Name: Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version
Brand: REPTOR
SKU: B075SLTY8B
Price: 108.00 AUD
Availability: InStock

{"id":7085994672308,"title":"Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version","handle":"premium-3d-print-removal-tool-kit-durable-3d-printer-tools-with-sturdy-comfort-grips-sharp-and-hardened-blades-for-easy-separation-of-prints-knife-and-spatula-set-of-2-enhanced-version","description":"\u003ch3\u003ePremium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAre you looking for a 3D print removal toolset with Solid, riveted handles\nthat won't come loose and start spinning, twisting or turning after use?\nHardened stainless steel blades that are optimally flexible without being too\nflimsy and\/or getting scratched and gouged by the print bed surface due to\ntheir softness? A knife tool with a sharpened front edge (flat bottom) for\ngetting under even the most-adhered prints with ease? Ability to reach into\nthe back under larger parts, sweep across and lever them off, as well as\nhandle smaller, more delicate objects? Durable comfort handles with grips\ndesigned for a firm hold that feel good in the hand and look stylish too?\nSafe, rounded blades easier on your fingers, prints and printer surface?\nREPTOR 3D Print Removal Tools have been designed with all these aspects in\nmind.These tools are not your average repurposed painters putty knives with\ncramp rings that come loose or fall apart before long when used to remove 3D\nprints! This REPTOR toolset is designed to get even the most stubborn prints\noff the bed without distorting them or damaging the print bed surface. Both\nhandles have solid rivets in them that will hold the blades in place and will\nnot permit the blades to turn or yield. The knife with its 4.92\" blade and\nbeveled front edge can be used to sweep across and reach into the back under\nlarger parts and provide leverage to pop even a stubborn piece up while the\nspatula is thin and flexible enough to get under even the most delicate of\nobjects without distorting them. They are the perfect duo - practical and\ndurable, yet comfortable and stylish! Get yours now!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDurable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!\u003c\/li\u003e\n \u003cli\u003eLong knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying\u003c\/li\u003e\n \u003cli\u003eStiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them\u003c\/li\u003e\n \u003cli\u003eStylish and useful; The smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts\u003c\/li\u003e\n \u003cli\u003eEssential addition to your 3D Printer accessories; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T16:39:03+11:00","created_at":"2022-03-18T16:39:03+11:00","vendor":"REPTOR","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":10800,"price_min":10800,"price_max":10800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333771534516,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B075SLTY8B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version","public_title":null,"options":["Default Title"],"price":10800,"weight":110,"compare_at_price":null,"inventory_management":null,"barcode":"1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B075SLTY8B.jpg?v=1648552076","\/\/auspowers.com\/cdn\/shop\/products\/71ZNocT3e3L.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/71n058n0PFL.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/61Z5-zFAvfL.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/51YzV3CR8XL.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/61gspV7pyqL.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/61E9pgiSQGL.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/61H0GzYChjL.jpg?v=1647581943","\/\/auspowers.com\/cdn\/shop\/products\/61KtpGvOU0L.jpg?v=1647581943"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B075SLTY8B.jpg?v=1648552076","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25345587019956,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B075SLTY8B.jpg?v=1648552076"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B075SLTY8B.jpg?v=1648552076","width":2560},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022388916,"position":2,"preview_image":{"aspect_ratio":1.002,"height":2267,"width":2271,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71ZNocT3e3L.jpg?v=1647581943"},"aspect_ratio":1.002,"height":2267,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71ZNocT3e3L.jpg?v=1647581943","width":2271},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022421684,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1598,"width":1598,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71n058n0PFL.jpg?v=1647581943"},"aspect_ratio":1.0,"height":1598,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71n058n0PFL.jpg?v=1647581943","width":1598},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022454452,"position":4,"preview_image":{"aspect_ratio":0.858,"height":1053,"width":903,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Z5-zFAvfL.jpg?v=1647581943"},"aspect_ratio":0.858,"height":1053,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Z5-zFAvfL.jpg?v=1647581943","width":903},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022487220,"position":5,"preview_image":{"aspect_ratio":0.769,"height":1128,"width":867,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51YzV3CR8XL.jpg?v=1647581943"},"aspect_ratio":0.769,"height":1128,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51YzV3CR8XL.jpg?v=1647581943","width":867},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022519988,"position":6,"preview_image":{"aspect_ratio":0.816,"height":1187,"width":969,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61gspV7pyqL.jpg?v=1647581943"},"aspect_ratio":0.816,"height":1187,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61gspV7pyqL.jpg?v=1647581943","width":969},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022552756,"position":7,"preview_image":{"aspect_ratio":0.837,"height":1419,"width":1187,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61E9pgiSQGL.jpg?v=1647581943"},"aspect_ratio":0.837,"height":1419,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61E9pgiSQGL.jpg?v=1647581943","width":1187},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022585524,"position":8,"preview_image":{"aspect_ratio":0.999,"height":1658,"width":1656,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61H0GzYChjL.jpg?v=1647581943"},"aspect_ratio":0.999,"height":1658,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61H0GzYChjL.jpg?v=1647581943","width":1656},{"alt":"[Australia - AusPower] - Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version ","id":25200022618292,"position":9,"preview_image":{"aspect_ratio":0.789,"height":1805,"width":1425,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61KtpGvOU0L.jpg?v=1647581943"},"aspect_ratio":0.789,"height":1805,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61KtpGvOU0L.jpg?v=1647581943","width":1425}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003ePremium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAre you looking for a 3D print removal toolset with Solid, riveted handles\nthat won't come loose and start spinning, twisting or turning after use?\nHardened stainless steel blades that are optimally flexible without being too\nflimsy and\/or getting scratched and gouged by the print bed surface due to\ntheir softness? A knife tool with a sharpened front edge (flat bottom) for\ngetting under even the most-adhered prints with ease? Ability to reach into\nthe back under larger parts, sweep across and lever them off, as well as\nhandle smaller, more delicate objects? Durable comfort handles with grips\ndesigned for a firm hold that feel good in the hand and look stylish too?\nSafe, rounded blades easier on your fingers, prints and printer surface?\nREPTOR 3D Print Removal Tools have been designed with all these aspects in\nmind.These tools are not your average repurposed painters putty knives with\ncramp rings that come loose or fall apart before long when used to remove 3D\nprints! This REPTOR toolset is designed to get even the most stubborn prints\noff the bed without distorting them or damaging the print bed surface. Both\nhandles have solid rivets in them that will hold the blades in place and will\nnot permit the blades to turn or yield. The knife with its 4.92\" blade and\nbeveled front edge can be used to sweep across and reach into the back under\nlarger parts and provide leverage to pop even a stubborn piece up while the\nspatula is thin and flexible enough to get under even the most delicate of\nobjects without distorting them. They are the perfect duo - practical and\ndurable, yet comfortable and stylish! Get yours now!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eDurable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!\u003c\/li\u003e\n \u003cli\u003eLong knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying\u003c\/li\u003e\n \u003cli\u003eStiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them\u003c\/li\u003e\n \u003cli\u003eStylish and useful; The smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts\u003c\/li\u003e\n \u003cli\u003eEssential addition to your 3D Printer accessories; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

In Stock. Leaves warehouse within 2 - 3 business days

$108.00 AUD

Maximum quantity available reached.

Enter 5POWER at Checkout for 5% OFF & Free Shipping in Australia

More detailed product descriptions

Free Shipping Australia Wide

100% Safe & Secure Checkout

100 Days Return Policy *

1 Year Warranty *

Description

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

Are you looking for a 3D print removal toolset with Solid, riveted handles that won't come loose and start spinning, twisting or turning after use? Hardened stainless steel blades that are optimally flexible without being too flimsy and/or getting scratched and gouged by the print bed surface due to their softness? A knife tool with a sharpened front edge (flat bottom) for getting under even the most-adhered prints with ease? Ability to reach into the back under larger parts, sweep across and lever them off, as well as handle smaller, more delicate objects? Durable comfort handles with grips designed for a firm hold that feel good in the hand and look stylish too? Safe, rounded blades easier on your fingers, prints and printer surface? REPTOR 3D Print Removal Tools have been designed with all these aspects in mind.These tools are not your average repurposed painters putty knives with cramp rings that come loose or fall apart before long when used to remove 3D prints! This REPTOR toolset is designed to get even the most stubborn prints off the bed without distorting them or damaging the print bed surface. Both handles have solid rivets in them that will hold the blades in place and will not permit the blades to turn or yield. The knife with its 4.92" blade and beveled front edge can be used to sweep across and reach into the back under larger parts and provide leverage to pop even a stubborn piece up while the spatula is thin and flexible enough to get under even the most delicate of objects without distorting them. They are the perfect duo - practical and durable, yet comfortable and stylish! Get yours now!

Product Features

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!
Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying
Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them
Stylish and useful; The smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts
Essential addition to your 3D Printer accessories; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed

Related Products

STEPPERONLINE High Torque Nema 1...

$159.00 AUD

{"id":7085142573236,"title":"STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor","handle":"stepperonline-high-torque-nema-17-bipolar-stepper-motor-92oz-in-65ncm-2-1a-extruder-motor","description":"\u003ch3\u003eSTEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step\nangle (200 steps\/revolution). Each phase draws 2.1A, allowing for a holding\ntorque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part\nNumber: 17HS24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8 deg. \nHolding Torque: 65Ncm(92oz.in) Rated Current\/phase: 2.1A Phase Resistance:\n1.6ohms Inductance: 3mH+\/-20%(1KHz) Physical Specification: Frame Size: 42\nx 42mm Body Length: 60mm Shaft Diameter: 5mm Shaft Length: 24mm D-cut\nLength: 15mm Number of Leads: 4 Lead Length: 500mm Weight: 500g\nConnection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the\nmotor connect to a constant current or chopper drive controller before you\ntest motor. Connecting the motor directly to a power supply will destroy the\nmotor.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e65Ncm(92oz.in) holding torque\u003c\/li\u003e\n \u003cli\u003eNEMA 17 bipolar 1.65\"x1.65\"x2.36\" 4-wire\u003c\/li\u003e\n \u003cli\u003e1.8 deg. step angle(200 steps\/rev)\u003c\/li\u003e\n \u003cli\u003eRated current 2.1A \u0026amp; resistance 1.6ohms\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-17T16:13:09+11:00","created_at":"2022-03-17T16:13:09+11:00","vendor":"STEPPERONLINE","type":"3D Printer Motors","tags":["auspowers_batchone"],"price":15900,"price_min":15900,"price_max":15900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41331628048564,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00PNEQUZ2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor","public_title":null,"options":["Default Title"],"price":15900,"weight":535,"compare_at_price":null,"inventory_management":null,"barcode":"701056398768","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049","\/\/auspowers.com\/cdn\/shop\/products\/61UIXTJMywL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/51CjS_psuHL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/61UEpAJE4dL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/61bURlEKdbL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/41T7oFxBl9L.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/31cKfwDcIqL_191a1f26-c1d5-4df8-b3b4-3f5916baea62.jpg?v=1647493989"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049","options":["Title"],"media":[{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25341086990516,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049","width":1100},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280079540,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UIXTJMywL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UIXTJMywL.jpg?v=1647493989","width":1100},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280112308,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51CjS_psuHL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51CjS_psuHL.jpg?v=1647493989","width":1000},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280145076,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UEpAJE4dL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UEpAJE4dL.jpg?v=1647493989","width":1100},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280177844,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61bURlEKdbL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61bURlEKdbL.jpg?v=1647493989","width":1000},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280210612,"position":6,"preview_image":{"aspect_ratio":1.926,"height":257,"width":495,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41T7oFxBl9L.jpg?v=1647493989"},"aspect_ratio":1.926,"height":257,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41T7oFxBl9L.jpg?v=1647493989","width":495},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280243380,"position":7,"preview_image":{"aspect_ratio":2.632,"height":190,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/31cKfwDcIqL_191a1f26-c1d5-4df8-b3b4-3f5916baea62.jpg?v=1647493989"},"aspect_ratio":2.632,"height":190,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/31cKfwDcIqL_191a1f26-c1d5-4df8-b3b4-3f5916baea62.jpg?v=1647493989","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSTEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step\nangle (200 steps\/revolution). Each phase draws 2.1A, allowing for a holding\ntorque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part\nNumber: 17HS24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8 deg. \nHolding Torque: 65Ncm(92oz.in) Rated Current\/phase: 2.1A Phase Resistance:\n1.6ohms Inductance: 3mH+\/-20%(1KHz) Physical Specification: Frame Size: 42\nx 42mm Body Length: 60mm Shaft Diameter: 5mm Shaft Length: 24mm D-cut\nLength: 15mm Number of Leads: 4 Lead Length: 500mm Weight: 500g\nConnection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the\nmotor connect to a constant current or chopper drive controller before you\ntest motor. Connecting the motor directly to a power supply will destroy the\nmotor.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e65Ncm(92oz.in) holding torque\u003c\/li\u003e\n \u003cli\u003eNEMA 17 bipolar 1.65\"x1.65\"x2.36\" 4-wire\u003c\/li\u003e\n \u003cli\u003e1.8 deg. step angle(200 steps\/rev)\u003c\/li\u003e\n \u003cli\u003eRated current 2.1A \u0026amp; resistance 1.6ohms\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor

$159.00 AUD

STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part Number: 17HS24-2104S Motor Type:...

BZ 3D GT2 Timing Belt 6mm...

$124.00 AUD

{"id":7086807384244,"title":"BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M","handle":"bz-3d-gt2-timing-belt-6mm-width-non-slip-version-for-prusa-i3-ender-3-cr-10-anet-a8-i3-mega-3d-printer-ect-10m-10m","description":"\u003ch3\u003eBZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAfter-sales guarantee: each defective item can be replacement for free or\nrefund. If any question, please feel free to contact or QA us, BZ 3D is\ncommitted to providing you with the best service!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUpgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Pulley contact with the belt, that minimizes the chance of the belt slipping.\u003c\/li\u003e\n \u003cli\u003eAccurate roundness tooth shape, ensuring accurate positioning and quiet and efficient transmission.\u003c\/li\u003e\n \u003cli\u003eNo slip, low noise, high transmission efficiency.\u003c\/li\u003e\n \u003cli\u003eHigh-strength structural design, anti-extension, make the transmission more stable.\u003c\/li\u003e\n \u003cli\u003eLength: 10m,Width: 6mm, Material: Rubber,Style:GT2 timing belt with non-slip cloth version.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:07:44+11:00","created_at":"2022-03-19T05:07:44+11:00","vendor":"BZ 3D","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335965384884,"title":"10M","option1":"10M","option2":null,"option3":null,"sku":"B07WRBRDBZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M - 10M","public_title":"10M","options":["10M"],"price":12400,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":"141721689287","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620","\/\/auspowers.com\/cdn\/shop\/products\/61v42ifhgiL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/71ELm3yK9JL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/61AXxZ4m01L.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/610FnS-7AUL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/61Kf5NrFrLL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/61w8wuvgkwL.jpg?v=1647626864"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620","options":["Style"],"media":[{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25351862124724,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313072308,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61v42ifhgiL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61v42ifhgiL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313105076,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71ELm3yK9JL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71ELm3yK9JL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313137844,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61AXxZ4m01L.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61AXxZ4m01L.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313170612,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/610FnS-7AUL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/610FnS-7AUL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313203380,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Kf5NrFrLL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Kf5NrFrLL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313236148,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61w8wuvgkwL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61w8wuvgkwL.jpg?v=1647626864","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAfter-sales guarantee: each defective item can be replacement for free or\nrefund. If any question, please feel free to contact or QA us, BZ 3D is\ncommitted to providing you with the best service!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUpgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Pulley contact with the belt, that minimizes the chance of the belt slipping.\u003c\/li\u003e\n \u003cli\u003eAccurate roundness tooth shape, ensuring accurate positioning and quiet and efficient transmission.\u003c\/li\u003e\n \u003cli\u003eNo slip, low noise, high transmission efficiency.\u003c\/li\u003e\n \u003cli\u003eHigh-strength structural design, anti-extension, make the transmission more stable.\u003c\/li\u003e\n \u003cli\u003eLength: 10m,Width: 6mm, Material: Rubber,Style:GT2 timing belt with non-slip cloth version.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M

$124.00 AUD

BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service! Product Features Upg...

Usongshine 12 Pieces 3D Printer ...

$74.00 AUD

{"id":7086069973172,"title":"Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4","handle":"usongshine-12-pieces-3d-printer-nozzles-mk8-nozzle-0-4mm-for-3d-printer-makerbot-creality-cr-10-mk8-12-pcs-0-4","description":"\u003ch3\u003eUsongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUsongshine 3D printer nozzles MK8 extruder nozzles\nPerfectly circular and with thread size. The extrusion holes are centered and\nconcentric, the bore is smooth, and the threads are clean, connect with M6\nfrom the thread, easy to install, fits the parts exactly. Read more Precise\nsize The 3D printer nozzle through long-term tests to largely solve the\nproblem of clogging and lack of materials, low thermal conductivity, corrosion\nresistance, high abrasion resistance. Consistency standard opening size The\ncleaning needle slides down the nozzle, the nozzle hole has a standard size\nand is easily screwed into the heating block. Applicability and compatibility\nWith the robust and high quality brass material, compatible with all 1.75 mm\nPLA ABS 3D printers. The 3D printer nozzle for more than hours of printing at\n100% flow. Tailor-made for your 3D printer Provide nozzles of various sizes\naround the nozzles for different speed \/ precision combinations to find your\nideal fit. Read more Premium quality Applicability and compatibility Precise\ndesign Read more Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePremium Quality: MK8 nozzles are made of high quality brass material. They are robust and offer a long service life. Easy to install and change. Input diameter 1.75 mm; Screw thread: M6; Hexagon diameter: 6 mm.\u003c\/li\u003e\n \u003cli\u003ePrecise design: 3D printer nozzles can effectively prevent the print head from leaking and produce consistent prints with smooth and glossy varnish. Reduce the resistance at the corners and avoid blocking the filament with a rounded chamfer nozzle.\u003c\/li\u003e\n \u003cli\u003eApplicability and compatibility: MK8 extruder nozzles fit for 3D printer Makerbot Creality CR-10, MK8-Makerbot Reprap Prusa I3, almost compatible with all 1.75 mm PLA ABS 3D printers. Fits exactly like the original.\u003c\/li\u003e\n \u003cli\u003eScope of delivery: The printer nozzles come with 12 0.4mm MK8 nozzles with 5 nozzle cleaning needles.\u003c\/li\u003e\n \u003cli\u003eHigh quality: Usongshine is a company specializing in 3D printers and 3D accessories. All products are subject to strict quality controls before they leave the factory.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:15:19+11:00","created_at":"2022-03-18T18:15:19+11:00","vendor":"Usongshine","type":"3D Printer Extruders","tags":["auspowers_batchone"],"price":7400,"price_min":7400,"price_max":7400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334016606388,"title":"MK8 12 pcs 0.4","option1":"MK8 12 pcs 0.4","option2":null,"option3":null,"sku":"B07W486RGM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 - MK8 12 pcs 0.4","public_title":"MK8 12 pcs 0.4","options":["MK8 12 pcs 0.4"],"price":7400,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":"200000087","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547","\/\/auspowers.com\/cdn\/shop\/products\/61doJBu_f_L.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/61DcYikTvRL.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/71hF85he7tL.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/71HFaxnzGWL.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/71AUAT11m9L.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/61JGooyhXKL.jpg?v=1647587719"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547","options":["Color"],"media":[{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25346222358708,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031610548,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61doJBu_f_L.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61doJBu_f_L.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031643316,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61DcYikTvRL.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61DcYikTvRL.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031676084,"position":4,"preview_image":{"aspect_ratio":0.999,"height":1500,"width":1499,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71hF85he7tL.jpg?v=1647587719"},"aspect_ratio":0.999,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71hF85he7tL.jpg?v=1647587719","width":1499},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031708852,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71HFaxnzGWL.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71HFaxnzGWL.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031741620,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71AUAT11m9L.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71AUAT11m9L.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031774388,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61JGooyhXKL.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61JGooyhXKL.jpg?v=1647587719","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eUsongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUsongshine 3D printer nozzles MK8 extruder nozzles\nPerfectly circular and with thread size. The extrusion holes are centered and\nconcentric, the bore is smooth, and the threads are clean, connect with M6\nfrom the thread, easy to install, fits the parts exactly. Read more Precise\nsize The 3D printer nozzle through long-term tests to largely solve the\nproblem of clogging and lack of materials, low thermal conductivity, corrosion\nresistance, high abrasion resistance. Consistency standard opening size The\ncleaning needle slides down the nozzle, the nozzle hole has a standard size\nand is easily screwed into the heating block. Applicability and compatibility\nWith the robust and high quality brass material, compatible with all 1.75 mm\nPLA ABS 3D printers. The 3D printer nozzle for more than hours of printing at\n100% flow. Tailor-made for your 3D printer Provide nozzles of various sizes\naround the nozzles for different speed \/ precision combinations to find your\nideal fit. Read more Premium quality Applicability and compatibility Precise\ndesign Read more Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePremium Quality: MK8 nozzles are made of high quality brass material. They are robust and offer a long service life. Easy to install and change. Input diameter 1.75 mm; Screw thread: M6; Hexagon diameter: 6 mm.\u003c\/li\u003e\n \u003cli\u003ePrecise design: 3D printer nozzles can effectively prevent the print head from leaking and produce consistent prints with smooth and glossy varnish. Reduce the resistance at the corners and avoid blocking the filament with a rounded chamfer nozzle.\u003c\/li\u003e\n \u003cli\u003eApplicability and compatibility: MK8 extruder nozzles fit for 3D printer Makerbot Creality CR-10, MK8-Makerbot Reprap Prusa I3, almost compatible with all 1.75 mm PLA ABS 3D printers. Fits exactly like the original.\u003c\/li\u003e\n \u003cli\u003eScope of delivery: The printer nozzles come with 12 0.4mm MK8 nozzles with 5 nozzle cleaning needles.\u003c\/li\u003e\n \u003cli\u003eHigh quality: Usongshine is a company specializing in 3D printers and 3D accessories. All products are subject to strict quality controls before they leave the factory.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4

$74.00 AUD

Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 Usongshine 3D printer nozzles MK8 extruder nozzles Perfectly circular and with thread size. The extrusion holes are centered and concentric, the bore is smooth, and the threads are clean, connect with M6 from the thread, easy to install, fits the part...

Treedix RAMPS 1.4 Control Panel ...

$88.00 AUD

{"id":7086069416116,"title":"Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560","handle":"treedix-ramps-1-4-control-panel-3d-printer-control-board-reprap-control-board-ramps-1-4-mega-shield-compatible-with-arduino-mega-2560","description":"\u003ch3\u003eTreedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the\nentire electronics needed for a RepRap in one small package for low cost.\nRAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and\nhas plenty room for expansion. The modular design includes plug in stepper\ndrivers and extruder control electronics on an Arduino MEGA shield for easy\nservice, part replacement, upgrade-ability and expansion. Additionally, a\nnumber of Arduino expansion boards can be added to the system as long as the\nmain RAMPS board is kept to the top of the stack. Specification: Material:\nMetal Size: about 1063cm\/3.942.361.18in Weight: about 71g\/2.5oz Package\nIncluded： 1 Pcs RAMPS 1.4 Control Panel 3D Printer Control Board Reprap\nControl Board\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRAMPS 1.4 Control Panel is used as driving shield for 3D printers, and it's easy to stack it onto the MEGA 2560 control board.\u003c\/li\u003e\n \u003cli\u003eAssembly and testing without welding.\u003c\/li\u003e\n \u003cli\u003eArduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack\u003c\/li\u003e\n \u003cli\u003eSuitable for 5 Pololu stepper drive boards.\u003c\/li\u003e\n \u003cli\u003e100% brand new and high quality.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:14:12+11:00","created_at":"2022-03-18T18:14:12+11:00","vendor":"Treedix","type":"3D Printer Controllers","tags":["auspowers_batchone"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334015688884,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07ZNFMCSR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560","public_title":null,"options":["Default Title"],"price":8800,"weight":116,"compare_at_price":null,"inventory_management":null,"barcode":"0765756502702","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514","\/\/auspowers.com\/cdn\/shop\/products\/511tCdk_jNL.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51Y3AvQzhgL.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51ljs7Y3V7L.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51rSSpWifgL.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/61Zb6yVhb2L.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51CY7M0bJmL.jpg?v=1647587653"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25346215608500,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514","width":1001},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018339508,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/511tCdk_jNL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/511tCdk_jNL.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018372276,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51Y3AvQzhgL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51Y3AvQzhgL.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018405044,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51ljs7Y3V7L.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51ljs7Y3V7L.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018437812,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51rSSpWifgL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51rSSpWifgL.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018470580,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Zb6yVhb2L.jpg?v=1647587653"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Zb6yVhb2L.jpg?v=1647587653","width":1000},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018503348,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51CY7M0bJmL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51CY7M0bJmL.jpg?v=1647587653","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTreedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the\nentire electronics needed for a RepRap in one small package for low cost.\nRAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and\nhas plenty room for expansion. The modular design includes plug in stepper\ndrivers and extruder control electronics on an Arduino MEGA shield for easy\nservice, part replacement, upgrade-ability and expansion. Additionally, a\nnumber of Arduino expansion boards can be added to the system as long as the\nmain RAMPS board is kept to the top of the stack. Specification: Material:\nMetal Size: about 1063cm\/3.942.361.18in Weight: about 71g\/2.5oz Package\nIncluded： 1 Pcs RAMPS 1.4 Control Panel 3D Printer Control Board Reprap\nControl Board\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRAMPS 1.4 Control Panel is used as driving shield for 3D printers, and it's easy to stack it onto the MEGA 2560 control board.\u003c\/li\u003e\n \u003cli\u003eAssembly and testing without welding.\u003c\/li\u003e\n \u003cli\u003eArduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack\u003c\/li\u003e\n \u003cli\u003eSuitable for 5 Pololu stepper drive boards.\u003c\/li\u003e\n \u003cli\u003e100% brand new and high quality.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560

$88.00 AUD

Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA pl...

3D Printing Build Surface, 8.66"...

$124.00 AUD

{"id":7086069055668,"title":"3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm","handle":"3d-printing-build-surface-8-66-x-8-66-220x220mm-flexible-magnetic-build-platform-for-3d-printer-220x220mm","description":"\u003ch3\u003e3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Color: blue Size: 8.66\" x 8.66\" (220x220mm) Working\ntemperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not\nhigher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a\nbetter direction of magnetism 3、Due to the thickness of the sticker, please\nadjust the height of your Z axis(High temperature of the nozzle will damage\nthe sticker) 4、Compatible with PLA,WOOD,CARBON FIBER,TPU Package includes: 1 x\nA Magnetic Hot Bed Sticker 1 x B Magnetic Hot Bed Sticker\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe magnetic build platform comes in two parts: Part A top side is a matte surface; Part B with adhesive that can stick on your original bed.\u003c\/li\u003e\n \u003cli\u003eRemoving 3D printed parts easy: The magnetic build platform allows you to remove your printed parts in a few seconds from a build plate.\u003c\/li\u003e\n \u003cli\u003eWorking Temperature: can heat less than 80 C. If not it will affects the stability of the working seriously.\u003c\/li\u003e\n \u003cli\u003eCompatible with PLA, wood, PCL and TPU Flexible filaments (sold separately)\u003c\/li\u003e\n \u003cli\u003eSize: 8.66\" x 8.66\" (220x220mm)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:13:32+11:00","created_at":"2022-03-18T18:13:32+11:00","vendor":"HWA KUNG","type":"3D Printer Platforms","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334015000756,"title":"220x220mm","option1":"220x220mm","option2":null,"option3":null,"sku":"B07GTJB7BV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm - 220x220mm","public_title":"220x220mm","options":["220x220mm"],"price":12400,"weight":272,"compare_at_price":null,"inventory_management":null,"barcode":"HK-07","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485","\/\/auspowers.com\/cdn\/shop\/products\/61z9Ftg1U5L.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61hqOs1N7_L.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61GNt0EKlfL.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61p-pJKpEgL.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61IAjDNIy-L.jpg?v=1647587612"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485","options":["Size"],"media":[{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25346209972404,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012342964,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61z9Ftg1U5L.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61z9Ftg1U5L.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012375732,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61hqOs1N7_L.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61hqOs1N7_L.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012408500,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61GNt0EKlfL.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61GNt0EKlfL.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012441268,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61p-pJKpEgL.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61p-pJKpEgL.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012474036,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61IAjDNIy-L.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61IAjDNIy-L.jpg?v=1647587612","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Color: blue Size: 8.66\" x 8.66\" (220x220mm) Working\ntemperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not\nhigher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a\nbetter direction of magnetism 3、Due to the thickness of the sticker, please\nadjust the height of your Z axis(High temperature of the nozzle will damage\nthe sticker) 4、Compatible with PLA,WOOD,CARBON FIBER,TPU Package includes: 1 x\nA Magnetic Hot Bed Sticker 1 x B Magnetic Hot Bed Sticker\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe magnetic build platform comes in two parts: Part A top side is a matte surface; Part B with adhesive that can stick on your original bed.\u003c\/li\u003e\n \u003cli\u003eRemoving 3D printed parts easy: The magnetic build platform allows you to remove your printed parts in a few seconds from a build plate.\u003c\/li\u003e\n \u003cli\u003eWorking Temperature: can heat less than 80 C. If not it will affects the stability of the working seriously.\u003c\/li\u003e\n \u003cli\u003eCompatible with PLA, wood, PCL and TPU Flexible filaments (sold separately)\u003c\/li\u003e\n \u003cli\u003eSize: 8.66\" x 8.66\" (220x220mm)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm

$124.00 AUD

3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer Specification: Color: blue Size: 8.66" x 8.66" (220x220mm) Working temperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not higher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a better direction of magne...

iMetrx (1PCS)42×23MM Nema 17 Ste...

$124.00 AUD

{"id":7086068990132,"title":"iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1","handle":"imetrx-1pcs42-23mm-nema-17-stepper-motor-4-lead-0-7a-high-torque-200mn-m-motor-with-1m-cable-for-diy-cnc-3d-printer-42-23-1","description":"\u003ch3\u003eiMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExcellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the motor structure and achieve the ideal uniform rotation.\u003c\/li\u003e\n \u003cli\u003eLow NoiseThe stepper motor is made of sturdy and durable metal. The perfect combination of rubber and rotor makes the inner structure more stable. This can reduce the vibrations and noise that occur when the engine is running.\u003c\/li\u003e\n \u003cli\u003eLow ResistanceCompared to engines of the same thickness and the same torque, the resistance value of the stepper motor is lower, effectively reducing the heat generation of the motor.\u003c\/li\u003e\n \u003cli\u003eQuality service: iMetrx is a brand specialising in the development and production of 3D printer parts. Each stepper motor nema 17 has been subjected to strict quality control before leaving the factory. If you have quality problems, please contact us in time!\u003c\/li\u003e\n \u003cli\u003ePackage includes: 1PCS motor + extension cable\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:13:27+11:00","created_at":"2022-03-18T18:13:27+11:00","vendor":"iMetrx","type":"3D Printer Motors","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334014869684,"title":"1 \/ 42*23","option1":"1","option2":"42*23","option3":null,"sku":"B09FZ44KH7","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 - 1 \/ 42*23","public_title":"1 \/ 42*23","options":["1","42*23"],"price":12400,"weight":200,"compare_at_price":null,"inventory_management":null,"barcode":"US4223","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481","\/\/auspowers.com\/cdn\/shop\/products\/61XTcqXDPGL_c4537ea9-3683-4bbf-81ba-8c6e1693266a.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/61GSLH35UXL_367033a9-1459-4a86-a67e-4d8587201537.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/61jPcE2YpRS.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/71PCWEmmr1L_be35629b-f5c5-4bb9-8552-8db6f421aa52.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/61lGyUow_JL_447dc70b-11f5-42fe-a114-b0d94d38f0f0.jpg?v=1647587608"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481","options":["Number of Items","Size"],"media":[{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25346209349812,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011261620,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61XTcqXDPGL_c4537ea9-3683-4bbf-81ba-8c6e1693266a.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61XTcqXDPGL_c4537ea9-3683-4bbf-81ba-8c6e1693266a.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011294388,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61GSLH35UXL_367033a9-1459-4a86-a67e-4d8587201537.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61GSLH35UXL_367033a9-1459-4a86-a67e-4d8587201537.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011327156,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61jPcE2YpRS.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61jPcE2YpRS.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011359924,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71PCWEmmr1L_be35629b-f5c5-4bb9-8552-8db6f421aa52.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71PCWEmmr1L_be35629b-f5c5-4bb9-8552-8db6f421aa52.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011392692,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61lGyUow_JL_447dc70b-11f5-42fe-a114-b0d94d38f0f0.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61lGyUow_JL_447dc70b-11f5-42fe-a114-b0d94d38f0f0.jpg?v=1647587608","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eiMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExcellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the motor structure and achieve the ideal uniform rotation.\u003c\/li\u003e\n \u003cli\u003eLow NoiseThe stepper motor is made of sturdy and durable metal. The perfect combination of rubber and rotor makes the inner structure more stable. This can reduce the vibrations and noise that occur when the engine is running.\u003c\/li\u003e\n \u003cli\u003eLow ResistanceCompared to engines of the same thickness and the same torque, the resistance value of the stepper motor is lower, effectively reducing the heat generation of the motor.\u003c\/li\u003e\n \u003cli\u003eQuality service: iMetrx is a brand specialising in the development and production of 3D printer parts. Each stepper motor nema 17 has been subjected to strict quality control before leaving the factory. If you have quality problems, please contact us in time!\u003c\/li\u003e\n \u003cli\u003ePackage includes: 1PCS motor + extension cable\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1

$124.00 AUD

iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer Product Features Excellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the m...

Teyleten Robot New TL-Smoother V...

$84.00 AUD

{"id":7086068596916,"title":"Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)","handle":"teyleten-robot-new-tl-smoother-v1-0-addon-module-for-3d-pinter-motor-drivers-controller-5pcs","description":"\u003ch3\u003eTeyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Name: Stepper Motor Driver Filter TL Smoother Filter\nSize:4x3cm\/1.57x1.18in Material:ABS+Metal Weight:40g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant.\u003c\/li\u003e\n \u003cli\u003eLower vibration lower noise smoother result.\u003c\/li\u003e\n \u003cli\u003eEffectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.\u003c\/li\u003e\n \u003cli\u003eAlso protected against inductance voltages in the unpowered state of the driver.\u003c\/li\u003e\n \u003cli\u003eEliminate vibration stripes effectively, especially on A4988 DRV8825 etc stepper motor driver we have tested.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:12:37+11:00","created_at":"2022-03-18T18:12:37+11:00","vendor":"Teyleten Robot","type":"3D Printer Interface \u0026 Driver Modules","tags":["auspowers_batchone"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334014050484,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B09G4KJWRH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)","public_title":null,"options":["Default Title"],"price":8400,"weight":41,"compare_at_price":null,"inventory_management":null,"barcode":"0768432146757","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459","\/\/auspowers.com\/cdn\/shop\/products\/71oDFIrwotL.jpg?v=1647587557","\/\/auspowers.com\/cdn\/shop\/products\/61BjDjbGopL.jpg?v=1647587557","\/\/auspowers.com\/cdn\/shop\/products\/61nqZ93A32L.jpg?v=1647587557","\/\/auspowers.com\/cdn\/shop\/products\/81Xpx6xD9kL.jpg?v=1647587557"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25346203353268,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459","width":2560},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006608564,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71oDFIrwotL.jpg?v=1647587557"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71oDFIrwotL.jpg?v=1647587557","width":2560},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006641332,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1956,"width":1956,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61BjDjbGopL.jpg?v=1647587557"},"aspect_ratio":1.0,"height":1956,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61BjDjbGopL.jpg?v=1647587557","width":1956},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006674100,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2264,"width":2264,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61nqZ93A32L.jpg?v=1647587557"},"aspect_ratio":1.0,"height":2264,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61nqZ93A32L.jpg?v=1647587557","width":2264},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006706868,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81Xpx6xD9kL.jpg?v=1647587557"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81Xpx6xD9kL.jpg?v=1647587557","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTeyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Name: Stepper Motor Driver Filter TL Smoother Filter\nSize:4x3cm\/1.57x1.18in Material:ABS+Metal Weight:40g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant.\u003c\/li\u003e\n \u003cli\u003eLower vibration lower noise smoother result.\u003c\/li\u003e\n \u003cli\u003eEffectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.\u003c\/li\u003e\n \u003cli\u003eAlso protected against inductance voltages in the unpowered state of the driver.\u003c\/li\u003e\n \u003cli\u003eEliminate vibration stripes effectively, especially on A4988 DRV8825 etc stepper motor driver we have tested.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)

$84.00 AUD

Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) Specification: Name: Stepper Motor Driver Filter TL Smoother Filter Size:4x3cm/1.57x1.18in Material:ABS+Metal Weight:40g Product Features TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especia...

BALITENSEN 260mm x 260mm x 3mm...

$180.00 AUD

{"id":7086068334772,"title":"BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed","handle":"balitensen-260mm-x-260mm-x-3mm-thick-borosilicate-glass-plate-for-3d-printers-glass-bed","description":"\u003ch3\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer\nBuild Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length\ntolerance: +\/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e100% borosilicate glass\u003c\/li\u003e\n \u003cli\u003ePolished edges to improve handling safety\u003c\/li\u003e\n \u003cli\u003eDimensions: 260x260x3mm\u003c\/li\u003e\n \u003cli\u003eCompatiable with Flyingbear P905X, Flsun Cube, A20m 3D Printers\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:12:10+11:00","created_at":"2022-03-18T18:12:10+11:00","vendor":"BALITENSEN","type":"3D Printer Platforms","tags":["auspowers_batchone"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334013657268,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B089F9S9V1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed","public_title":null,"options":["Default Title"],"price":18000,"weight":689,"compare_at_price":null,"inventory_management":null,"barcode":"BG260x260x3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448","\/\/auspowers.com\/cdn\/shop\/products\/41VVPApLNnL.jpg?v=1647587530","\/\/auspowers.com\/cdn\/shop\/products\/311FnjnlIVS.jpg?v=1647587530","\/\/auspowers.com\/cdn\/shop\/products\/31nCvbXDciS.jpg?v=1647587530"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448","options":["Title"],"media":[{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25346200502452,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448","width":1500},{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25201003528372,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41VVPApLNnL.jpg?v=1647587530"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41VVPApLNnL.jpg?v=1647587530","width":1000},{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25201003561140,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/311FnjnlIVS.jpg?v=1647587530"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/311FnjnlIVS.jpg?v=1647587530","width":1000},{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25201003593908,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/31nCvbXDciS.jpg?v=1647587530"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/31nCvbXDciS.jpg?v=1647587530","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer\nBuild Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length\ntolerance: +\/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e100% borosilicate glass\u003c\/li\u003e\n \u003cli\u003ePolished edges to improve handling safety\u003c\/li\u003e\n \u003cli\u003eDimensions: 260x260x3mm\u003c\/li\u003e\n \u003cli\u003eCompatiable with Flyingbear P905X, Flsun Cube, A20m 3D Printers\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed

$180.00 AUD

BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer Build Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length tolerance: +/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1 Product Features ...

Wisamic 3 Pack 220mmx220mm 3D Pr...

$111.00 AUD

{"id":7086067876020,"title":"Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel","handle":"wisamic-3-pack-220mmx220mm-3d-printing-build-surface-heat-bed-with-adhesive-10mm-grid-for-3d-printers-mk2-mk2a-reprap-mendel","description":"\u003ch3\u003eWisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black\nCompatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build\nSurface\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy installation - This 3D printing build surface has plated with adhesive for easy install on your 3D Printer. Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.\u003c\/li\u003e\n \u003cli\u003eMore convenient - Comes with 1cm grid line full printing. Easy to calibrate your 3D printers and the size of your 3D prints. Besides, it is also easy to trim to size with scissors for a smaller print bed.\u003c\/li\u003e\n \u003cli\u003eDimension - 220mm x 220mm; Thickness - 0.5mm\u003c\/li\u003e\n \u003cli\u003eLong life - Single sheet installs quickly with less hassle than film or tape. Long print life per sheet. Extend the life of a sheet by wiping with a magic sponge when needed.\u003c\/li\u003e\n \u003cli\u003eCompatibility - Works well with PLA, PETG, ABS and more filament types. Specially designed to fit the 3D Printers MK2\/MK2A, Reprap, Mendel.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:11:16+11:00","created_at":"2022-03-18T18:11:16+11:00","vendor":"Wisamic","type":"3D Printer Platforms","tags":["auspowers_batchone"],"price":11100,"price_min":11100,"price_max":11100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334012838068,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B078NCZFZ9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel","public_title":null,"options":["Default Title"],"price":11100,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":"H010021","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412","\/\/auspowers.com\/cdn\/shop\/products\/61vk_9AleTL.jpg?v=1647587476","\/\/auspowers.com\/cdn\/shop\/products\/61VRdz3HufL.jpg?v=1647587476","\/\/auspowers.com\/cdn\/shop\/products\/61SqmvRqGGL.jpg?v=1647587476"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25346194505908,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412","width":1200},{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25200995664052,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61vk_9AleTL.jpg?v=1647587476"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61vk_9AleTL.jpg?v=1647587476","width":1200},{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25200995696820,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61VRdz3HufL.jpg?v=1647587476"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61VRdz3HufL.jpg?v=1647587476","width":1200},{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25200995729588,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61SqmvRqGGL.jpg?v=1647587476"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61SqmvRqGGL.jpg?v=1647587476","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eWisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black\nCompatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build\nSurface\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy installation - This 3D printing build surface has plated with adhesive for easy install on your 3D Printer. Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.\u003c\/li\u003e\n \u003cli\u003eMore convenient - Comes with 1cm grid line full printing. Easy to calibrate your 3D printers and the size of your 3D prints. Besides, it is also easy to trim to size with scissors for a smaller print bed.\u003c\/li\u003e\n \u003cli\u003eDimension - 220mm x 220mm; Thickness - 0.5mm\u003c\/li\u003e\n \u003cli\u003eLong life - Single sheet installs quickly with less hassle than film or tape. Long print life per sheet. Extend the life of a sheet by wiping with a magic sponge when needed.\u003c\/li\u003e\n \u003cli\u003eCompatibility - Works well with PLA, PETG, ABS and more filament types. Specially designed to fit the 3D Printers MK2\/MK2A, Reprap, Mendel.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel

$111.00 AUD

Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel Specification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black Compatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build Surface Product Features Easy installation - This 3D printi...

25Pcs 3D Printer Nozzle Kit MK8...

$84.00 AUD

{"id":7086067810484,"title":"25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5","handle":"25pcs-3d-printer-nozzle-kit-mk8-extruder-nozzles-brass-print-head-0-2mm-0-3mm-0-4mm-0-5mm-0-6mm-0-8mm-1-0mm-with-storage-box-compatible-with-3d-printer-makerbot-creality-cr-10-ender-3-5","description":"\u003ch3\u003e25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eApplicability and Compatibility MK8 extruder nozzles fit\nfor 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3,\ncompatible with all 1.75mm PLA ABS 3D printer Precise Size The 3D printer\nnozzle through long-term testing to solve the problem of plugging and missing\nmaterials to the greatest extent, low thermal conductivity, resistant to\ncorrosion, high abrasion resistance. Read more Perfectly Circular and Thread\nThe extrusion holes are centered and concentric, the bore is smooth, and the\nthreads are clean, connect with M6 out the thread, easy to install, it matches\nthe factory parts exactly. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage include--20 pieces MK8 nozzles(0.2mm2,0.3mm2,0.4mm8,.0.5mm2,0.6mm2.0.8mm2,1.0mm2), 5 pieces 3D printer nozzle cleaning needles, the whole set can meet your various needs\u003c\/li\u003e\n \u003cli\u003ePremium Materials--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.\u003c\/li\u003e\n \u003cli\u003eApplicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10,Ender 3 5,MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.\u003c\/li\u003e\n \u003cli\u003ePrecise Design--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.\u003c\/li\u003e\n \u003cli\u003eParameter--Input diameter 1.75mm; output diameter 0.2mm,0.3mm,0.4mm,.0.5mm,0.6mm.0.8mm,1.0mm ; Screw thread: M6;Hexagon diameter: 6mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:11:13+11:00","created_at":"2022-03-18T18:11:13+11:00","vendor":"Fgithk","type":"3D Printer Extruders","tags":["auspowers_batchone"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334012739764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0918Z92TM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5","public_title":null,"options":["Default Title"],"price":8400,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"3d nozzle","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408","\/\/auspowers.com\/cdn\/shop\/products\/61pUvCbbqrL.jpg?v=1647587473","\/\/auspowers.com\/cdn\/shop\/products\/71dQJ_PtffS.jpg?v=1647587473","\/\/auspowers.com\/cdn\/shop\/products\/61Ejie9GK_S.jpg?v=1647587473","\/\/auspowers.com\/cdn\/shop\/products\/61rRtnC7MDS.jpg?v=1647587473"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25346193490100,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408","width":1500},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200994910388,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61pUvCbbqrL.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61pUvCbbqrL.jpg?v=1647587473","width":1000},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200994943156,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71dQJ_PtffS.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71dQJ_PtffS.jpg?v=1647587473","width":1500},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200994975924,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Ejie9GK_S.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Ejie9GK_S.jpg?v=1647587473","width":1000},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200995008692,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61rRtnC7MDS.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61rRtnC7MDS.jpg?v=1647587473","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eApplicability and Compatibility MK8 extruder nozzles fit\nfor 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3,\ncompatible with all 1.75mm PLA ABS 3D printer Precise Size The 3D printer\nnozzle through long-term testing to solve the problem of plugging and missing\nmaterials to the greatest extent, low thermal conductivity, resistant to\ncorrosion, high abrasion resistance. Read more Perfectly Circular and Thread\nThe extrusion holes are centered and concentric, the bore is smooth, and the\nthreads are clean, connect with M6 out the thread, easy to install, it matches\nthe factory parts exactly. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage include--20 pieces MK8 nozzles(0.2mm2,0.3mm2,0.4mm8,.0.5mm2,0.6mm2.0.8mm2,1.0mm2), 5 pieces 3D printer nozzle cleaning needles, the whole set can meet your various needs\u003c\/li\u003e\n \u003cli\u003ePremium Materials--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.\u003c\/li\u003e\n \u003cli\u003eApplicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10,Ender 3 5,MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.\u003c\/li\u003e\n \u003cli\u003ePrecise Design--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.\u003c\/li\u003e\n \u003cli\u003eParameter--Input diameter 1.75mm; output diameter 0.2mm,0.3mm,0.4mm,.0.5mm,0.6mm.0.8mm,1.0mm ; Screw thread: M6;Hexagon diameter: 6mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5

$84.00 AUD

25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 Applicability and Compatibility MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm P...

2Pack A4988 Stepstick Stepper Mo...

$81.00 AUD

{"id":7086067384500,"title":"2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red","handle":"2pack-a4988-stepstick-stepper-motor-driver-module-with-heat-sink-for-3d-printer-controller-ramps-1-4-cnc-machine-or-robotics-red","description":"\u003ch3\u003e2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: The drive current: 2A (best to install the heat sink) 3.3 and\n5 V compatible logic supply five optional step mode: full, 1\/2, 1\/4, 1\/8 and\n1\/16 Features: Low RDS (ON) outputs Automatic current decay mode detection \/\nselection Mixed with slow current decay modes Synchronous rectification for\nlow power dissipation Crossover-current protection Applications: Stepper\nmotors \/3D printer\/CNC\/engraving machines\/Supported 3d printers like Prusa\nMendel, printbot, makerbot and so on. Package Included: 2 x A4988 Stepstick\nStepper Motor Driver Module 2 x Heatsink\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eA4988 is a complete microstepping motor driver with built-in translator for easy operation.\u003c\/li\u003e\n \u003cli\u003eFive different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step,with an output drive capacity of up to 35 V and 2 A.\u003c\/li\u003e\n \u003cli\u003eOver-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.\u003c\/li\u003e\n \u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer.\u003c\/li\u003e\n \u003cli\u003eApplications:A4988 driver board widely used in stepper motors \/3D printer\/CNC\/engraving machines\/Supported 3d printers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:10:30+11:00","created_at":"2022-03-18T18:10:30+11:00","vendor":"Sipytoph","type":"3D Printer Interface \u0026 Driver Modules","tags":["auspowers_batchone"],"price":8100,"price_min":8100,"price_max":8100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334011429044,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0927M328W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red","public_title":null,"options":["Default Title"],"price":8100,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"0770456622155","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0927M328W.jpg?v=1648555383","\/\/auspowers.com\/cdn\/shop\/products\/610SNbEZLML.jpg?v=1647587430","\/\/auspowers.com\/cdn\/shop\/products\/71KKwZzDWZL.jpg?v=1647587430","\/\/auspowers.com\/cdn\/shop\/products\/71hxT7cvg7L.jpg?v=1647587430","\/\/auspowers.com\/cdn\/shop\/products\/61n8qENP5ZL.jpg?v=1647587430"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0927M328W.jpg?v=1648555383","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red ","id":25346188738740,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0927M328W.jpg?v=1648555383"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0927M328W.jpg?v=1648555383","width":1600},{"alt":"[Australia - AusPower] - 2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red ","id":25200983507124,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/610SNbEZLML.jpg?v=1647587430"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/610SNbEZLML.jpg?v=1647587430","width":1600},{"alt":"[Australia - AusPower] - 2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red ","id":25200983539892,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71KKwZzDWZL.jpg?v=1647587430"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71KKwZzDWZL.jpg?v=1647587430","width":1600},{"alt":"[Australia - AusPower] - 2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red ","id":25200983572660,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71hxT7cvg7L.jpg?v=1647587430"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71hxT7cvg7L.jpg?v=1647587430","width":1600},{"alt":"[Australia - AusPower] - 2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red ","id":25200983605428,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61n8qENP5ZL.jpg?v=1647587430"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61n8qENP5ZL.jpg?v=1647587430","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: The drive current: 2A (best to install the heat sink) 3.3 and\n5 V compatible logic supply five optional step mode: full, 1\/2, 1\/4, 1\/8 and\n1\/16 Features: Low RDS (ON) outputs Automatic current decay mode detection \/\nselection Mixed with slow current decay modes Synchronous rectification for\nlow power dissipation Crossover-current protection Applications: Stepper\nmotors \/3D printer\/CNC\/engraving machines\/Supported 3d printers like Prusa\nMendel, printbot, makerbot and so on. Package Included: 2 x A4988 Stepstick\nStepper Motor Driver Module 2 x Heatsink\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eA4988 is a complete microstepping motor driver with built-in translator for easy operation.\u003c\/li\u003e\n \u003cli\u003eFive different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step,with an output drive capacity of up to 35 V and 2 A.\u003c\/li\u003e\n \u003cli\u003eOver-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.\u003c\/li\u003e\n \u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer.\u003c\/li\u003e\n \u003cli\u003eApplications:A4988 driver board widely used in stepper motors \/3D printer\/CNC\/engraving machines\/Supported 3d printers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red

$81.00 AUD

2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red Specifications: The drive current: 2A (best to install the heat sink) 3.3 and 5 V compatible logic supply five optional step mode: full, 1/2, 1/4, 1/8 and 1/16 Features: Low RDS (ON) outputs Automatic current decay mod...

Official Creality New Upgrade Mo...

$220.00 AUD

{"id":7086065352884,"title":"Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard","handle":"official-creality-new-upgrade-motherboard-silent-mainboard-v4-2-7-for-ender-3-customized-and-non-standard-matching-ender-3-silent-mother-board-ender3-silent-mainboard","description":"\u003ch3\u003eOfficial Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis new upgraded silent mainboard does not currently come pre-installed on\nour Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the\nsilent motherboard is a separate upgrade for all 3 Ender’s series 3D Printer.\nThe firmware for the Ender 3 comes pre-installed, but this mainboard works\nexcellent for the Ender 5 as well! For Ender 5, you will need to install\nthe.HEX file yourself. For the Ender 3 Ender 3 Pro , you just plug them in and\nstart printing!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCreality new release silent motherboard V4.2.7 ,32bit, compatible with Ender 3.\u003c\/li\u003e\n \u003cli\u003eSuper quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card \u0026amp; power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.\u003c\/li\u003e\n \u003cli\u003eThermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.\u003c\/li\u003e\n \u003cli\u003eFirmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug \u0026amp; play.\u003c\/li\u003e\n \u003cli\u003eThis silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro\/Ender3 v2\/ Ender-5, need to flash the Ender 3 Pro\/Ender 3 v2\/Ender5 firmware.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:07:00+11:00","created_at":"2022-03-18T18:07:00+11:00","vendor":"Cregrant","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":22000,"price_min":22000,"price_max":22000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334003531956,"title":"Ender3 Silent Mainboard","option1":"Ender3 Silent Mainboard","option2":null,"option3":null,"sku":"B08G4MYYVL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard - Ender3 Silent Mainboard","public_title":"Ender3 Silent Mainboard","options":["Ender3 Silent Mainboard"],"price":22000,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":"CA-3ZB","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280","\/\/auspowers.com\/cdn\/shop\/products\/71aV9kX8B0L.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/61Jloc8NbwL.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/61tXUbt3y-L.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/61FPzjP873L.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/71MqXutrtXL.jpg?v=1647587221"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280","options":["Size"],"media":[{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25346168062132,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280","width":1600},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860364980,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71aV9kX8B0L.jpg?v=1647587221"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71aV9kX8B0L.jpg?v=1647587221","width":1000},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860430516,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Jloc8NbwL.jpg?v=1647587221"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Jloc8NbwL.jpg?v=1647587221","width":1000},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860463284,"position":4,"preview_image":{"aspect_ratio":0.721,"height":1095,"width":790,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61tXUbt3y-L.jpg?v=1647587221"},"aspect_ratio":0.721,"height":1095,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61tXUbt3y-L.jpg?v=1647587221","width":790},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860496052,"position":5,"preview_image":{"aspect_ratio":0.719,"height":1099,"width":790,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61FPzjP873L.jpg?v=1647587221"},"aspect_ratio":0.719,"height":1099,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61FPzjP873L.jpg?v=1647587221","width":790},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860561588,"position":6,"preview_image":{"aspect_ratio":1.426,"height":753,"width":1074,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71MqXutrtXL.jpg?v=1647587221"},"aspect_ratio":1.426,"height":753,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71MqXutrtXL.jpg?v=1647587221","width":1074}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOfficial Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis new upgraded silent mainboard does not currently come pre-installed on\nour Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the\nsilent motherboard is a separate upgrade for all 3 Ender’s series 3D Printer.\nThe firmware for the Ender 3 comes pre-installed, but this mainboard works\nexcellent for the Ender 5 as well! For Ender 5, you will need to install\nthe.HEX file yourself. For the Ender 3 Ender 3 Pro , you just plug them in and\nstart printing!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCreality new release silent motherboard V4.2.7 ,32bit, compatible with Ender 3.\u003c\/li\u003e\n \u003cli\u003eSuper quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card \u0026amp; power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.\u003c\/li\u003e\n \u003cli\u003eThermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.\u003c\/li\u003e\n \u003cli\u003eFirmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug \u0026amp; play.\u003c\/li\u003e\n \u003cli\u003eThis silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro\/Ender3 v2\/ Ender-5, need to flash the Ender 3 Pro\/Ender 3 v2\/Ender5 firmware.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard

$220.00 AUD

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board This new upgraded silent mainboard does not currently come pre-installed on our Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the silent motherboard is a separate upgrade for all 3 ...

Creality 3D Printer 42-40 Steppe...

$147.00 AUD

{"id":7086064206004,"title":"Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series","handle":"creality-3d-printer-42-40-stepper-motor-2-phases-1a-1-8-degrees-0-4-n-m-stepper-motor-for-3d-printer-extruder-compatible-with-e-axis-of-cr-10-series-and-ender-3-series","description":"\u003ch3\u003eCreality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e42-40 motor for the e-axis of the printer of the Creality Ender series and the\nCR series,like Ender3 \/ 3pro \/ 5 \/ 5pro \/ 5plus; CR10 \/ 10MINI \/ 10SProV2 \/\n10S4 \/ 10S5 \/ 10MAX \/ 10V2 \/ 10V3;The motor 42-40 also fits the Y-axis of\nEnder5 \/ 5pro \/ CR-10V2 \/ CR-10SProV2.Material: metalStep angle: 1.8\ndegreesPhase 2Holding torque: 0.4N.MNominal current: 1AShaft diameter: 5mm\n（D-shape）Frame size: 42 42 40mm \/ 1.7 1.7 1.6inItem weight:\n290gPackage list:1 42-40 stepper motor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 \/ Ender 3 Pro \/ CR 10 \/ CR 10S etc.).\u003c\/li\u003e\n \u003cli\u003e1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.\u003c\/li\u003e\n \u003cli\u003eHigh Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.\u003c\/li\u003e\n \u003cli\u003eLow noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.\u003c\/li\u003e\n \u003cli\u003eWhat You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:05:22+11:00","created_at":"2022-03-18T18:05:22+11:00","vendor":"KOYOFEI","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":14700,"price_min":14700,"price_max":14700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334001172660,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B091CXPXVP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series","public_title":null,"options":["Default Title"],"price":14700,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"KYF-3D-021","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205","\/\/auspowers.com\/cdn\/shop\/products\/617bDc4cbkL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61bwyfetBAL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61IsEvCeXYL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61Iofnn5SvL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61oZgHDNzlL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61MUMpyYPcL.jpg?v=1647587122"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25346152890548,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1605,"width":1605,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205"},"aspect_ratio":1.0,"height":1605,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205","width":1605},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800334004,"position":2,"preview_image":{"aspect_ratio":0.8,"height":1500,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/617bDc4cbkL.jpg?v=1647587122"},"aspect_ratio":0.8,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/617bDc4cbkL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800366772,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61bwyfetBAL.jpg?v=1647587122"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61bwyfetBAL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800432308,"position":4,"preview_image":{"aspect_ratio":0.8,"height":1500,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61IsEvCeXYL.jpg?v=1647587122"},"aspect_ratio":0.8,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61IsEvCeXYL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800465076,"position":5,"preview_image":{"aspect_ratio":0.8,"height":1500,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Iofnn5SvL.jpg?v=1647587122"},"aspect_ratio":0.8,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Iofnn5SvL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800497844,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1300,"width":1300,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61oZgHDNzlL.jpg?v=1647587122"},"aspect_ratio":1.0,"height":1300,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61oZgHDNzlL.jpg?v=1647587122","width":1300},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800530612,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1300,"width":1300,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61MUMpyYPcL.jpg?v=1647587122"},"aspect_ratio":1.0,"height":1300,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61MUMpyYPcL.jpg?v=1647587122","width":1300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCreality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e42-40 motor for the e-axis of the printer of the Creality Ender series and the\nCR series,like Ender3 \/ 3pro \/ 5 \/ 5pro \/ 5plus; CR10 \/ 10MINI \/ 10SProV2 \/\n10S4 \/ 10S5 \/ 10MAX \/ 10V2 \/ 10V3;The motor 42-40 also fits the Y-axis of\nEnder5 \/ 5pro \/ CR-10V2 \/ CR-10SProV2.Material: metalStep angle: 1.8\ndegreesPhase 2Holding torque: 0.4N.MNominal current: 1AShaft diameter: 5mm\n（D-shape）Frame size: 42 42 40mm \/ 1.7 1.7 1.6inItem weight:\n290gPackage list:1 42-40 stepper motor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 \/ Ender 3 Pro \/ CR 10 \/ CR 10S etc.).\u003c\/li\u003e\n \u003cli\u003e1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.\u003c\/li\u003e\n \u003cli\u003eHigh Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.\u003c\/li\u003e\n \u003cli\u003eLow noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.\u003c\/li\u003e\n \u003cli\u003eWhat You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series

$147.00 AUD

Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series 42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series,like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / ...

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

Product Features

Related Products

STEPPERONLINE High Torque Nema 1...

STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor

BZ 3D GT2 Timing Belt 6mm...

BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M

Usongshine 12 Pieces 3D Printer ...

Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4

Treedix RAMPS 1.4 Control Panel ...

Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560

3D Printing Build Surface, 8.66"...

3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm

iMetrx (1PCS)42×23MM Nema 17 Ste...

iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1

Teyleten Robot New TL-Smoother V...

Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)

BALITENSEN 260mm x 260mm x 3mm...

BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed

Wisamic 3 Pack 220mmx220mm 3D Pr...

Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel

25Pcs 3D Printer Nozzle Kit MK8...

25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5

2Pack A4988 Stepstick Stepper Mo...

2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red

Official Creality New Upgrade Mo...

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard

Creality 3D Printer 42-40 Steppe...

Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series

100% POSITIVE FEEDBACK - LEARN MORE

Contact Us

Footer menu

AUSPOWER AU

Shopping Cart

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

Product Features

Related Products

STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor

BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M

Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4

Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560

3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm

iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1

Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)

BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed

Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel

25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5

2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard

Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series

100% POSITIVE FEEDBACK - LEARN MORE

Contact Us

Footer menu

AUSPOWER AU