Xiaoyztan 10 Pcs KSD9700 75 Celsius Bimetal Thermostat Normally Close NC Type Temprerature Control Switch Units for Houshold Applicances or Other Thermal Projects
Xiaoyztan 10 Pcs KSD9700 75 Celsius Bimetal Thermostat Normally Close NC Type Temprerature Control Switch Units for Houshold Applicances or Other Thermal Projects
Specifications: Contact: Normally Open Rated Voltage: 250V Current: 5A Insulation resistance: ≥100MΩ Max Rated Disconnection Temperature: 75±5℃ Automatic reset temperature: 53±14℃ Cable Length: 65mm / 2.6" Head Dimension: 20x8x3mm / 0.79"x0.31"x0.12"(LWT) Notice: 1. Please keep the cap firm with the installation surface of the controlled appliance when install. Please wipe conduction silicon grease to the sensing surface in order to insure effect of the temperature sensing. 2. Never collapse or deform the plastic or metal shell during installation in order to avoid any influence to its performance. 3. For products used in circuit at no more than 5A current, please choose the lead with cross-section surface of copper core falls within0.4-0.75mm for connection. 4.This product is not suitable for heat in the air, only applies to contact heat! (available binding wire, iron wire, fixed or 704 silicone rubber for fixed) 5. Metal shell case charged, work is not suitable for water. 6. When installation, the temperature control switch shall be clingy was charged with the installation of the equipment surface. 7. Contact resistance: When the contact is closed, the contact resistance between the two contacts of the thermal protector should not be greater than 30mΩ. 8. Electric strength: Apply a basic sine wave test voltage (effective value) with a frequency of 50Hz between the following parts of the thermal protector, and there should be no flashover and breakdown after 1S.
Product Features
- PACKAGE - 10 x 75C Normally Closed Bimetal Thermostat.
- INTRODUCTION - KDS9700 is a thermal switch with a rectangle bimetal normally closed temperature sensor, widely used in home appliance and rsquo; use motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc.
- PRINCIPLES - Normally, it is in free state and the contacts are closed when the electrical appliance is working in normal condition. When the temperature rises to the preset operating temperature, the bimetal sheet jumps, the transmission contacts act quickly, and the circuit is disconnected.
- FEATURES - Disconnection Temperature: 75C / 167F; Rated Voltage: 250V; Current: 5A; Max Rated.DIMENSIONS - Cable Length: 65mm/ 2.6inches; Head Dimension: 20 x 8 x 3mm / 0.79 x 0.31 x 0.12 inch (L*W*T).
- AFTERSALES - Please feel free to let us know if you meet any product quality issue, we will try our best to help you.