HiLetgo 2pcs A3967 Stepper Motor Drive Board EasyDriver Stepper Motor Driver for Arduino Raspberry Pi Robot
HiLetgo 2pcs A3967 Stepper Motor Drive Board EasyDriver Stepper Motor Driver for Arduino Raspberry Pi Robot
Instruction: A3967slb is pwm constant current control micro-step drive two- phase stepper motor dedicated drive. Its operating voltage up to 30v, the drive current up to 750ma, a3967slb can drive a two-phase stepper motor, enabling subdivision drive. Chip internal pwm current control circuit can be set by the pfd voltage is set to slow, fast, mixed three current decay mode, if the pfd side of the voltage is higher than 0.6vdd, then choose slow decay mode. If less than 0.21vdd, then select the fast decay mode. Between the two is the hybrid decay mode. In addition, a3967slb also provides comprehensive protection measures, including the suppression of transient voltage, thermal protection, to prevent current through, under voltage self-locking and other functions. a3967slb and the microprocessor does not need to add other interface circuit, the chip mining easystepper Interface, the 8 control lines reduced by 2 (step and direction), simply enter the pulse control stepper motor, the embedded converter can be achieved on the stepper motor control. A3967slb also need some resistance, capacitance to adjust its operating parameters, the entire drive circuit is very simple. Note:When the drive is energized, do not connect or disconnect the motor. This will cause permanent damage to the A3967IC. Package Included: 2pcs A3967 Stepper Motor Driver Board EasyDriver Stepper Motor Driver V44
Product Features
- The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
- EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
- The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
- Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control.
- EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
Related Products
DC 4V-6V 5V 2-phase 4-wire 6-wir...
DC 4V-6V 5V 2-phase 4-wire 6-wire Micro Stepper Motor Driver Controller Board Mini Stepping Motor CW CCW Control Module Forward Backward Mini Module
$93.00 AUD
DC 4V-6V 5V 2-phase 4-wire 6-wire Micro Stepper Motor Driver Controller Board Mini Stepping Motor CW CCW Control Module Forward Backward Specification: Input Power: DC4-6V/500mA (can be directly powered by USB) Driving Motor: 2-phase 4-wire or 6-wire motor PCB Size: 522511mm / 2.00.980.43inch Cable Length: 200mm/7.87inch Work Mode: press one tim...
HiLetgo 2000W PWM AC Motor Speed...
HiLetgo 2000W PWM AC Motor Speed Control Module Dimmer Speed Regulator 50-220V Adjustable Voltage Regulator
$81.00 AUD
HiLetgo 2000W PWM AC Motor Speed Control Module Dimmer Speed Regulator 50-220V Adjustable Voltage Regulator Specifications: This controller uses novel bi-directional high-power SCR. It can be very convenient adjust the current up to 25A, and solve the over current problem of the heating wire resistance is too small in the case of cooling causing...
uxcell KSD301 Thermostat 40°C/10...
uxcell KSD301 Thermostat 40°C/104°F 10A Normally Open N.O Adjust Snap Disc Temperature Switch 5pcs
$89.00 AUD
uxcell KSD301 Thermostat 40°C/104°F 10A Normally Open N.O Adjust Snap Disc Temperature Switch 5pcs Product Features Type: KSD301 40 degrees Celsius Thermal Control Switch 110V/120V/250V 10A NO (Normal Open), 6.3mm pin Normally Open: The original state of temperature control switch contact is open, and closed when the temp...
Qunqi L298N Motor Drive Controll...
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
$84.00 AUD
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino Product Features Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip,...
10000W SCR Digital Voltage Regul...
10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat
$167.00 AUD
10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat Specifications: Voltage: AC 220V Max Power: 10000W(instantaneous limit power for impedance load; for long time use, 5000w or lower is recommended) Voltage Adjustment: 0-100% (nonlinear) Controller Size: 95...
DC 5-12V/15-160V Stepper Motor D...
DC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator
$111.00 AUD
DC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator Specification: Power supply voltage: 15-160V / 5-12V Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch Weight: 50g Quantity: 1pc Package List: 1 x PWM Generator Note: ...
Hilitchi KSD301 20Pcs NO and NC...
Hilitchi KSD301 20Pcs NO and NC Thermostat Temperature Thermal Control Switch Auto Reset 40C to 135C Thermal Control Switch Assortment Kit with Bimetal Disc. for Household Electric Appliances
$130.00 AUD
Hilitchi KSD301 20Pcs NO and NC Thermostat Temperature Thermal Control Switch Auto Reset 40C to 135C Thermal Control Switch Assortment Kit with Bimetal Disc. for Household Electric Appliances KSD301 20Pcs NO NC Thermostat Temperature Thermal Switch Specification: Brand New Type:KSD301 -Action type: Normally Close and Open, Auto Reset. -Opening-c...
Qunqi 2Packs L298N Motor Drive C...
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
$91.00 AUD
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino Product Features Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizin...
Kids Masks Washable 6 Pack, Kid...
Kids Masks Washable 6 Pack, Kid Cloth Masks Reusable Childrens Cotton Breathable Adjustable Face Mask for Boys Girls Child with Filter Pocket for 5-12 Years Old
$124.00 AUD
Kids Masks Washable 6 Pack, Kid Cloth Masks Reusable Childrens Cotton Breathable Adjustable Face Mask for Boys Girls Child with Filter Pocket for 5-12 Years Old 6 PACK KIDS CLOTH FACE MASK FOR EVERYDAY WEAR Product Features 70% Pure Cotton/ 30% Polyester 6 BRIGHT COLORS FOR DAILY WEAR: 6 pack of kids reusable face mask wit...
HiLetgo L293D DC Motor Drive Shi...
HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi
$84.00 AUD
HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi Features: 1. to 4 bidirectional DC motors and 4 PWM speed controllers (approximately 0.5% resolution) 2. Up to 2 stepper motor forward and reverse control, single / double step control, staggered or micro-step and rotation angle co...
RuiLing 5-Pack KSD301 40 Degrees...
RuiLing 5-Pack KSD301 40 Degrees Centigrade Thermostat Thermal Control Switch 250V 10A Normally Closed NC Thermostat Temperature Switch
$84.00 AUD
RuiLing 5-Pack KSD301 40 Degrees Centigrade Thermostat Thermal Control Switch 250V 10A Normally Closed NC Thermostat Temperature Switch Basic info: Name: Thermostat Thermal Control Switch Model: KSD301 Rated temperature: 40 degrees centigrade Action Type: NC (Normally Closed) Rated Voltage: 250 Volt Rated Current: 10 Amp Description: 1.Double me...
HiLetgo 12V~40V 10A PWM DC Motor...
HiLetgo 12V~40V 10A PWM DC Motor Speed Control Switch Controller Voltage Regulator Dimmer for Arduino
$86.00 AUD
HiLetgo 12V~40V 10A PWM DC Motor Speed Control Switch Controller Voltage Regulator Dimmer for Arduino Important: This is DC motor controller, please make sure the input voltage is from DC power, do not use home 220V AC, otherwise it will burn out. The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modula...
PWM DC Motor Speed Controller, D...
PWM DC Motor Speed Controller, DC10-55V/60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display
$157.00 AUD
PWM DC Motor Speed Controller, DC10-55V/60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display Specifications Size: 5.03 x 3.85 x 0.74 inch/ 128 x 98 x 19mm Forward & Reverse: Support Supply/load voltage: DC 10-55V Maximum current: 60A Continuous Current: 40A PWM frequency: 15KHZ Spe...