FYSETC 3D Printing Flexible Platform Only Spring Steel Sheet Sticked with PEI 230 x150mm/9.0x5.9 inch No Magnetic Base Heated Bed Plate Compatible with Replicatr QIDI X-Pro Creator Pro
FYSETC 3D Printing Flexible Platform Only Spring Steel Sheet Sticked with PEI 230 x150mm/9.0x5.9 inch No Magnetic Base Heated Bed Plate Compatible with Replicatr QIDI X-Pro Creator Pro
PEI Sheet Use: Thickness: 0.17mm Compatible with PLA ABS PETG TPU and other most filaments. When the print is completed, let the bed cool, flex and pop, then the part will be easy to remove from the PEI surface. PEI Sheet Maintenance: Clean it between prints with isopropyl alcohol and a lint free rag. Acetone can be used instead of isopropyl alcohol, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life or lightly scour the surface of the PEI with some mild steel woolwith 400 grit, have great adhesion. Package Includes: 1X 230x150mm/9.0x5.9 inch Steel Spring with PEI
Product Features
- It's only spring steel plate with PEI, Size:230 x150mm/9.0x5.9 inch. The PEI side is for printing on. Not come with magnetic base, can't use alone! Except for the magnetic heatbed.
- Special-coated FlexPlates are resistant to rust and can directly work on the 3D printes which own the magnetic heatbed. The FlexPlate is engineered to maintain its shape for a long time.
- The side with PEI looks a little yellow is for printing. Before using, please peel off the protective film on the PEI surface. Finishing the printing, let it cool down, then flex and pop your prints off, easily to remove it from the FlexPlate.
- Kindly Tips: This is the steel plate with PEI only and we stick PEI by machine, so you don't need to worry about the bubbles. if you receive the package but find the air bubbles or Scratches, please don't worry, they are on the surface layer, PEI will not be affected.
Related Products
STEPPERONLINE High Torque Nema 1...
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor
$159.00 AUD
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part Number: 17HS24-2104S Motor Type:...
BZ 3D GT2 Timing Belt 6mm...
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M
$124.00 AUD
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service! Product Features Upg...
Usongshine 12 Pieces 3D Printer ...
Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4
$74.00 AUD
Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 Usongshine 3D printer nozzles MK8 extruder nozzles Perfectly circular and with thread size. The extrusion holes are centered and concentric, the bore is smooth, and the threads are clean, connect with M6 from the thread, easy to install, fits the part...
Treedix RAMPS 1.4 Control Panel ...
Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560
$88.00 AUD
Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA pl...
3D Printing Build Surface, 8.66"...
3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm
$124.00 AUD
3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer Specification: Color: blue Size: 8.66" x 8.66" (220x220mm) Working temperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not higher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a better direction of magne...
iMetrx (1PCS)42×23MM Nema 17 Ste...
iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(>200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1
$124.00 AUD
iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(>200mN.m) Motor with 1M Cable for DIY CNC 3D Printer Product Features Excellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the m...
Teyleten Robot New TL-Smoother V...
Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)
$84.00 AUD
Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) Specification: Name: Stepper Motor Driver Filter TL Smoother Filter Size:4x3cm/1.57x1.18in Material:ABS+Metal Weight:40g Product Features TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especia...
BALITENSEN 260mm x 260mm x 3mm...
BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed
$180.00 AUD
BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer Build Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length tolerance: +/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1 Product Features ...
Wisamic 3 Pack 220mmx220mm 3D Pr...
Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel
$111.00 AUD
Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel Specification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black Compatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build Surface Product Features Easy installation - This 3D printi...
25Pcs 3D Printer Nozzle Kit MK8...
25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5
$84.00 AUD
25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 Applicability and Compatibility MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm P...
2Pack A4988 Stepstick Stepper Mo...
2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red
$81.00 AUD
2Pack A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Controller Ramps 1.4 CNC Machine or Robotics,Red Specifications: The drive current: 2A (best to install the heat sink) 3.3 and 5 V compatible logic supply five optional step mode: full, 1/2, 1/4, 1/8 and 1/16 Features: Low RDS (ON) outputs Automatic current decay mod...
Official Creality New Upgrade Mo...
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard
$220.00 AUD
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board This new upgraded silent mainboard does not currently come pre-installed on our Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the silent motherboard is a separate upgrade for all 3 ...
Creality 3D Printer 42-40 Steppe...
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series
$147.00 AUD
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series 42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series,like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / ...