DKARDU 2 pcs USB C QC 2.0 3.0 DC Voltage Trigger Test Module 9V 12V 20V 5A 100W E-Mark Type-C Adjustable Power with 26awg red and Black Cable(USB Input) MINI USB input
DKARDU 2 pcs USB C QC 2.0 3.0 DC Voltage Trigger Test Module 9V 12V 20V 5A 100W E-Mark Type-C Adjustable Power with 26awg red and Black Cable(USB Input)
Instructions: USB-C power supply must support the PD protocol Basic operation: Connect the module to USB-C PD power supply. The LED indicates the current voltage. If no LED is illuminated then it is currently at 5V. While holding S+ press S- to unlock the board. Press S+ to increase voltage. Press S- to decrease voltage. Reset to 5V: Press and hold the S- button while connecting the module to the power supply Quick key unlock: After powering on, while holding S+, quick press S- Quick key lock: After powering on, while holding S-, quick press S+ Permanent Key Lock: Press and hold the S+ button while connecting the module to the power supply. Press S+ or S- to enable or disable the key lock. If the key lock is enabled, then the voltage cannot be changed until it is unlocked. Test Mode: Press and hold S- and S+ simultaneously while connecting the module to the power supply. The output voltage will automatically cycle between all supported voltages.Package Includes:2 x Voltage Trigger Test Module(USB input)1 x 26awg red and black cable(30cm/11.81in)
Product Features
- Device power supply: Power all kinds of electronic devices with USB-C PD chargers and power banks; Test power supply capabilities
- Features: Supports up to 5A / 100W .Has the e-Mark chip necessary to unlock 5A output on 100W power supplies
- Trigger output: Trigger 5V, 9V, 12V, 15V, or 20V output (not all USB-C power supplies support all voltages); The module just performs the PD negotiation and passes the output
- Indicator light: LED voltage indicators; Retains setting after power loss
- Power supply connection: Power supply must be connected to the male end of the module