for ArduinoIDE, Longruner 20x4 LCD Display Module IIC/I2C/TWI Serial 2004 with Screen Panel Expansion Board White on Blue, 4 pin Jump Cables Wire Included
for ArduinoIDE, Longruner 20x4 LCD Display Module IIC/I2C/TWI Serial 2004 with Screen Panel Expansion Board White on Blue, 4 pin Jump Cables Wire Included
2018 latest high-quality I2C LCD2004-character LCD display module, a new high- quality 4 line 20 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC/I2C communication interface. With IIC/I2C interface, it only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back. For ArduinoIDE beginners, not for the cumbersome and complex LCD driver circuit connection and a headache, the real significance of this LCD module will simplify the circuit, this module directly into the ArduinoIDE Sensor Shield V5. 0 sensor expansion board IIC device interface can, GM 4P sensor connection cable, programmed through the ArduinoIDE controller, you can easily identify the slogan, sensor data records. With this shield, you can display whatever you want by programming the ArduinoIDE board. Therefore, this is a perfect choice to make your project more interesting and vivid!
Product Features
- Practical: LCD display module based on the popular HD44780 controller, works great with ArduinoIDE and other micro-controllers
- High display function: 20 characters display in one row, 4 rows can display 80 characters
- Convenient: Tutorials/instructions can be get freely by email
- Extra presents: 4 pin male to female jump cables, 4 Fixed LCD Panel nylon columns and 4 screws
- Specification: working voltage: 5V DC; Dimension: 60x99x22 mm. IIC/I2C interface; only takes two I/O ports. I2C Address: 0x27 or 0x3F
Related Products
PEMENOL 5PCS OLED Display Module...
PEMENOL 5PCS OLED Display Module for Arduino, 0.96 Inch I2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Raspberry Pi and ESP8266 - White Light
$134.00 AUD
PEMENOL 5PCS OLED Display Module for Arduino, 0.96 Inch I2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Raspberry Pi and ESP8266 - White Light PEMENOL is a franchised store that has long been engaged in the wholesale and retail business of electronic related products. PEMENOL 5PCS OLED Display Module can be widely used wi...
uxcell Common Cathode 10 Pin 1...
uxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55" Red LED Display Digital Tube 10pcs
$91.00 AUD
uxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55" Red LED Display Digital Tube 10pcs Used widely in home appliances, instruments, accessories, etc.specificationsProduct Name : LED Digital Display TubeType : Common CathodeModel : 5611AHCommon Cathode : 3-8Digital Display : 1 DigitDigital Number : 1 Bit 7 SegmentEmitted Col...
HiLetgo 1602 LCD Keypad Shield 1...
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot
$87.00 AUD
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot 1602 LCD module read and write operations, screen and cursor operations are programmed to achieve through the instructions. Note: 1- High level, 0 -Low level) Instruction1: clear display, instruction 01H, cursor reset to address 0...
HiLetgo 2pcs MAX7219 8-Digital S...
HiLetgo 2pcs MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32
$83.00 AUD
HiLetgo 2pcs MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32 Features: MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 digit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD ...
HiLetgo 2004 20X4 LCD Display LC...
HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi
$93.00 AUD
HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi Features: IIC/I2C interface was developed to reduce the IO port usage on Arduino board. Old 1602 screen requires 7 IO ports but this module uses only two. Much needed control panel IO ports can be used to add some sensors, SD ca...
6.08 Inches Monochrome 2K LCD Sc...
6.08 Inches Monochrome 2K LCD Screen for ELEGOO Mars 2/Mars 2 Pro/Voxelab Proxima Resin 3D Printers, 1620x2560 Resolution Without Touch Panel 6.08'' (with Glass)
$243.00 AUD
6.08 Inches Monochrome 2K LCD Screen for ELEGOO Mars 2/Mars 2 Pro/Voxelab Proxima Resin 3D Printers, 1620x2560 Resolution Without Touch Panel 6.08 inch Product Features
MakerFocus TFT LCD Screen Displa...
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240 * 240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY
$104.00 AUD
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240 * 240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously c...
diymore 5 Packs Red/Green/White/...
diymore 5 Packs Red/Green/White/Yellow/Blue Colors TM1637 0.56" LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Dots Module Serial Driver Board(5 Colors) 5 Colors
$113.00 AUD
diymore 5 Packs Red/Green/White/Yellow/Blue Colors TM1637 0.56" LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Dots Module Serial Driver Board(5 Colors) Package Included: 5pcs x TM1637 7-Segment 4-Digit 0.56" LED Display Colon Module Clock Digital Tube Serial Driver Board (5 colors) Specification: This module is a 12 foot with c...
HiLetgo 2pcs 0.36" 4-Digit Tube ...
HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3
$83.00 AUD
HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3 Description: The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver TM1637; only two signal lines can make the MCU control 4 bits 8 digital tube. Parameter: Supply vol...
HiLetgo 3.5" TFT LCD Display ILI...
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
$126.00 AUD
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560 Features: 1.Brand new and high quality. 2.Module Size: 96.6 (w) 60.3 (L) (mm) 3.Effective display size: 73.44 48.98mm 4.Screen size: 3.5 inches 5.Backlight Type: bright white 6LED 6.Screen resolution: 480 320 (Pixel) 7.Screen type: TFT 8.Module power supply: 5V ...
HiLetgo 1.3" SPI 128x64 SSH1106 ...
HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32
$91.00 AUD
HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32 Product Features 1.3" mini OLED display screen with 128X64 resoluction and SSH1106 chipset Ultra-low power consumption: full screen lit 0.08w Four fixed bolt holes for easy installation Interface Type:SPI(Can be changed to ...
HiLetgo ILI9341 2.8" SPI TFT LCD...
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
$119.00 AUD
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32 100% brand new and high qualityType: touch panelSize:2.8" SPI SerialDisplay area:36.72(W)X48.96(H)mmSize:8.5 x 4.8cmDriver element: a-Si TFT active matrixPixel arrangement: RGB vertical stripeDriver IC: ILI9341Backlight: White LEDViewing Direction: 6 o'clockColor...
6.08 Inches Mono LCD Screen for...
6.08 Inches Mono LCD Screen for Anycubic Photon Mono/Mono SE, 2K Light Curing Print Screen Replacement, with 1620x2560 Resolution (Interface Type: MIPI-4 Lane/03) Interface Type: MIPI-4 Lane/03
$283.00 AUD
6.08 Inches Mono LCD Screen for Anycubic Photon Mono/Mono SE, 2K Light Curing Print Screen Replacement, with 1620x2560 Resolution (Interface Type: MIPI-4 Lane/03) This lcd screen can use for Anycubic Photon MONO. For MONO SE you need this screen to work with the original adaptor. Shipping List: 1 X LCD Screen 1 X Tape Please note: All the brands...