{"id":7102361436340,"title":"Morris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2\/0 - 6 Main Range, 8 - 14 Tap Range 2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range","handle":"morris-products-96102-above-ground-insulation-piercing-connector-1-port-2-0-6-main-range-8-14-tap-range-2-0-6-main-range-8-1-4-tap-range","description":"\u003ch3\u003eMorris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2\/0 - 6 Main Range, 8 - 14 Tap Range\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDouble shear-head bolt guarantees correct torque tightening every time,\nensuring a quality connection, \u0026amp; eliminating the possibility of hot spots,\ndamaged wires or loose connections. No cable stripping required, simply insert\nthe jacketed cable into the entry port \u0026amp; tighten with a 1\/2” 6 point socket.\nRed Turbo spacer allows tap side to remain open while you hand tighten the\nabove ground connector on the main wire (all models except 96102 \u0026amp; 96104).\nBlue Rubber Insert recreates insulation when used on bare wire. Used to avoid\nany damage on neutral messenger. (Only on Models 96106, 96110, 96112, 96114).\nThe bolt and all external parts of the connector are completely isolated from\nenergized parts and the bolt is covered by the plastic shear-head. The\ninstaller has no contact at any point with an energized part. Can be installed\non energized conductors, however, the tap must not be under load. Corrosion-\nfree connection is good for hot, cold, damp, \u0026amp; salty connections. Properly\ninstalled the connector seals water-tight. This is accomplished by a sealant\ntank, that during installation is compressed and forces sealant out to protect\nthe connection from oxygen and water. Copper teeth are tin plated, shell is\nhigh strength UV resistant thermoplastic insulating material, steel bolts are\ngalvanized. The connector bodies are made from high-strength fiber-reinforced\nthermoplastic and galvanized steel bolts. UL486B Listed for cu to cu, al to\nal, \u0026amp; cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements.\nModel 's: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108\n(TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114\n(TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT),\n96122 (TTD5510FBT). .\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eINSTALLS IN MINUTES: Find convenience and durability with these above ground insulation piercing connectors that install in just minutes to eliminate wire stripping, connecting and taping of split bolts and adding inhibitors.\u003c\/li\u003e\n \u003cli\u003eISOLATED SOLUTION: Offering a corrosion-free connection, each above ground insulation piercing connector is isolated from energized parts and has no contact at any point to an energized part due to the tin-plated copper teeth and high-strength sealant.\u003c\/li\u003e\n \u003cli\u003eCORRECT TORQUE TIGHTENING: No cable stripping is required when using these connectors that are equipped with a double shear-head bolt and red turbo spacer that allows the tap side to remain open.\u003c\/li\u003e\n \u003cli\u003eABOVE GROUND CONNECTOR: Utilize this above ground insulation piercing connector on energized circuits to eliminate power shutdowns and on overhead services, such as street lighting, ensuring a quality connection without hot spots, loose connections or damaged wires.\u003c\/li\u003e\n \u003cli\u003eCOLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-04-04T04:11:12+10:00","created_at":"2022-04-04T04:11:12+10:00","vendor":"Morris Products","type":"Batteries","tags":["auspowers_batchfour"],"price":14500,"price_min":14500,"price_max":14500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41380015866036,"title":"2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range","option1":"2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range","option2":null,"option3":null,"sku":"B005GVGI3Q","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Morris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2\/0 - 6 Main Range, 8 - 14 Tap Range 2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range - 2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range","public_title":"2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range","options":["2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range"],"price":14500,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"601986961028","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B005GVGI3Q.jpg?v=1649788954","\/\/auspowers.com\/cdn\/shop\/products\/81K13RUZoFL.jpg?v=1649009472"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B005GVGI3Q.jpg?v=1649788954","options":["Size"],"media":[{"alt":"[Australia - AusPower] - Morris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2\/0 - 6 Main Range, 8 - 14 Tap Range 2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range ","id":25532533604532,"position":1,"preview_image":{"aspect_ratio":0.772,"height":1969,"width":1521,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B005GVGI3Q.jpg?v=1649788954"},"aspect_ratio":0.772,"height":1969,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B005GVGI3Q.jpg?v=1649788954","width":1521},{"alt":"[Australia - AusPower] - Morris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2\/0 - 6 Main Range, 8 - 14 Tap Range 2\/0 - 6 Main Range \/ 8 - 1 4 Tap Range ","id":25416527151284,"position":2,"preview_image":{"aspect_ratio":0.755,"height":1931,"width":1457,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81K13RUZoFL.jpg?v=1649009472"},"aspect_ratio":0.755,"height":1931,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81K13RUZoFL.jpg?v=1649009472","width":1457}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMorris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2\/0 - 6 Main Range, 8 - 14 Tap Range\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eDouble shear-head bolt guarantees correct torque tightening every time,\nensuring a quality connection, \u0026amp; eliminating the possibility of hot spots,\ndamaged wires or loose connections. No cable stripping required, simply insert\nthe jacketed cable into the entry port \u0026amp; tighten with a 1\/2” 6 point socket.\nRed Turbo spacer allows tap side to remain open while you hand tighten the\nabove ground connector on the main wire (all models except 96102 \u0026amp; 96104).\nBlue Rubber Insert recreates insulation when used on bare wire. Used to avoid\nany damage on neutral messenger. (Only on Models 96106, 96110, 96112, 96114).\nThe bolt and all external parts of the connector are completely isolated from\nenergized parts and the bolt is covered by the plastic shear-head. The\ninstaller has no contact at any point with an energized part. Can be installed\non energized conductors, however, the tap must not be under load. Corrosion-\nfree connection is good for hot, cold, damp, \u0026amp; salty connections. Properly\ninstalled the connector seals water-tight. This is accomplished by a sealant\ntank, that during installation is compressed and forces sealant out to protect\nthe connection from oxygen and water. Copper teeth are tin plated, shell is\nhigh strength UV resistant thermoplastic insulating material, steel bolts are\ngalvanized. The connector bodies are made from high-strength fiber-reinforced\nthermoplastic and galvanized steel bolts. UL486B Listed for cu to cu, al to\nal, \u0026amp; cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements.\nModel 's: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108\n(TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114\n(TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT),\n96122 (TTD5510FBT). .\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eINSTALLS IN MINUTES: Find convenience and durability with these above ground insulation piercing connectors that install in just minutes to eliminate wire stripping, connecting and taping of split bolts and adding inhibitors.\u003c\/li\u003e\n \u003cli\u003eISOLATED SOLUTION: Offering a corrosion-free connection, each above ground insulation piercing connector is isolated from energized parts and has no contact at any point to an energized part due to the tin-plated copper teeth and high-strength sealant.\u003c\/li\u003e\n \u003cli\u003eCORRECT TORQUE TIGHTENING: No cable stripping is required when using these connectors that are equipped with a double shear-head bolt and red turbo spacer that allows the tap side to remain open.\u003c\/li\u003e\n \u003cli\u003eABOVE GROUND CONNECTOR: Utilize this above ground insulation piercing connector on energized circuits to eliminate power shutdowns and on overhead services, such as street lighting, ensuring a quality connection without hot spots, loose connections or damaged wires.\u003c\/li\u003e\n \u003cli\u003eCOLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

Morris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2/0 - 6 Main Range, 8 - 14 Tap Range 2/0 - 6 Main Range / 8 - 1 4 Tap Range

In Stock. Leaves warehouse within 2 - 3 business days

$145.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

Morris Products 96102 Above Ground Insulation Piercing Connector, 1 Port, 2/0 - 6 Main Range, 8 - 14 Tap Range

Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections. No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket. Red Turbo spacer allows tap side to remain open while you hand tighten the above ground connector on the main wire (all models except 96102 & 96104). Blue Rubber Insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger. (Only on Models 96106, 96110, 96112, 96114). The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part. Can be installed on energized conductors, however, the tap must not be under load. Corrosion- free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized. The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts. UL486B Listed for cu to cu, al to al, & cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements. Model 's: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT). .

Product Features

  • INSTALLS IN MINUTES: Find convenience and durability with these above ground insulation piercing connectors that install in just minutes to eliminate wire stripping, connecting and taping of split bolts and adding inhibitors.
  • ISOLATED SOLUTION: Offering a corrosion-free connection, each above ground insulation piercing connector is isolated from energized parts and has no contact at any point to an energized part due to the tin-plated copper teeth and high-strength sealant.
  • CORRECT TORQUE TIGHTENING: No cable stripping is required when using these connectors that are equipped with a double shear-head bolt and red turbo spacer that allows the tap side to remain open.
  • ABOVE GROUND CONNECTOR: Utilize this above ground insulation piercing connector on energized circuits to eliminate power shutdowns and on overhead services, such as street lighting, ensuring a quality connection without hot spots, loose connections or damaged wires.
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.

Related Products