Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2" X 1/2" X 14tpi for Cutting Soft Ferrous Metal
Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2" X 1/2" X 14tpi for Cutting Soft Ferrous Metal
Imachinist New Bandsaw Blade 64-1/2" X 1/2" X 0.025" X 14tpi Blade Length: 64-1/2" or 64.5" Blade Width: 1/2" or 13 mm Blade Thickness: 0.025" or 0.65 mm Blade Teeth: 14tpi (constant pitch) Teeth Form: null raker Include: 1 piece of 64-1/2" x 1/2" x 0.025" x 14tpi band saw blade Suitable: for general purpose Click here for 64-1/2", 6TPI Click here for 64-1/2", 6/10TPI Click here for 64-1/2", 8/12TPI Click here for 64-1/2", 10/14TPI Click here for 64-1/2", 14/18TPI Click here for 64-1/2", 24TPI Blade Length 64.5 Inch 64.5 Inch 64.5 Inch 64.5 Inch 64.5 Inch 64.5 Inch Blade Width 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch 0.5 Inch Blade Thickness 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch 0.025 Inch Blade Teeth 6TPI 6/10TPI 8/12TPI 10/14TPI 14/18TPI 24TPI Pitch constant pitch variable pitch variable pitch variable pitch variable pitch constant pitch Suitable for ferrous solid rod with small diameter aluminum, copper, brass etc and other non-ferrous metal ferrous thick tubing, profile, sheet, plate etc ferrous thick tubing, profile, sheet, plate etc ferrous thin tubing, profile, sheet, plate etc ferrous thin tubing, plate, sheet etc, don't cut non-ferrous metal, like aluminum etc SKU S6412126 S641212610 S641212812 S6412121014 S6412121418 S64121224 Read more Cold Rolling We use imported cold rolling machine to cold roll the band saw blade strip Milling We use imported milling machine to mill teeth for the blade, making sure teeth are sharp and durable while cutting metal Heat Treatment With heat treating on the imported heat treatment machines, the teeth are more hard, more tensive to resist hit and power from the metal. Blade are more durable after heat treating. Welding The last step is welding the blade after cutting it to correct size, the welding joint looks much perfect after welding it on high quality imported welding machine, blade life could improve a lot. Cold Rolling Milling Heat Treatment Welding Welding Joint We weld blades with high performance welding machine to make sure welding joint looks perfect. Teeth Direction Default teeth direction is rightward, if you want leftward direction, please twist the blade from inside to outside. Original Package Brand new with original package for this blade with tips behind blade pacakge to help customers. Read more How to Improve Life Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.Running-in is required when blade cuts metal for the first time. It's important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.Teeth selection is also important, here are our experience: big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;small constant teeth (14TPI) is for general purpose;small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, don't cut non-ferrous metal, like aluminum etc.
Product Features
- Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14TPI teeth profile
- Perfect for cutting soft ferrous metal
- 14TPI is suitable for cutting thin pipe tube profiles etc
- 14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth
- Suits all bandsaws which use 64-1/2" long, 1/2" wide band saw blade