DTECH USB to UART TTL Serial 3.3V Adapter Cable 6 Wire End with FTDI Chip FT232 TX RX Signal for Windows 11 10 8 7 XP Vista (6ft, Black) 3.3V -6 wire end
DTECH USB to UART TTL Serial 3.3V Adapter Cable 6 Wire End with FTDI Chip FT232 TX RX Signal for Windows 11 10 8 7 XP Vista (6ft, Black)
Description
6-Foot FT232RL FTDI USB to TTL serial adapter cable (6 wire end) for 3.3V logic level serial communication It is built with FTDI FT232 chip, FTDI’s royalty-free VCP allow for communication as a standard COM port and D2XX ‘direct’ drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc. NOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on FTDI official website The original FTDI chip is embedded in the USB-A end; 6 wire end is with VCC (5V power) and GND (ground), as well as RXD, TXD, RTS and CTS at 3.3V logic level. Applications: Upgrading Legacy Peripherals TTL serial port to USB Interface Microcontroller UART or I/O, FPGA / PLD to USB Replace MAX232 type level shifters allowing for direct connection of products to PC Industrial Control / USB Software / Hardware Encryption Dongles Features - The I/O pins of the FTDI wire are configured to operate at 3V3 logic level - Entire USB protocol handled by the electronics in the cable; - UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity; - Data transfer rates from 300 to 3M baud rate at TTL levels; - Fully assisted hardware (RTS/CTS) or X-On / X-Off software handshaking; - Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required; - UHCI / OHCI / EHCI host controller compatible Specific Interfaces: USB 2.0 type A Male Port ; 6 wire end Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10,11 (32 and 64-bit); Mac OS 8/9 , OS-X; Linux 2.4 and greater What’s Included 1 x USB to Serial TTL Converter Cord 1 X User Manual
Features:
- 6 ft FTDI USB to UART TTL 3.3V serial adapter (with 6 wire end) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
- A genuine FTDI FT232 chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
- 6 feet USB to TTL serial cable (6 way output) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND
- FT232RL chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
- 6 pin TTL to USB serial converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE; ideal USB 2.0 UART debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.