BAEASU 3-Pack 0.96 Inch 128x64 I2C OLED Display Module, SSD1306 Driver IIC Serial Self-Luminous Screen Board Compatible with Arduino Raspberry Pi Pico (Blue and Yellow) 3pcs
BAEASU 3-Pack 0.96 Inch 128x64 I2C OLED Display Module, SSD1306 Driver IIC Serial Self-Luminous Screen Board Compatible with Arduino Raspberry Pi Pico (Blue and Yellow)
Specifications: 0.96 inch OLED display chip: SSD1306 Interface Type: IIC / I2C-4PIN High Resolution: 128 64 Pixels Voltage: 3 V ~ 5 V DC Viewing Angle: greater than 160 degrees Low power consumption : Full Screen 0.08 w Operating Temperature: -30 Celsius ~ 70 Celsius Support many control chips: Fully compatible with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc Pin Definition: GND: OLED Power Ground VCC: OLED Power Positive 3.3-5 V SCL: OLED IIC Clock SDA: OLED IIC Data Line Note: OLED is self- luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally. 1 X 0.96 Inch I2C OLED Display 1 X Plastic stoage box
Product Features
- 0.96 inch,Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306, Communication: I2C/IIC Interface, only need two I / O ports.This oled display can be used with different machine easily
- This I2C oled display compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No need backlight and self-illumination, OLED display Module 128x64 provides plenty of space for displaying elements.