English 10 Frequency NFC RFID Card Copier Writer Reader Duplicator for IC ID Cards and All 125kHz Cards,10 Pcs ID 125khz Cards + 10pcs ID 125kh Key Fobs + 10pcs 13.56mhz IC Key + 1 USB
English 10 Frequency NFC RFID Card Copier Writer Reader Duplicator for IC ID Cards and All 125kHz Cards,10 Pcs ID 125khz Cards + 10pcs ID 125kh Key Fobs + 10pcs 13.56mhz IC Key + 1 USB
Description
NOTE: 1. The software of our machine is only compatible with Windows system, not working with MAC system or Linux system.2. It doesn't work for fully- encrypted cards. By its decoding software, it may work for most half-encrypted cards, but not all.3. The machine is plugged into the computer, there is a disclaimer when it is turned on. At this time, do not press the "OK" button on the machine. Enter my computer, open the removable disk and display the software and manual word files, the software instructions inside are copied to the computer. Double-click to open the software, and then press the "OK" button on the machine. (NOTE: if you press the "OK" button before opening the software, the software will not be displayed).How to Copy a an unencrypted card:1. Press “on/off "button to start up, a disclaimer will pop up. Press“Ok” button to enter the card reading interface. 2. Place the card to be copied in the sensor area. Press the"scan" button, card frequency and card number will be displayed. Card reading successful. Replace blank card in the sensor area press the"write" button, complete duplication unencrypted cards.How to cpoy a Partly encrypted card :1. Place the card to be copied in the sensor area. When the screen displayed “Card encryption, please connect computer decoder”. Link to the computer(windows only) via an USB cable for decoding. 2. Open the disk by clicking the icon, run the software. 3. Press the “confirm” key to enter the card reading interface.4. Put the encryption card in the sensor area. Click "start decoding "to crack the password. General decoding process is within 10 to 20 min.5. After decoding successful, replace blank card in the sensor area. Press the “write” button, encrypted cards duplication will be completed.
Features:
- SUPPORT 10 FREQUENCY: ID-125KHz, ID-250KHz, ID-375KHz, ID-500KHz, ID-625KHz, ID-750KHz, ID-875KHz, ID-1000KHZ, IC13.56MHz (ISO1443A/B), HID125kHz Prox cards.
- NOTE: The software of our machine is only compatible with Windows system, not working with MAC system or Linux system; It doesn't work for fully-encrypted cards. By its decoding software, it may work for most half-encrypted cards, but not all.
- Support read: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, 1386/1326/1346; Support cards write: 1386/1326/1346, T5577, EM4305, Mifare UID cards.
- It can crack 13.56mHz encryption cards. (This device only supports partial sector encryption IC card, does not support all sectors encryption IC card). If your card is all sectors encryption, the device will show Decoding fails, please try to decode an upgraded version! Come with decoding software (working on Windows). To crack a encryption card, you need to connect the reade to a PC.
- The machine is plugged into the computer, there is a disclaimer when it is turned on. At this time, do not press the "OK" button on the machine. Enter my computer, open the removable disk and display the software and manual word files, the software instructions inside are copied to the computer. Double-click to open the software, and then press the "OK" button on the machine. (NOTE: if you press the "OK" button before opening the software, the software will not be displayed).