Vermont Gage - 111100400 Steel Go Plug Gage, Tolerance Class ZZ, 0.004" Gage Diameter 0.004 Inches
Vermont Gage - 111100400 Steel Go Plug Gage, Tolerance Class ZZ, 0.004" Gage Diameter
The Vermont Gage steel go (+) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of +.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.
Product Features
- Supplied with a certificate of accuracy traceable to National Institute of Standards and Technology (NIST)
- Go (+) gage for measuring the lower limit of a hole
- Available in a range of sizes from .0040 to 1.0005
- Made from tool steel 60/64 Rockwell c scale (Rc) cold stabilized for durability
- Class ZZ (tolerance of .0002) for longer wear
Related Products
ChgImposs Metric & Imperial & US...
ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metrisch 60 Degree Thread Pitch Gauge for Industrial Measurement
$91.00 AUD
ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metrisch 60 Degree Thread Pitch Gauge for Industrial Measurement Specifications: Features: - It is useful to check the tool angle when cutting threads on a metal lathe. - Check the angle on the thread cutting tool on the V-groove of the gauge. - It is 55 Degree &a...
Accusize Industrial Tools 0.011'...
Accusize Industrial Tools 0.011'' to 0.060'', 50 Pc Steel Plug Pin Gage Set, Minus, Class Zz, M0(-) 0.011"-0.060"
$196.00 AUD
Accusize Industrial Tools 0.011'' to 0.060'', 50 Pc Steel Plug Pin Gage Set, Minus, Class Zz, M0(-) Accusize Industrial Tools Minus Pin Gage Sets Accusize Minus Pin Gage Sets Class ZZEach gage is electro-etched with its actual size.Tolerance for minus set tolerance: +0.0000" / -0.0002"All gages are 2" long, center less lapped.Hardness: Each Accu...
Accusize Industrial Tools Premiu...
Accusize Industrial Tools Premium 5/16'' - 6", 6ps/Set Telescoping Gage Set, Stain Chrome Finished, 3602-5018
$245.00 AUD
Accusize Industrial Tools Premium 5/16'' - 6", 6ps/Set Telescoping Gage Set, Stain Chrome Finished, 3602-5018 Product Features Stain chrome finish Contact points are hardened tool steel and precision ground on the end measuring radius Rigid handle with self-centering system Smooth and constant spring tension Supplied with...
2 Pcs Stainless Steel Thickness ...
2 Pcs Stainless Steel Thickness Gauges, Wire Gauge Measurement Tool-Round Wire Cable Sheet Thickness Gage and Wire Thickness Gauge
$91.00 AUD
2 Pcs Stainless Steel Thickness Gauges, Wire Gauge Measurement Tool-Round Wire Cable Sheet Thickness Gage and Wire Thickness Gauge Features:1.Dual mark swg sae.swg: 0-36 standard,inch scale: 0.3125" - 0.007",the wire gauge is accurate for wire and metal.2.Our gauge is made of stainless steel,not iron or normal steel,most product in market are ma...
Spurtar 32 Blades Steel Feeler G...
Spurtar 32 Blades Steel Feeler Gauge Measurement Tool for Measuring Gap Width or Thickness
$91.00 AUD
Spurtar 32 Blades Steel Feeler Gauge Measurement Tool for Measuring Gap Width or Thickness Spurtar Tapered Feeler Gauge Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool (0.04-0.88 mm, 32 Blades) Spurtar Feeler Gauge Set is a 32-blade tapered feeler gauge set with both metric and inch readings. The tapered-end works...
Paint Thickness Gauge TC100 Car ...
Paint Thickness Gauge TC100 Car Coating Thickness Meter for Used Car Buyers, Paint Mil Thickness Meter Gauge Check The Car’s Original Coating Auto Car Paint Meter Black
$257.00 AUD
Paint Thickness Gauge TC100 Car Coating Thickness Meter for Used Car Buyers, Paint Mil Thickness Meter Gauge Check The Car’s Original Coating Auto Car Paint Meter Read more Read more PACKAGE: 1 TC100 car Coating Paint thickness gauge 1 Aluminum Substrate 1 Iron Substrate 1 Package Box 5 Calibration Coating Films 1 double language Manual 1 ...
GemRed Digital Depth Guage Heigh...
GemRed Digital Depth Guage Height Gauge for Router Table
$126.00 AUD
GemRed Digital Depth Guage Height Gauge for Router Table Product Features Measuring Range:0~80mm (0~3 1/8" ); Resolution:0.05mm(0.002") ; Accuracy: 0.1mm (0.004") Two measure mode: relative and absolute measurement Three measure units: in/mm/fraction(only shows fraction when the number HAS equivalent fraction) ...
Wire Gauge Measurement Tool, Met...
Wire Gauge Measurement Tool, Metal Gauge Thickness Tool, Stainless Steel Thickness Gauges, 2 Pack Sheet Metal Tools
$91.00 AUD
Wire Gauge Measurement Tool, Metal Gauge Thickness Tool, Stainless Steel Thickness Gauges, 2 Pack Sheet Metal Tools Specification: - color:as the picture. - material:stainless steel, rust proof, anti-corrosion. - package:2 pcs. Measuring range(imperial): 24GA (.0239) 22GA (.0299) 20GA (.0359) 18GA (.0478) 16GA (.0598) 14GA (.0747) 1/8" (.0125) 1...
HHIP 4103-0200 Replacement Pin G...
HHIP 4103-0200 Replacement Pin Gage, P-1 (-0.0002) Tolerance, 0.2" 0.200"
$71.00 AUD
HHIP 4103-0200 Replacement Pin Gage, P-1 (-0.0002) Tolerance, 0.2" Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002". Product Features Re...
2 Pack Thread Pitch Gauge, 51...
2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool
$134.00 AUD
2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool Applied To Measure Thread And External Thread Tooth Pitch Features: - It is useful to check the tool angle when cutting threads on a metal lathe. - Check the angle...
Accusize Industrial Tools 0.011'...
Accusize Industrial Tools 0.011''-0.060'', 50 Pc Steel Plug Pin Gage Set, Plus, Class Zz, P0(+) 0.011"-0.060"
$200.00 AUD
Accusize Industrial Tools 0.011''-0.060'', 50 Pc Steel Plug Pin Gage Set, Plus, Class Zz, P0(+) Accusize Industrial Tools P0(+) to P7(+) Plus Pin Gage Sets Accusize P0(+) to P7(+) Plus Pin Gage Sets Class ZZEach gage is electro- etched with its actual size.Tolerance for plus set tolerance: +0.0002" / -0.0000“All gages are 2" long, centerless lap...
2 Pack Feeler Gauge with 32/26...
2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair
$127.00 AUD
2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair PACKAGE CONTENT Feeler Gauge with 32 Blades x 1 Feeler Gauge with 26 Blades x 1 Feeler Gauge with 16 Blades x 1 FEATURES 3 types in one set High precision and ...
iGaging 0-4" Electronic Digital ...
iGaging 0-4" Electronic Digital Depth Gauge SnapDepth 0.0005" Inch/Metric/Fractions Tire Tread Gage
$127.00 AUD
iGaging 0-4" Electronic Digital Depth Gauge SnapDepth 0.0005" Inch/Metric/Fractions Tire Tread Gage Professional Precision 2 in 1 Digial Indicator & Depth Gage 2 measuring tools for the price of 1! This tool funtions as an indicator or as depth gage! Rod extends to 1", 2", 3" and 4" with the included extension bars to measure deeper. Feature...