0.200"
$71.00 AUD
HHIP 4103-0200 Replacement Pin Gage, P-1 (-0.0002) Tolerance, 0.2" Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002". Product Features Re...
2 Pack Thread Pitch Gauge, 51...
2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool
$134.00 AUD
2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool Applied To Measure Thread And External Thread Tooth Pitch Features: - It is useful to check the tool angle when cutting threads on a metal lathe. - Check the angle...
Accusize Industrial Tools 0.011'...
Accusize Industrial Tools 0.011''-0.060'', 50 Pc Steel Plug Pin Gage Set, Plus, Class Zz, P0(+) 0.011"-0.060"
$200.00 AUD
Accusize Industrial Tools 0.011''-0.060'', 50 Pc Steel Plug Pin Gage Set, Plus, Class Zz, P0(+) Accusize Industrial Tools P0(+) to P7(+) Plus Pin Gage Sets Accusize P0(+) to P7(+) Plus Pin Gage Sets Class ZZEach gage is electro- etched with its actual size.Tolerance for plus set tolerance: +0.0002" / -0.0000“All gages are 2" long, centerless lap...
2 Pack Feeler Gauge with 32/26...
2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair
$127.00 AUD
2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair PACKAGE CONTENT Feeler Gauge with 32 Blades x 1 Feeler Gauge with 26 Blades x 1 Feeler Gauge with 16 Blades x 1 FEATURES 3 types in one set High precision and ...
iGaging 0-4" Electronic Digital ...
iGaging 0-4" Electronic Digital Depth Gauge SnapDepth 0.0005" Inch/Metric/Fractions Tire Tread Gage
$127.00 AUD
iGaging 0-4" Electronic Digital Depth Gauge SnapDepth 0.0005" Inch/Metric/Fractions Tire Tread Gage Professional Precision 2 in 1 Digial Indicator & Depth Gage 2 measuring tools for the price of 1! This tool funtions as an indicator or as depth gage! Rod extends to 1", 2", 3" and 4" with the included extension bars to measure deeper. Feature...